RS1 Parts and Accessories

  • Accessories

    Accessories (5)

  • Clutching

    Clutching (4)

  • Body

    Body (2)

  • Electrical

    Electrical (4)

  • Driveline

    Driveline (1)

  • Suspension

    Suspension (1)

  • Tools

    Tools (1)

  • Fuel/ Intake

    Fuel/ Intake (1)

  • ATV UTV 50″ 60″ 72″ Snow Plow Blade 16″ Marker Kit for Moose Utilities Plows – Same as M91-50040

    Add these corner markers to any Moose ATV/UTV snow plow blade to offer better visibility and safety. Flexible yet hard plastic is made to withstand severe cold weather without cracking or breaking. Integrated stamped steel mounting base. Simple to install, just drill one hole in each upper corner of the blade and bolt in place with the included hardware. 16″ tall. Sold as a set. The perfect replacement to the Moose M91-50040 plow markers.

    $24.95 $22.46
  • Polaris Primary Clutch Spider Tool

    New Polaris Primary Clutch Spider Tool. Our unique design uses 6 bolts to help hold the tool in place.  The 6 bolts are screwed in using the the clutch cover holes. Made with 1/4″ thick steel and uses a 3/4″ ratchet. This tool is used on Polaris ATV/UTV P-85 & P-90 clutches. (Was commonly used on mid 90’s to current models.)

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $49.95 $44.96
  • Polaris RZR Seat Heater Kit

    The Quad Logic Seat Heater Kit is the ideal accessory to add to your machine when riding or plowing in cold weather conditions. The easy to install seat heater pads fits under your seat back, base and connects to your existing battery.

    The contour shaped pad maximizes the heated surface and includes High and Low heat settings allowing you to find your correct comfort level.

    Made out of neoprene fabric, allowing water and moister to shed vs. soaking it up and all heating elements are evenly stitched to the pad vs. glued, ensuring proper heat distribution and providing a longer life

    Max temp of 125 degrees Fahrenheit / 51 degrees Celsius.

    Heat Pad dimensions:   Seat Back – 18″ x 10″      Seat Base – 17″ x 14″

    Please verify your seat size and that your seat cover will allow our kit to be inserted.

    Fits the following models:

    2012-’22  RZR 570
    2008-’14  RZR 800
    2011-’22  RZR 900
    2014-’22  RZR 1000
    2016-’22  RZR Turbo
    2018-’22  RZR RS1
    2014-’19  RZR Ace (all models)

    THIS KIT WILL NOT WORK WITH THE POLARIS RZR PRO XP MODELS.

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $99.95 $89.96
  • Polaris Seat Belt Harness Override Bypass Plug

    Seat belt override plug has been designed to close the open loop system and avoid limp mode, allowing you to bypass the factory governor (15 mph) when seat belts are not connected. This allows you use the full potential of your motor. No wiring skills required for this install, all you have to do is unplug the old seat belts and plug in the new override. Must be used when installing aftermarket four and five point harnesses. Works on all Polaris models that come standard with the seat belt safety feature.

    $8.95 $8.06
  • PRO ARMOR 8 Speaker Soundbar with Bluetooth

    Pro Armor® Bluetooth® Sound Bars. The 8 speaker sound bar is designed for easy installation to have you rocking or rolling in no time. These powered self-contained units feature midrange/midbass driver speakers two dedicated tweeters and integrated amplifiers. You can play music directly from your device using either the provided 3.5mm wired input or through the integrated Bluetooth® connection. Large buttons allow you to control the unit while on the go even with thick riding gloves. These work great as a stand-alone audio solution or you can make it part of a larger full-sound experience by adding audio pods and more. Durable extruded aluminum housing finished in black will provide years of trouble free sound.

         OVERVIEW & SPECS

    • Recessed Mounting System Wont Impede Sight Lines
    • Integrated 100 Watt Amplifier
    • Four High-Energy Midrange Drivers
    • Two Pure Titanium Dome Tweeters With Neodymium Magnets
    • 10 Meter Bluetooth® Range
    • 3.5mm Auxiliary Input Plug and 2 Volt Preamp Output Voltage
    • Oversized Rubber Buttons
    • Speaker Length 25.79″
    • Depth 2.32″
    • Hang Height 4.14
    • Bluetooth Range 10 Meter
    • Preamp Outputs to connect other audio components

     

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $299.95 $269.96
  • Roll Pin Punch Tool

    Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:

    Polaris ATV’s from 1993 to Current

    Polaris RZR UTV’s from 2008 to Current

    Polaris Ranger UTV’s from 2003 to Current

    $24.95 $22.46

    Roll Pin Punch Tool

    $24.95 $22.46
  • RS1 Primary Clutch Sheave Bushing

    New primary clutch moveable sheave bushing for many Polaris ATV’s and UTV’s. This bushing is constantly moving and so it wears out quickly, replace it before it does more damage to your clutch. Made of steel with a super smooth Teflon inner coating. Size is approximately 2.4″ OD x 1″ tall. Sold Each. Exact replacement for Polaris part number 3514891.

    FITS THE FOLLOWING MODEL(S):

    2018-’22 RZR RS1

    REPLACES POLARIS PART NUMBER(S): 3514891

    $24.95 $22.46
  • RS1 Secondary Clutch Bolt

    Brand new secondary clutch bolt for the Polaris RS1. Brand new high quality parts are exactly the same as the originals! This replaces Polaris part number 7520408.

    FITS THE FOLLOWING MODEL(S):

    2018 RZR RS1


    REPLACES POLARIS PART NUMBER(S): 7520408

    $9.95 $8.96
  • RZR Turbo Primary Clutch Sheave Bushing

    New primary clutch moveable sheave bushing for many Polaris ATV’s and UTV’s. This bushing is constantly moving and so it wears out quickly, replace it before it does more damage to your clutch. Made of steel with a super smooth Teflon inner coating. Size is approximately 1 3/4″ OD x 3/4″ tall. Sold Each. Exact replacement for Polaris part number 3514892.

    FITS THE FOLLOWING POLARIS MODELS:

    2018-’22 RZR RS1
    2019 RZR TURBO 4
    2020 RZR TURBO S
    2020 RZR TURBO S 4
    2016, -19, -20 RZR XP 4 TURBO
    2016-’20 RZR XP TURBO
    2018-’19 RZR XP TURBO S
    2017-’19 RZR XP4 TURBO

    Replaces Polaris part number: 3514892.

    $18.95 $17.06
  • Universal Polaris EFI Fuel Sending Unit Float

    Fuel gauge quit working? Save the costly repair bill and try this replacement float from Quad Logic! Many times a faulty fuel gauge is caused by a leaky float and we’re here to help. Polaris and Can-Am do not sell these individually. We do not have a way to get and exact list of what these fit so please look closely and the pictures and compare the size to what is currently used on your machine. This quality float is approximately 1 1/2″ Tall and 1 1/4″ Diameter with an 1/8″ Hole in the middle. This float also includes the retainer clip to keep float securely mounted on the sending unit rod. Be sure to check out all of Quad Logic’s other options for complete sending units and other fuel system parts! This Universal fuel system float fits many powersport applications including the models listed below and many more!

    Ranger, RZR, Sportsman, Scrambler, Outlander Renegade, Maverick, Commander, Defender

    Exact Dimensions (1.45″ Tall 1.26″ DIA .100″ Center Hole)

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $12.95 $11.66
  • Universal UTV Cigarette Lighter Kit

    No longer is wind an issue with this blast from the past universal UTV cigarette lighter kit!! Our lighter kit can be installed into an existing 1.10″ (28mm) or .875″ (22.25mm) hole in your dash or you can drill out a hole in a new location.  Once installed, just push, pop and enjoy!

    KIT INCLUDES:

    (1) Lighter Plug w/ Handle
    (1) Lighter socket
    (1) Trim Ring
    (1) Wire Harness
    (1) Install Instructions

     

    $19.95 $17.96

Main Menu