ATV
-
K&N Oil Filter – Gas Gas, Honda, Kawasaki, Polaris, Suzuki (see details for fitment)
K&N Oil Filter – 1985-2009 Honda, 2010-14 Kawasaki KFX450R, 2006-07 Polaris Outlaw 500
$5.89$2.95 -
-
$22.00$19.80Offset Key, 1.5 degree – 2001-19 Polaris Twins
$22.00$19.80 -
$22.00$19.80Offset Key, 2.5 degree – 2001-19 Polaris Twins
$22.00$19.80 -
Plug and Play UTV Signal Kit – Polaris Ranger and Crew (Mid Size)
Plug & Play UTV Signal Kit – Polaris Ranger & Crew (Mid Size)
$277.98$138.99 -
-
-
Renegade Billet Thermostat Housing
Replace your OEM thermostat housing with this billet aluminum Quad Logic version. When you get them from the factory you can’t change the thermostat without changing the whole housing. With our product you can easily remove or replace your thermostat if it ever goes out. Great product for people who want to run a cooler temp thermostat, thermostat delete or just like being able to change your thermostat out if it ever goes bad. Easily installs right where the factory thermostat housing does. All hardware is included. Replaces Can-Am part number 709200406. Fits the following models:
2012-2015 Can-Am Renegade 1000
2016-2019 Can-Am Renegade 1000 R
2017-2019 Can-Am Renegade 570
2016-2019 Can-Am Renegade 850Replaces Can-Am part number 709200406.
$119.95$107.96Renegade Billet Thermostat Housing
$119.95$107.96 -
Roll Pin Punch Tool
Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:
Polaris ATV’s from 1993 to Current
Polaris RZR UTV’s from 2008 to Current
Polaris Ranger UTV’s from 2003 to Current
$24.95$22.46Roll Pin Punch Tool
$24.95$22.46 -
Scrambler 1000 Bottom End Crankshaft Assembly
New replacement bottom end crankshaft assembly for your Polaris Scrambler 1000! Exact replacement and ready to be dropped into your engine. Does NOT included main bearing or seals. Replaces Polaris Number(s): 2205143.
FITS THE FOLLOWING MODELS:
2015-’22 SCRAMBLER 1000 2014-’22 SCRAMBLER XP 1000 REPLACES POLARIS PART NUMBER(S): 2205143
$999.95$899.96Scrambler 1000 Bottom End Crankshaft Assembly
$999.95$899.96 -
Scrambler 850 /1000 Billet Aluminum Oil Level Dipstick and O-Ring
New replacement BILLET ALUMINUM Oil Level Dipstick for your Sportsman or Scrambler 850/1000. Exact replacement and includes the sealing O-ring. Replaces Polaris 2521028 and 5412530.
FITS THE FOLLOWING MODEL(S):
2014-’23 SCRAMBLER XP 1000 2013-’23 SCRAMBLER 850 REPLACES POLARIS PART NUMBER(S): 2521028 and 5412530.
$34.95$31.46 -
Scrambler 850 1000 Winch Mount Kit
Heavy gauge steel Winch Mount Kit specific for your Polaris models. Kit provides the hardware necessary to mount a winch to your Polaris and are designed to fit Cycle Country, Kolpin & other branded aftermarket winches.
This winch bracket is a direct bolt on for the following models.2013-22 Scrambler 8502014-20 Scrambler 1000 (Does not fit 55″ S Model)– Winch mount kit includes all hardware necessary to mount a winch to your vehicle-Designed to fit Kolpin, Cycle Country and most available winches with common bolt patterns-Made with Heavy gauge steel-Powder coat paint protectionWe make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$79.95$71.96Scrambler 850 1000 Winch Mount Kit
$79.95$71.96 -
Scrambler 850 Bottom End Crankshaft Assembly
New replacement bottom end crankshaft assembly for your Polaris Scrambler 850! Exact replacement and ready to be dropped into your engine. Does NOT included main bearing or seals. Replaces Polaris Number(s): 2204233.
FITS THE FOLLOWING MODELS:
2013-’22 Scrambler 850 REPLACES POLARIS PART NUMBER(S): 2204233
$899.95$809.96Scrambler 850 Bottom End Crankshaft Assembly
$899.95$809.96 -
Scrambler 850/1000 Quick Release Dzus Fastener Side Panel Hardware Kit
It’s very frustrating that Polaris has stooped to using those cheap plastic rivets to attach body panels on their ATV’s. Not only do they break or loosen up over time but you need a special pliers to remove them. The Scrambler 850/1000 side panels are held on with these plastic rivets, what are you to do if you have an engine issue out on the trail and you don’t have tools to remove them? Who wants to grab special pliers to remove the side panels every time you wash it?
We are problem solvers here at Quad Logic and like to make your life easier. We developed this super trick Dzus fastener kit to easily remove your side panels without tools! They are also much stronger and will not break like the plastic rivets. After some simple installation, all it takes is a quarter turn of the fasteners and the side panel can be removed or installed. Don’t worry about dropping or losing any hardware either, it all stays attached to the side panels!
This kit includes everything you need to install it on both side panels including instructions. Definitely recommended for all Scrambler 850/1000 owners!FITS THE FOLLOWING MODELS:
2013-’22 Scrambler 850
2014-’22 Scrambler 1000$39.95$35.96 -
Scrambler XP Ball Joint Install & Removal Tool
Replacing the ball joints from the a-arms on most Polaris machines can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel tool set is designed to both remove and install the ball joint using any standard shop press without damaging the a-arm or ball joint.
The kit starts with our holder tool. This uniquely sized tube is welded to a nice baseplate for a secure footprint. The holder tool fits perfectly in the groove of the a-arm around the balljoint. Simply set the a-arm in place over the holder tool and press the old ball joint out. It will drop out of the a-arm and into the holder tool.
To install the new balljoints simply flip the a-arm over on the holding tool, put the new balljoint in place, use the install tool on top of the balljoint, and press into place. The install tool pushes against the edge of the balljoint so you do not dimple or damage the center. Very simple and no damage to paint or powdercoat.
Both tools are zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
2013-21 Scrambler 850
2014-19 Scrambler 1000Works with Polaris Part Number: 7061220, 7061187, 7081505, 7081580, and 7081666
$39.95$35.96Scrambler XP Ball Joint Install & Removal Tool
$39.95$35.96