Polaris Magnum Parts and Accessories

  • Accessories

    Accessories (11)

  • Engine

    Engine (11)

  • Brakes

    Brakes (4)

  • Fuel / Intake

    Fuel / Intake (9)

  • Clutching

    Clutching (8)

  • Front Differential

    Front Differential (2)

  • Electrical

    Electrical (10)

  • Steering

    Steering (3)

  • Body

    Body (6)

  • Exhaust

    Exhaust (1)

  • Driveline

    Driveline (5)

  • Cooling System

    Cooling System (1)

  • Suspension

    Suspension (2)

  • Tools

    Tools (2)

  • Lighting

    Lighting (2)

  • ATV UTV 50″ 60″ 72″ Snow Plow Blade 16″ Marker Kit for Moose Utilities Plows – Same as M91-50040

    Add these corner markers to any Moose ATV/UTV snow plow blade to offer better visibility and safety. Flexible yet hard plastic is made to withstand severe cold weather without cracking or breaking. Integrated stamped steel mounting base. Simple to install, just drill one hole in each upper corner of the blade and bolt in place with the included hardware. 16″ tall. Sold as a set. The perfect replacement to the Moose M91-50040 plow markers.

    $24.95 $22.46
  • ATV UTV Replacement Steel Winch Cable (3/16″ x 45′)

    Brand new universal steel winch cable for most 1500# to 4000# ATV and UTV winches. Size is 3/16″ x 45′ long. Has a looped end for attaching your hook and a straight welded end for attaching to your drum. Please remove your old cable to make sure it attaches to the drum in the same way before ordering.

    $24.95 $22.46
  • ATV UTV Synthetic Winch Rope Cable (3/16-50′) Superwinch Warn KFI Badland Moose

    Brand new universal steel winch cable for most 1500# to 4000# ATV and UTV winches. Size is 3/16″ x 45′ long. Has a looped end for attaching your hook and a straight welded end for attaching to your drum. Please remove your old cable to make sure it attaches to the drum in the same way before ordering.

    $49.95 $44.96
  • Magnum .040 (79.45mm) Piston & Top End Gasket Set

    This top end rebuild kit includes a brand new .040″ OVERSIZE Namura piston with rings and piston pin.  Your cylinder will REQUIRE boring to use this piston kit!  This can be done at a machine shop locally or we can bore it for you at an additional cost, call us for details. You will also receive a top end gasket kit to rebuild the top end of your Polaris 330 four stroke motor.  Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit.

    Namura pistons are direct OEM replacements with a few key advantages.  First is the Teflon/Molybdenum coating on the skirts to increase heat transfer, reduce friction and reduces scuffing and seizures.   Machined smooth heads and anodized domes increase durability and can even add horsepower and fuel economy.  Lastly, the Hypereutectic casting process provides a higher silicon content for reduced expansion rates and additional wear resistance.  Namura pistons are simply the best value on the market.  All the advantages of a top of the line piston at a great price!

    Include a new .040″ (79.45mm) Oversize piston kit and all of the following top end gaskets shown in the photo including:

     

    • Head Gasket
    • Base Gasket
    • Valve Cover O-Ring
    • Exhaust Gasket
    • Breather Cover Gasket
    • Valve Seals
    • Tensioner Gasket

     

    This piston and gasket kit fits the following models:

    2004-05 ATP 330

    2003-06 Magnum 330

     

    $119.95 $107.96
  • Magnum (1999-2001) REAR Brake Caliper

    Is your rear caliper stuck, broke, or simply worn out? Don’t go to the dealer! This caliper is an exact reproduction of the OEM unit. This caliper comes ready to use, it even includes new semi metallic brake pads.

    FITS THE FOLLOWING MODEL(S):

    2000-’01 MAGNUM 325
    1999-’01 MAGNUM 500

    REPLACES POLARIS PART NUMBER(S): 1910270, 1910367, 1910449 and 1910691

     

    $79.95 $71.96
  • Magnum 3 Way Fuel Shutoff Valve and NUT

    Exact replacement 3-way fuel shut off valve including mounting nut for your Polaris ATV by the original manufacturer. This is not a cheap Chinese reproduction like the other guys are selling! Three way valve for on, off, and reserve. Also includes the new plastic mounting nut!! If you have a slow leak it is bound to get worse, replace it now at a fraction of the dealer cost. Replaces Polaris part number 7052161. Fits most the following Polaris ATV’s:

    2004-05 ATP 330
    1999-01 Diesel
    2000-02 Magnum 325
    2003-06 Magnum 330
    2000-03 Magnum 500
    2010 Outlaw 450 S
    2009-11 Outlaw 525
    1998-02 Scrambler 400
    1998-99 Sport 400
    1999-00 Sportsman 335
    2000-02 Trail Boss 325
    2003-09 Trail Boss 330
    2008-09 Trail Blazer 330
    2003 Trail Blazer 400
    1999-01 Worker 335/500
    2000-01 Xplorer 250
    1997-99 Xplorer 300
    1997-02 Xplorer 400
    1997 Xplorer 500
    1997-99 Xpress 300/400

    Replaces Polaris Part Number: 5432733 and 7052161

    $14.95 $13.46
  • Magnum 325 330 500 Gates G-Force Workhorse Drive Belt 19G4006E

    Gates G-Force® Workhorse Continuously Variable Transmission (CVT) Belts

    Gates G-Force Workhorse CVT belts, are engineered to handle the toughest tasks and trails.

    • Up to 2x the life of the G-Force Belt.
    • 45% increased heat tolerance.
    • Power for hauling heavy loads across aggressive terrain
    • Improved durability, crack & wear-resistance.

    Quad Logic is now a Gates distributor for all your Polaris ATV and UTV belt needs! These belts are tried and true, torture tested for years.  We trust them on all our machines and so should you.  They are a much better value than the OEM Polaris belts but probably exceed the performance at the same time.

     
    This G-Series belt is a perfect replacement and /or performance belt for your machine.  The top cogs offer better cooling and the aramid cords make it extremely strong.  
    This Gates 19G4006E G-Force Workhorse belt replaces Polaris part number 3211069 and fits the following machines and more:
     
    Please read this list carefully, as Polaris used a few different belts on different models:
    2000-01  Magnum 325 
    2004       Magnum 330
    1998-02  Magnum 500 (All Models Except 6×6)

    REPLACES POLARIS PART NUMBER(S): 3211069

    $84.95 $76.46
  • Magnum 325 330 Intake Valve

    New replacement engine EXHAUST valve for most 1999-2013 Polaris models using the 325cc and 330cc engines. Get your Polaris engine running like new with quality parts from Quad Logic. Replaces Polaris part number 3086441. Sold EACH.

    Fits the following models:

    2000-02 Magnum 325

    2003-06 Magnum 330

    Replaces Polaris part #3086441.

    $24.95 $22.46
  • Magnum 325 330 Top End Gasket Set

    Kit includes head gasket, base gasket, breather cover gasket, valve cover o-ring, valve seals and exhaust gasket to rebuild the top end of your Polaris 325 or 330 motor. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following top end gaskets shown in the photo including:

    Head Gasket
    Base Gasket
    Valve Cover O-Ring
    Exhaust Gasket
    Breather Cover Gasket
    Valve Seals
    Tensioner Gasket

    This gasket kit fits the following models:
    2004-05 ATP 330
    2000-02 Magnum 325
    2003-06 Magnum 330
    2003-13 Trail Boss 330
    2008-13 Trail Blazer 330
    2000-02 Xpedition 325

    $39.95 $35.96
  • Magnum 325 Carburetor

    Don’t make the mistake of buying one of those dirt cheap carbs!  We have tried many of them with disturbing results, there was just no way to get them tuned properly.  We spent countless hours tuning just to end up pulling them back off.  So we went ahead and worked with a carburetor manufacturer that understands the issues and the result is the next best carburetor to the original Mikuni!

    We physically developed and tested these carbs to ensure they will work properly on your Sportsman or Magnum.  Depending upon your year, modifications, elevation, etc, you may need to do some final tuning to finish dialing it in.  However, we have you covered!  Not only do we include complete instructions but we include extra pilot jets and main jets in the rare case you will have to re-jet it.  Most machines this will just bolt on and go.

    What else sets our carb apart?  Check out the cool billet aluminum side cover!  Its black anodized with our Quad Logic gear logo.  All the other carbs use a plastic side cover and they crack all the time.  No need to worry about that with this carb.

    But wait, there’s more!  Have you ever tried to remove the brass choke nut?  This is a nightmare as you cannot get a wrench on it due to its location.  The only thing you can normally try is a large pliers but you end up shredding the soft brass.  We will save you a ton of frustration by including one of our new choke nut wrenches.  This makes quick and easy work of swapping over the choke cable.

    This is a brand new complete Quad Logic brand 34mm carburetor for your Polaris ATV.  Got a really dirty or clogged up carb? Machine just won’t run right no matter what you do?  At this price you can just replace the entire carb!  Ready to install and accepts all your stock cables and lines just like the OEM carburetor.  Throttle valve and all jets are already installed.  No modifications required to install but may need some final tuning/adjustments.  Will fit the following models:

    2000-02 Magnum 325

    2000-02 Trail Boss 325

    2000-02 Xpedition 325

    $179.95 $161.96

    Magnum 325 Carburetor

    $179.95 $161.96
  • Magnum 330 .020 (78.95mm) Piston & Top End Gasket Set

    This top end rebuild kit includes a brand new .020″ OVERSIZE Namura piston with rings and piston pin.  Your cylinder will REQUIRE boring to use this piston kit!  This can be done at a machine shop locally or we can bore it for you at an additional cost, call us for details. You will also receive a top end gasket kit to rebuild the top end of your Polaris 330 four stroke motor.  Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit.

    Namura pistons are direct OEM replacements with a few key advantages.  First is the Teflon/Molybdenum coating on the skirts to increase heat transfer, reduce friction and reduces scuffing and seizures.   Machined smooth heads and anodized domes increase durability and can even add horsepower and fuel economy.  Lastly, the Hypereutectic casting process provides a higher silicon content for reduced expansion rates and additional wear resistance.  Namura pistons are simply the best value on the market.  All the advantages of a top of the line piston at a great price!

    Include a new .020″ Oversize piston kit and all of the following top end gaskets shown in the photo including:

     

    • Head Gasket
    • Base Gasket
    • Valve Cover O-Ring
    • Exhaust Gasket
    • Breather Cover Gasket
    • Valve Seals
    • Tensioner Gasket

    This piston and gasket kit fits the following models:

    2004-’05  ATP 330
    2003-’06  Magnum 330

    $119.95 $107.96
  • Magnum 330 500 Dowel Pin

    NEW Polaris Magnum 330 500 Dowel Pin. This pin sits inside the two output hubs in the front differential. Pin measures 1″ x 0.5″ x 0.5″. Replaces Polaris part number 3233928.

    FITS THE FOLLOWING MODEL(S):

    2003-’06 MAGNUM 330
    2002 MAGNUM 500

    REPLACES POLARIS PART NUMBER(S): 3233928

    $9.95 $8.96
  • Magnum 330, 325 Airbox to Carburetor Boot

    Replace your cracked Polaris Intake boots with quality replacements from Quad Logic. We offer a full lineup up replacement rubber intake parts for most Polaris models. This rubber boot is specifically made to meet OEM quality standards and keep your machine operating like new. This listing is a replacement boot that fits between the air box and the carburetor on Polaris Magnum 325 models. Specific applications are listed below. This product directly replaces Polaris part number 5411588. Please check the Polaris parts diagrams to ensure proper fitment.

    Fits the following models;

    2000-02 Magnum 325

    2003-05 Magnum 330

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $14.95 $13.46
  • Magnum 425 Air Filter

    Don’t ignore that dirty air filter. This can rob a ton of power from your machine and allow dirt and impurities into the engine. Drop in this new filter and your Magnum will thank you.

    FITS THE FOLLOWING MODEL(S):

    1995-’98 MAGNUM 425

    ALSO FITS…

    1998-’99 BIG BOSS 500
    1995-’02 SCRAMBLER 400
    1996-’99 SPORT 400L
    1999-’00 XPLORER 400


    REPLACES POLARIS PART NUMBER(S): 1253118

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $14.95 $13.46

    Magnum 425 Air Filter

    $14.95 $13.46
  • Magnum 425 Heavy-Duty Flywheel

    New heavy-duty flywheel rotor for Polaris ATVs is a well-priced solution to problems with the OEM flywheel, and an excellent alternative to all the mechanical troubles you can encounter with a repair.

    Features

    • Built to OEM size Fits precisely in your ride: install it and forget it.
    • Improved epoxy Uses high temperature epoxy that is stronger than OEM, eliminating the possibility of magnet detachment.
    • High grade steel capping Prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator.
    • Precise balancing Eliminates crankshaft vibrations for longer engine longevity.
    • Shop with confidence One year warranty. All products are tested.


    FITS THE FOLLOWING MODEL(S):

    1995-’99 Magnum 425
    2003-’04 Ranger 500
    1999-’00 Sportsman 335
    2001-’02 Sportsman 400
    1996-’97 Sportsman 500
    1999 Worker 335
    1997 Xplorer 500

    USED ON POLARIS PART NUMBER(S): 3084969 and 3086857 

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $289.95 $260.96
  • Magnum 425 Throttle Cable

    This new complete throttle cable assembly will install and work just like stock. Replaces Polaris part numbers 7080599.

    FITS THE FOLLOWING MODELS:

    1995-1998  Magnum 425


    Replaces Polaris Part Number(s): 7080599

    $19.95 $17.96

Main Menu