ATV

  • Sportsman XP Rear Drive Axles

    Brand new complete CV Axle Assembly for the REAR right or left in many Sportsman models. Fully Assembled inboard / outboard cv joints with neoprene boots. Replacement 1 Year Warranty (Excludes Lift Kits & Torn Boots). Choose your model from the drop down below:

    $124.95
    $112.46
  • Sportsman XP Stators

    Complete replacement stator for your Sportsman 550, 850 and 1000. This is an excellent quality RM stator brand replacement unit. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material.  Choose your model from the list below.

    $159.95$199.95
    $143.96$179.96

    Sportsman XP Stators

    $159.95$199.95
    $143.96$179.96
  • Sportsman XP Tie Rod Ends

    This high quality replacement rod end kit is the perfect cost effective alternative to the expensive OEM part. Replace that sloppy, worn out or broken rod end and get it factory tight again! Direct replacement will thread right on and install without any modifications. Comes with a new jam nut, castle nut and cotter pin. Sold EACH. Replaces Polaris part number 7061174, 7061175, 1824007 and All Balls 51-1050. Choose Inner or Outer from the drop down below. Fits the following models:

    2010-14 Sportsman 550

    2010-19 Sportsman 850

    2015-19 Sportsman 1000

    Replaces Polaris Part Number: 7061174, 7061175, 1824007

    $19.95$34.95
    $17.96$31.46

    Sportsman XP Tie Rod Ends

    $19.95$34.95
    $17.96$31.46
  • Sportsman XP Wheel Bearings

    These quality bearings are an exact fit and will outlast the stock bearings. Fits the following models with part number 3514699 and 3514627. Please check out the bearing install tool we have below. Fits the following Polaris ATV’s:

    2015-22 Sportsman 1000 (Including Touring)

    2009-22 Sportsman 850 XP (Including Touring/X2)

    2009-14 Sportsman 550 (Including Touring/X2

     

    $19.95$69.95
    $17.96$62.96

    Sportsman XP Wheel Bearings

    $19.95$69.95
    $17.96$62.96
  • Sportsman XP Wheel Lug Nuts for STEEL Wheels

    Brand new M10 x 1.25 wheel lug nuts for many Sportsman 550/850/1000 XP models with STEEL rims. May fit both the front and rear studs depending upon the model. Exact replacement for Polaris 7547363. You can get either ONE or a SET OF FOUR lug nuts. Fits the Following Polaris models:

    2009-14 Sportsman 550

    2009-16 Sportsman 850

    2016 Sportsman 1000 (Factory steel wheels)

     

    Exact replacement for Polaris 7547363.

    $4.95$7.95
    $4.46$7.16

    Sportsman XP Wheel Lug Nuts for STEEL Wheels

    $4.95$7.95
    $4.46$7.16
  • $12.95 $6.48

    Sta-Dri

    $12.95 $6.48
  • Trail Blazer 220 Outer Tie Rod End Bolt

    Replace your old worn out tie rod end bolts with these quality replacements from Quad Logic. Make your tie rod instillation simple and easy and replace the hardware at the same time! We offer a full line of replacement Polaris hardware to help with your machine service or restoration. This bolt attaches the outer tie rod end to the front hub on many Polaris Sportsman RZR and Ranger models.

    2 Bolts are required for each machine 1 Bolt per side. Please select the quantity in the drop down box.

    Fits The Following Models;

    2001-13 Trailblazer 220

    2002 Xplorer 400

    2002 Xpedition 325

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

     

    $7.95$11.95
    $7.16$10.76

    Trail Blazer 220 Outer Tie Rod End Bolt

    $7.95$11.95
    $7.16$10.76
  • Trail Blazer 250 Clutch Cover

    Crack your clutch cover? Replace it before your clutches get wet and leave you stranded on the trail. Quad Logic now offers the quality replacement clutch covers for your Polaris. These covers simply bolt on in place of the factory cover.  While replacing your clutch cover make sure to check out our other listings for complete clutch cover gaskets, screws and drain plug kits. Choose from the clutch cover only, or the clutch cover with seal and screws. Select your model year and cover from the dropdown below.

    REPLACES POLARIS PART NUMBER(S): 5433451, 5433451-070, 5433451-328, 5438142-070, 5433542, 5431961, 5521301, 7512093 & 7512094

    $139.95$154.95
    $125.96$139.46

    Trail Blazer 250 Clutch Cover

    $139.95$154.95
    $125.96$139.46
  • Trail Blazer 330 Spring Retainer

    Replacement Aluminum Spring Retainer. Sold individually or in a pair. (Spring NOT included)

    FITS THE FOLLOWING MODELS:

    2008-’13 TRAIL BLAZER 330
    2000-’01 TRAIL BOSS 325
    2008-’13 TRAIL BOSS 330

    REPLACES POLARIS PART #: 5630885 and 5251753

    $14.95$22.95
    $13.46$20.66

    Trail Blazer 330 Spring Retainer

    $14.95$22.95
    $13.46$20.66
  • Trail Blazer Ball Joint to Strut Retainer Screw

    Are you replacing the ball joints on your Sportsman or any other Polaris with strut style front suspension? These direct replacement screws are a must have! Being on the bottom of the strut the original screws are going to be full of dirt and debris from the trail. These screws bolt the retainer clip holding the lower ball joint to the bottom of the front strut. Our screws are come with thread locker already applied to the threads just like OEM Polaris. These are replacements for Polaris part numbers 7512284.

    2 Screws are required on each side. 4 Screws are required to replace on both sides of the machine. Select your QTY on the dropdown bar.

    Fits the following models;

    2003-13 Trail Boss 330

    1988-01 Trail Boss 250

    1990-06 Trail Blazer 250

    2008-13 Trail Blazer 330

    2003 Trail Blazer 400

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

     

    $6.95$9.95
    $6.26$8.96

    Trail Blazer Ball Joint to Strut Retainer Screw

    $6.95$9.95
    $6.26$8.96
  • Trail Blazer Front STAINLESS Brake Lines

    Replace that swollen or blown OEM rubber brake line with this higher quality stainless steel brake line. Not only will it last much longer but you will get better brake feel and less fade. These brake lines are manufactured in the USA and are fully tested to 3000 psi!   Choose LEFT or RIGHT brake line from the drop down below.  USE CHART BELOW TO HELP SELECT THE CORRECT CABLE.

    YEAR MODEL FRONT LH CABLE FRONT RH CABLE
    2001-’02 TRAIL BLAZER 250 1910474 1910475
    2009-’13 TRAIL BLAZER 330 1910838 1910839
    2001-’02 TRAIL BOSS 250 1910474 1910475
    2001 TRAIL BOSS 325 1910474 1910475
    2005-’13 TRAIL BOSS 330 1910838 1910839

     

    REPLACES POLARIS PART NUMBER(S): 1910838, 1910839, 1910474 and 1910475

    $69.95
    $62.96
  • Trail Blazer Gearcase/Transmission Mounting Bolts

    Brand new M10 x 18mm gearcase and transmission mounting bolts. These also include the Loctite patch just like the originals! Sold individually or as a pair.

    FITS THE FOLLOWING MODEL(S):

    1999-’03 TRAIL BLAZER 250
    2003 TRAIL BLAZER 400

    ALSO FITS…

    2015 HAWKEYE 325
    2011-’14 HAWKEYE 400
    2015 SPORTSMAN ETX
    2000-’02 TRAIL BOSS 250
    2001 TRAIL BOSS 325
    2003 TRAIL BOSS 330
    1999-’02 XPLORER 400

     

    REPLACES POLARIS PART NUMBER(S): 7517632

    $6.95$9.95
    $6.26$8.96

    Trail Blazer Gearcase/Transmission Mounting Bolts

    $6.95$9.95
    $6.26$8.96
  • Trail Blazer Primary Clutch Spider Shim

    Brand new Trail Blazer Clutch Shim.  This yellow zinc plated large .020″ washer shim is used for shimming the primary or secondary clutch. This washer is used to adjust the belt sheave clearance on the primary or as a shim behind the helix on the secondary. May be used on primary and/or secondary depending upon the year and model.

    Check the Polaris parts diagrams for your machine.  Exact replacement Trail Blazer Clutch Shim for Polaris 5210752.

    Sold as EACH or as a PAIR.

    Used on the following machines and more:

    1990-06 Trail Blazer 250

    2008-13 Trail Blazer 330

    2003 Trail Blazer 400

    1995-97 Big Boss 400L

    1989-92 Big Boss 500

    1986-13 Trail Boss (All Models)

    1999 Worker 335

    1999-01 Worker 500

    2000-01 Xplorer 250

    1996-99 Xplorer 300

    1995-02 Xplorer 400

    1997 Xplorer 500

    1996 Xpress 300

    1996-97 Xpress 400

    1993 250

    1994-95 300

    1994 6×6 300

    94-96 400L

    1994-96 400L 6×6

    1993 350L

    1999-01 Diesel

    2004-05 ATP 330

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $7.95$9.95
    $7.16$8.96
    100-5046 Polaris-Clutch-Spider-Shim-5210752-Each 100-5046-Polaris-Clutch-Spider-Shim-5210752-Pair

    Trail Blazer Primary Clutch Spider Shim

    $7.95$9.95
    $7.16$8.96
  • Trail Blazer Rear Wheel Hub Push Nuts

    Brand new replacement rear hub push nuts for the Trail Blazer 250, 330 & 400. These push nuts are used on the rear wheel hub bolts. Sold as a pack of 2 or 8.

    FITS THE FOLLOWING MODEL(S):

    1993-’06 TRAIL BLAZER 250
    2008-’13 TRAIL BLAZER 330
    2003 TRAIL BLAZER 400

    Also Fits…

    1993-’02 TRAIL BOSS 250
    2001 TRAIL BOSS 325
    2003-’13 TRAIL BOSS 330
    1992 TRAIL BOSS 350L
    1995-’97 BIG BOSS 400L
    1998-’99 BIG BOSS 500
    2000-’01 XPEDITION 325
    2000-’01 XPEDITION 425
    2000-’02 XPLORER 250
    1996-’99 XPLORER 300
    1999-’02 XPLORER 400
    1996-’98 XPLORER 400L
    1996-’99 XPRESS 300
    1996-’97 XPRESS 400
    1994-’99 SPORT 400L

    REPLACES POLARIS PART NUMBER(S): 7670081

    $6.95$14.95
    $6.26$13.46

    Trail Blazer Rear Wheel Hub Push Nuts

    $6.95$14.95
    $6.26$13.46
  • Trail Blazer STEEL Shifter Bellcrank

    These shift bellcranks are a weak point on the shifter mechanism on all Polaris models. They use a soft aluminum and the splines easily strip out under hard use. We eliminated the problem and made them out of a heavy duty plate steel.  The bellcrank is then zinc plated for corrosion resistance.  Replace it once with our heavy duty steel bellcrank and forget about it!  Choose your model from the drop down below.

    Replaces Polaris part number 3234148 and3233153.

     

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $19.95
    $17.96

Main Menu