ATV
-
-
Trail Blazer 250 (1990-2006) Carburetor Intake Adapter Boot
Brand new intake manifold for the Polaris Trail Blazer 250 motors. A cracked or leaking intake manifold will cause a lean condition and engine damage if not corrected. Get it back running like new again with this new direct replacement intake boot by Quad Logic.
FITS THE FOLLOWING MODEL(S):1990-’06 TRAIL BLAZER 250 1993 250 1994-’95 300 1989-’92 BIG BOSS 250 1985-’86 SCRAMBLER 250 1996-’97 SPORT 400L 1985-’99 TRAIL BOSS 250 1996-’02 XPLORER 300 1996-’99 XPRESS 300 1996-’97 XPRESS 400 USED ON CAN-AM PART NUMBER(S): 3085013 and 3083412
$17.95$16.16 -
Trail Blazer 250/400 Voltage Regulator
Charging or lighting issues can many times be caused by a bad voltage regulator. Replace it with this exact replacement unit from Quad Logic. Replaces Polaris part number 4060208. This 3 wire regulator fits the 1999-03 Trailblazer 250 and 2003 Trailblazer 400.
Replaces Polaris Part Number: 4060208
$34.95$31.46Trail Blazer 250/400 Voltage Regulator
$34.95$31.46 -
Trail Blazer Air Box Foam Collar
Quad Logic offers these quality foam replacement air box collars. The old foam parts are known to deteriorate over the years of use and we are here to help with our full line of replacement Polaris parts. These foam parts are a direct replacement for Polaris part number 5811102 and fit most Polaris Scrambler, Sport, and Trailblazers from 1995-02. Save over the high priced dealership prices with replacements from Quad Logic. Check out our full line up of products on our eBay store.
Fits the following models;
1995-02 Scrambler 400
1996-99 Sport 400
1996-99 Trailblazer
2000 Xplorer
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$14.95$13.46Trail Blazer Air Box Foam Collar
$14.95$13.46 -
Trail Blazer Taillight Lens
Replace your broken rear taillight lens with this exact replacement. Fits and works just the like expensive factory lens. Replaces Polaris part number 4032085. Fits the following Polaris models:
1996-06 Trailblazer 250
2008-09 Trailblazer 330
2003 Trailblazer 400
1996-99 Sport 400
REPLACES POLARIS PART NUMBER(S): 4032085Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$10.95$9.86Trail Blazer Taillight Lens
$10.95$9.86 -
Trailblazer 2 stroke Flywheel
Complete new replacement flywheel for your Polaris 2 Stroke ATV. The stock flywheels are prone to failure, especially the magnets coming loose or breaking. Fix it for good with our aftermarket flywheel that is a big improvement over the stock unit. It starts with using a higher temp epoxy that eliminates magnet detachment. High strength steel capping prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator. Lastly, these stators are precision balanced to reduce vibration and add longevity to your engine. Installation is just like stock. Replaces Polaris part numbers: 3084760, and 3084784.
Fits all the following Polaris models:
2003 Trail Blazer 400
1994-97 Big Boss 400
1996-97 Xpress 300
1996-97 Xpress 400
1995-02 Xplorer 400
1994-99 Sport 400
1995-02 Scrambler 400
1994-97 Sportsman 400
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$174.95$157.46Trailblazer 2 stroke Flywheel
$174.95$157.46 -
Trailblazer 250 Clutch Outlet Tube Rubber Boot
Brand new clutch air outlet boot. Replace that old dried out cracked one with this new one. This boot fits between the clutch cover outlet and plastic tube (near your left leg). Replaces Polaris part number # 5411489.
FITS THE FOLLOWING MODELS(S):
2002-05 Trail Blazer 330 2002-05 Trail Boss 330 1998-99 Big Boss 500 1999 Worker 335 1999-01 Worker 500 2002 Xplorer 400 2004-05 ATP 330 2004-05 ATP 500 REPLACES POLARIS PART NUMBER(S): 5411489
$11.95$10.76Trailblazer 250 Clutch Outlet Tube Rubber Boot
$11.95$10.76 -
Trailblazer 400 (1994-03) Magneto Stator
Complete replacement stator for your Polaris Trail Blazer, Scrambler, and Sport. This is an excellent quality RM stator brand replacement unit. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part #3084785 and 3084788. Fits all the following Polaris models:
1996-97 and 03 Trail Blazer 400
1995-02 Scrambler 400
1996-99 and 94 Sport 400
Replaces Polaris part #3084785 and 3084788.
$199.95$179.96Trailblazer 400 (1994-03) Magneto Stator
$199.95$179.96 -
Trailblazer 400 Full Engine Gasket Set
Full engine gasket and seal kit to completely rebuild the engine of your Polaris ATV 400 two stroke. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following gaskets shown in the photo including:
- Head Gasket (Replaces Polaris # 3084731)
- Base Gasket (Replaces Polaris # 3084729)
- Reed Valve Gasket (Replaces Polaris # 3084148)
- Exhaust Gasket (Replaces Polaris #3084439, 3086757)
- Case Gasket
- Starter Gasket
- Oil Pump Cover Gasket
- Crank Seals
- Other misc seals and gaskets shown
This gasket kit fits the following models:
2003 Trail Blazer 400
$29.95$26.96Trailblazer 400 Full Engine Gasket Set
$29.95$26.96 -
Trailblazer 400 Top End Gasket Set
Kit includes head gasket, base gasket, reed valve gasket and exhaust gasket to rebuild the top end of your Polaris ATV 400 two stroke. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following top end gaskets shown in the photo including:
- Head Gasket (Replaces Polaris # 3084731)
- Base Gasket (Replaces Polaris # 3084729)
- Reed Valve Gasket (Replaces Polaris # 3084148)
- Exhaust Gasket (Replaces Polaris #3084439, 3086757)
This gasket kit fits the following models:
1994-95 400L
1994-97 400L Big Boss
1995-02 Scrambler 400
1994-99 Sport 400
1994-97 Sportsman 400L
1996-97 Xpress 400
1995-02 Xplorer 400
2003 Trail Blazer 400
$24.95$22.46Trailblazer 400 Top End Gasket Set
$24.95$22.46 -
Trailblazer Carburetor Needle & Seat
New replacement 2.5 needle and seat for your Polaris ATV carburetor. Includes a new viton tipped needle and brass seat. Installs just like stock to get your fuel flowing properly again. Replaces Polaris part number 3130360. Fits the following Polaris two stroke ATV’s and more:
1990-01 Trailblazer1985-99 Trail Boss1993-95 250/300/350L models1996-97 Sport 4001996-01 Xplorer 250/3001996-99 Xpress 300/4001993-95 250/300/350L modelsReplaces Polaris part number 3130360
$19.95$17.96Trailblazer Carburetor Needle & Seat
$19.95$17.96 -
Trailblazer Carburetor Needle and Seat
New replacement needle and seat for your Polaris ATV carburetor. Includes a new needle, seat, and rubber sealing o-ring. Installs just like stock to get your fuel flowing properly again. Replaces Polaris part number 3130495. Fits the following Polaris two stroke ATV’s:
1994-97 400L1995-01 Scrambler 4001994-99 Sport 4001996-97 Trailblazer 2501995-01 Xplorer 4001996-97 Xpress 300/400Replaces Polaris 3130495.
$23.95$21.56Trailblazer Carburetor Needle and Seat
$23.95$21.56 -
Trailblazer Clutch Cover Gasket and Screw Kit
Replace your leaking clutch cover gasket with this quality replacement gasket from Quad Logic. To make your installation easy we took the time to group these gaskets with new screws into a complete kit! This kit includes 1 Clutch Cover Gasket, 7 Screws
This kit replaces Polaris part numbers:
Clutch Cover Gasket, 5521148, 5521160, 5521301, 5525160, 5521578, 5521738
Screws, 7512094, 7512093, 7512095, 7512093
This kit works with the following models;
1999 Worker 335
1999-01 Worker 500
2000-02 Xplorer 250
1996-99 Xplorer 300
1996-02 Xplorer 400
1997 Xplorer 500
1996-99 Xpress 300
1996-97 Xpress 400
2003 Trail Blazer 400
1996-02 Trail Boss 250
2001-02 Trail Boss 325
1997-02 Trail Blazer 250
REPLACES POLARIS PART NUMBER(S): 5521148, 5521160, 5521301, 5525160, 5521578, 5521738, 7512094, 7512093, 7512095, 7512093
$22.95$20.66Trailblazer Clutch Cover Gasket and Screw Kit
$22.95$20.66 -
Trailblazer Engine Mounting Nuts (6 PACK)
Brand new replacement engine mounting nuts for Polaris ATV models. These brand new flange hex flange nuts are brand new replacements for Polaris part number 7547108. These identical replacements are zinc coated for a durable finish and even include the factory applied thread locker on inside of the threads. We sell these nuts in a 6 pack. With many applications and other uses across all the Polaris machines be sure to check with the Polaris parts diagrams. The applications listed below show what machines use these nuts for engine mounting.
(Sold as a 6 PACK)
Check out Quad Logic for all your replacement Polaris hardware needs.
Fits the following models:
2001 Worker 500
1999-01 Xplorer 400
2000-02 Xpedition 325
2000-02 Xpedition 425
2003-13 Trail Boss 330
2008-13 Trail Blazer 330
Replaces Polaris Part Number: 7547108
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$7.95$7.16Trailblazer Engine Mounting Nuts (6 PACK)
$7.95$7.16 -
Trailblazer Exhaust Gasket Donut Seal
This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite. It is designed to perform even better than the stock Polaris gasket. Exact replacement for the 1995-02 Scrambler 400, 1996-99 Sport 400, and the 2003 Trail Blazer 400. The Scrambler/Sport 400 uses TWO of these gaskets total: one one each side of the short headpipe. Be sure to order 2 if replacing both. Sold each. Replaces Polaris 5211592.
Replaces Polaris Part # 5211592.
$9.99$8.99Trailblazer Exhaust Gasket Donut Seal
$9.99$8.99 -
Trailblazer Gates G-Force Workhorse Drive Belt
Quad Logic is now a Gates distributor for all your Polaris ATV and UTV belt needs! These belts are tried and true, torture tested for years. We trust them on all our machines and so should you. They are a much better value than the OEM Polaris belts but probably exceed the performance at the same time. This G-Series Workhorse belt is a perfect replacement and /or performance belt for your machine. The top cogs offer better cooling and the aramid cords make it extremely strong. The Gates G-Force Workhorse 20G4022 has increased strength and reliability. Replaces Polaris part number 3211077.
- Up to 2x the life of the G-Force Belt.
- 45% increased heat tolerance.
- Power for hauling heavy loads across aggressive terrain
- Improved durability, crack & wear-resistance.
FITS THE FOLLOWING MODEL(S):
1992-’13 Trailblazer 250/330/400’sREPLACES POLARIS PART NUMBER(S) 3211077 and 3211048
$84.95$76.46Trailblazer Gates G-Force Workhorse Drive Belt
$84.95$76.46