RZR PRO XP

  • Accessories

    Accessories (8)

  • Fuel/ Intake

    Fuel/ Intake (2)

  • Tools

    Tools (2)

  • Front Differential

    Front Differential (1)

  • Electrical

    Electrical (6)

  • Cooling System

    Cooling System (1)

  • Driveline

    Driveline (1)

  • Suspension

    Suspension (3)

  • Body

    Body (4)

  • Lighting

    Lighting (2)

  • Engine

    Engine (1)

  • Clutching

    Clutching (2)

  • ATV UTV 50″ 60″ 72″ Snow Plow Blade 16″ Marker Kit for Moose Utilities Plows – Same as M91-50040

    Add these corner markers to any Moose ATV/UTV snow plow blade to offer better visibility and safety. Flexible yet hard plastic is made to withstand severe cold weather without cracking or breaking. Integrated stamped steel mounting base. Simple to install, just drill one hole in each upper corner of the blade and bolt in place with the included hardware. 16″ tall. Sold as a set. The perfect replacement to the Moose M91-50040 plow markers.

    $24.95 $22.46
  • Polaris EFI Fuel Pump Retaining Nut Removal / Install Tool

    Time to service the fuel pump on your Polaris machine? Check out this heavy duty tool from Quad Logic! The fuel pump retainer nut often times becomes stuck and very difficult to remove. Order our tool before attempting to remove the nut the incorrect way. If you do happen to break the factory nut Quad Logic also offers replacements! We developed this tool to work with the OEM fuel tank nut as well as many replacements. This retaining nut tool works with most Polaris EFI Sportsman, Scrambler, Ranger, RZR Models.

    FITS THE FOLLOWING MODELS:

    2011-21 RZR (All Models)

    2007-21 Sportsman (All EFI Models)

    2009-21 Ranger (All EFI Models)

    2009-21 Scrambler (All EFI Models)

     

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $24.95 $22.46
  • Polaris RZR Pro XP Front Differential Roll Cage Sprague with Clips

    Quit breaking the stock roll cage, get this machined billet aluminum unit and forget about it!  The original roll cages are notorious for cracking and breaking, replace it with this updated severe duty billet ALUMINUM version. We offer a full one year warranty against breakage of this cage. Brand new full set of 24 spring clips included! Replaces Polaris part # 3236208. This is designed and made in the USA!

    FITS THE FOLLOWING RZR MODELS:

    2020-’22   RZR PRO XP
    2022-’22   RZR PRO XP 4
    2020         RZR TURBO PRO XP

    Replaces Polaris part #3236208

    $134.95 $121.46
  • Polaris Seat Belt Harness Override Bypass Plug

    Seat belt override plug has been designed to close the open loop system and avoid limp mode, allowing you to bypass the factory governor (15 mph) when seat belts are not connected. This allows you use the full potential of your motor. No wiring skills required for this install, all you have to do is unplug the old seat belts and plug in the new override. Must be used when installing aftermarket four and five point harnesses. Works on all Polaris models that come standard with the seat belt safety feature.

    $8.95 $8.06
  • PRO ARMOR 8 Speaker Soundbar with Bluetooth

    Pro Armor® Bluetooth® Sound Bars. The 8 speaker sound bar is designed for easy installation to have you rocking or rolling in no time. These powered self-contained units feature midrange/midbass driver speakers two dedicated tweeters and integrated amplifiers. You can play music directly from your device using either the provided 3.5mm wired input or through the integrated Bluetooth® connection. Large buttons allow you to control the unit while on the go even with thick riding gloves. These work great as a stand-alone audio solution or you can make it part of a larger full-sound experience by adding audio pods and more. Durable extruded aluminum housing finished in black will provide years of trouble free sound.

         OVERVIEW & SPECS

    • Recessed Mounting System Wont Impede Sight Lines
    • Integrated 100 Watt Amplifier
    • Four High-Energy Midrange Drivers
    • Two Pure Titanium Dome Tweeters With Neodymium Magnets
    • 10 Meter Bluetooth® Range
    • 3.5mm Auxiliary Input Plug and 2 Volt Preamp Output Voltage
    • Oversized Rubber Buttons
    • Speaker Length 25.79″
    • Depth 2.32″
    • Hang Height 4.14
    • Bluetooth Range 10 Meter
    • Preamp Outputs to connect other audio components

     

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $299.95 $269.96
  • Pro XP Radiator Cap

    Having cooling system problems? It may be your radiator cap. Replace it with this stock replacement 18 psi cap. This radiator cap is a direct replacement for Polaris part number 1241379. Check out Quad Logic for all your Polaris cooling system parts!

    This cap fits the following:

    2020-24 RZR Pro-XP

    2023-24 RZR Pro-R

    Replacement for Polaris part number 1241379

    At Quad Logic in Ramsey, Minnesota (USA), we ship your items for free within 24 hours.  And we provide you exceptional customer service at every step.

    Looking for something else?  Our website has a fraction of our entire inventory of tens of thousands of parts.  Contact us with all of your ATV and UTV parts needs.

    Check out our YouTube channel for various installs and fixes.

    $17.95 $16.16

    Pro XP Radiator Cap

    $17.95 $16.16
  • Roll Pin Punch Tool

    Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:

    Polaris ATV’s from 1993 to Current

    Polaris RZR UTV’s from 2008 to Current

    Polaris Ranger UTV’s from 2003 to Current

    $24.95 $22.46

    Roll Pin Punch Tool

    $24.95 $22.46
  • RZR 6 Amp Diode

    This diode allows electricity to flow in one direction but not the other.  If you are getting burnt out electrical components or power surges this could be the culprit.  This new diode is the exact same 6 amp as the original.  The sealed unit simply plugs into place on the wire harness.  The connectors are different sizes so you cannot install in wrong!  This fits many Polaris ATV and UTV models. SOLD EACH. Replaces Polaris part number 2411035.

    Replaces Polaris part number 2411035.

     

    $16.95 $15.26

    RZR 6 Amp Diode

    $16.95 $15.26
  • RZR 900 Lower LEFT Side A-Arm, LH Control Arm

    New replacement lower a-arm for your Polaris RZR.  This is the lower LEFT Side (Drivers Side) a-arm.  This quality a-arm is a direct replacement to the original.  Powdercoated black finish.  Sold Each.  Replaces the Polaris # 1018356-458 and 1018356-293.  Fits the following models:

     
    2013 RZR 900 (All Models Including RZR-4 and Jagged X)
     
    2014 RZR 900 Only (Does NOT fit RZR-4 or Jagged X)

    Replaces Polaris Part Number: 1018356-458 and 1018356-293

    $109.95 $98.96
  • RZR 900 Lower RIGHT Side A-Arm, RH Control Arm

    New replacement lower a-arm for your Polaris RZR.  This is the lower Right Side (Passenger Side) a-arm.  This quality a-arm is a direct replacement to the original.  Powdercoated black finish.  Sold Each.  Replaces the Polaris # 1018357-458 and 1018357-293.  Fits the following models:

     
    2013 RZR 900 (All Models Including RZR-4 and Jagged X)
     
    2014 RZR 900 Only (Does NOT fit RZR-4 or Jagged X)

    Replaces Polaris Part Number: 1018357-458 and 1018357-293

    $109.95 $98.96
  • RZR M10 x 45mm Roll Bar Cage Bolts & Nuts (SET)

    Brand new roll cage bolts and nylock nuts used on many Polaris RZR 900, 1000 and Turbo models.  Bolt size is M10 x 1.25 x 45mm. Please check your size before ordering as there are a couple different bolts used on each rollcage.  Whether replacing stripped bolts or building your own rollcage, these bolts are the same as the factory bolts so you know they will hold up.  Exact replacement for Polaris 7519906 and 7547746. Includes (2) bolts and (2) nuts.

    Exact replacement for Polaris Part Numbers: 7519906 and 7547746

    $9.95 $8.96
  • RZR M10 x 55mm Roll Bar Cage Bolts & Nuts (SET)

    Brand new roll cage bolts and nylock flange nuts used on many Polaris RZR 900, 1000 and Turbo UTV models. Bolt size is M10 x 1.25 x 55mm. Please check your size before ordering as there are a couple different bolts used on each rollcage. Whether replacing stripped bolts or building your own rollcage, these bolts are the same as the factory bolts so you know they will hold up. Exact replacement for Polaris 7519956 and 7547333. Includes (2) bolts and (2) nuts.

    Exact replacement for Polaris Part Numbers: 7519956 and 7547333

    $9.95 $8.96
  • RZR Pro XP Black Halo Headlights (PAIR)

    Replace your broken Pro XP headlights with our Halo replacement headlights. With clear lenses and black inner housings, not only do they look great, they also shine bright. Sold as a PAIR.

    FITS THE FOLLOWING MODELS: 

    2022 RZR PRO R
    2020-’22 RZR PRO XP 4
    2020-’22 RZR PRO XP

    ALSO FITS THE…..

    2022 RZR TURBO R 4
    2022 RZR TURBO R


    REPLACES POLARIS PART NUMBER(S): 2414538 and 2414539

     

    $349.95 $314.96
  • RZR PRO XP Black Taillights

    Get that custom look with these Smoke Blackout Taillights!  They appear black when off but light up bright red when you hit the brakes.  Full LED brake lights never burn out like halogens.  Fits and works just the like expensive factory lens except with the added cool factor of being black. Sold as pair and will fit the left and right side. Replaces Polaris part number 2415177 and 2415178.

    FITS THE FOLLOWING MODELS:

    2022-24  RZR Pro R
    2022-24  RZR Pro R 4
    2020-24  RZR Pro XP
    2020-24  RZR Pro XP 4

    REPLACES POLARIS PART NUMBER(S): 2415177 and 2415178

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
    Returns are subject to 15% restocking fee.
    $129.95 $116.96

    RZR PRO XP Black Taillights

    $129.95 $116.96
  • RZR Pro XP Hood Accent Vent

    Add a unique custom look to your XP Pro Hood with our Quad Logic Hood Accent Vent.  Not only will this vent give a great new look to your machine, this vent kit will help disperse heat from your radiator helping it cool.  Kit includes black and silver plates and 26 rivets for installation. Please note that some cutting of the hood is required for installation.

    FITS THE FOLLOWING MODELS:

    2020-’22    RZR Pro XP (All Models except PRO XP R)

     

    Works on Part number: 545766-070

     

     

    $69.95 $62.96
  • RZR Pro XP Ignition Coil Pigtail Harness

    New RZR Pro XP Ignition Coil Pigtail Harness. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail.  Our pigtail fits the Polaris OE: 4015017 Ignition Coil. 

    FITS THE FOLLOWING MODEL(S):

    2022-’24 RZR PRO R
    2022-’24 RZR PRO R 4
    2020-’24 RZR PRO XP
    2020-’24 RZR PRO XP 4
    $19.95 $17.96

Main Menu