ATV
-
Trailblazer 250 Clutch Outlet Tube Rubber Boot
Brand new clutch air outlet boot. Replace that old dried out cracked one with this new one. This boot fits between the clutch cover outlet and plastic tube (near your left leg). Replaces Polaris part number # 5411489.
FITS THE FOLLOWING MODELS(S):
2002-05 Trail Blazer 330 2002-05 Trail Boss 330 1998-99 Big Boss 500 1999 Worker 335 1999-01 Worker 500 2002 Xplorer 400 2004-05 ATP 330 2004-05 ATP 500 REPLACES POLARIS PART NUMBER(S): 5411489
$11.95$10.76Trailblazer 250 Clutch Outlet Tube Rubber Boot
$11.95$10.76 -
Trailblazer Engine Mounting Nuts (6 PACK)
Brand new replacement engine mounting nuts for Polaris ATV models. These brand new flange hex flange nuts are brand new replacements for Polaris part number 7547108. These identical replacements are zinc coated for a durable finish and even include the factory applied thread locker on inside of the threads. We sell these nuts in a 6 pack. With many applications and other uses across all the Polaris machines be sure to check with the Polaris parts diagrams. The applications listed below show what machines use these nuts for engine mounting.
(Sold as a 6 PACK)
Check out Quad Logic for all your replacement Polaris hardware needs.
Fits the following models:
2001 Worker 500
1999-01 Xplorer 400
2000-02 Xpedition 325
2000-02 Xpedition 425
2003-13 Trail Boss 330
2008-13 Trail Blazer 330
Replaces Polaris Part Number: 7547108
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$7.95$7.16Trailblazer Engine Mounting Nuts (6 PACK)
$7.95$7.16 -
Trailblazer Exhaust Gasket Donut Seal
This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite. It is designed to perform even better than the stock Polaris gasket. Exact replacement for your Polaris. Most Trailboss and Trailblazers use TWO gaskets total: one between the short head pipe and main pipe and another between the main pipe and the muffler. Be sure to order 2 if replacing both. Sold each. Replaces Polaris 5243517. Fits the following Polaris ATV models:
2008-13 Trail Blazer 330
2000-02 Trail Boss
2003-13 Trail Boss 330
2000-02 Xpedition 325/425
Replaces Polaris 5243517.
$9.99$8.99Trailblazer Exhaust Gasket Donut Seal
$9.99$8.99 -
Trailblazer Gates G-Force Workhorse Drive Belt
Quad Logic is now a Gates distributor for all your Polaris ATV and UTV belt needs! These belts are tried and true, torture tested for years. We trust them on all our machines and so should you. They are a much better value than the OEM Polaris belts but probably exceed the performance at the same time. This G-Series Workhorse belt is a perfect replacement and /or performance belt for your machine. The top cogs offer better cooling and the aramid cords make it extremely strong. The Gates G-Force Workhorse 20G4022 has increased strength and reliability. Replaces Polaris part number 3211077.
- Up to 2x the life of the G-Force Belt.
- 45% increased heat tolerance.
- Power for hauling heavy loads across aggressive terrain
- Improved durability, crack & wear-resistance.
FITS THE FOLLOWING MODEL(S):
1992-’13 Trailblazer 250/330/400’sREPLACES POLARIS PART NUMBER(S) 3211077 and 3211048
$84.95$76.46Trailblazer Gates G-Force Workhorse Drive Belt
$84.95$76.46 -
Trailblazer Primary Clutch Bolt and Washers
Brand new primary clutch bolt and washers for many single cylinder Polaris ATV and UTV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5210748, 7512566, and 7575202. Includes one clutch bolt, one thick flat washer, and one star type washer. Fits the following models and more:
1990-2006 Trailblazer 250
2008-13 Trailblazer 330
Replaces Polaris Part Number: 5210748, 7512566, and 7575202
$8.95$8.06Trailblazer Primary Clutch Bolt and Washers
$8.95$8.06 -
Trailblazer Primary Clutch Puller
Brand new primary clutch puller for almost all 1985 and newer Polaris ATV’s and UTV’s using the P85 primary clutch. Hardened steel puller is plated for corrosion resistance. 10.25″ overall length and 3/4″-16 threads. Be sure to use a dab of grease on the end of the puller and threads to properly pull the clutch. Same as Polaris part number 2870506.
Fits all 1990-2013 Trailblazer 250/330/400 models
Same as Polaris part number 2870506.
$24.95$22.46Trailblazer Primary Clutch Puller
$24.95$22.46 -
Trailblazer Secondary Clutch Puller
The secondary clutch is supposed to slide right off the shaft. However, if neglected, the clutch will be rusted onto the shaft and you simply cannot get it off without this puller. Hardened steel puller is plated for corrosion resistance. 5.5″ overall length. Same as Polaris part number 2870913.
Fits all 1990-2013 Trailblazer 250/330/400 modelsSame as Polaris part number 2870913.
$24.95$22.46Trailblazer Secondary Clutch Puller
$24.95$22.46 -
Trailblazer/Trailboss 250 Top End Gasket Kit
Kit includes head, base, and exhaust gasket to rebuild the top end of your Polaris 250. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following top end gaskets shown in the photo including:
Head Gasket
Base Gasket
Exhaust GasketThis gasket kit fits the following models:
1990-2006 Trailblazer 250
1989-92 Trailboss 250
1989-92 Big Boss 250
2000-02 Xplorer 250
$24.95$22.46Trailblazer/Trailboss 250 Top End Gasket Kit
$24.95$22.46 -
Ultraweld Clear Epoxy, 1oz (2 pack)
Ultraweld Clear Epoxy, 1oz
$3.85$1.93Ultraweld Clear Epoxy, 1oz (2 pack)
$3.85$1.93 -
Winch Mount Kit – 2005-10 Polaris ATV
Winch Mount Kit – Polaris ATV
$29.49$58.98Winch Mount Kit – 2005-10 Polaris ATV
$29.49$58.98