ATV

  • Sportsman 500 Primary Clutch Weight Bolt and Nut Kit

    Brand new primary clutch weight shoulder bolt and nut kit for many older Polaris ATV’s.  Brand new high quality parts are exactly the same as the originals!  These replace Polaris part numbers 7512266 and 7541906.  Includes three bolt’s and three nut’s.  Fits the following models and more:

    1994-98 Sport 400L

    1993-96 Sportsman

    1999-00 Sportsman 335

    1997 Sportsman 400L

    2001-05 Sportsman 400

    2006 Sportsman 450

    1996-07 Sportsman 500

    Replaces Polaris Part Number: 7512266 and 7541906

    $19.95 $17.96
  • Sportsman 500 Radiator Fan Thermal Sensor Switch

    Buy with confidence as this sensor plugs right in and has the exact same temp settings as stock. This sensor controls the fan operation so if your fan wont turn on or off, this could be the problem. Replaces Polaris part number 4010808. This unit is located on the radiator and controls the hot temp light and cooling fan operation. This is a TWO wire unit. Fit the following Polaris models:

    2009-13 Sportsman 500 HO

    2011-14 Sportsman 400 HO

    2006-07 Outlaw 500

    2003-06 Predator 500

    2011-14 Hawkeye 400

    Replaces Polaris part number 4010161 and 4010808.

    $24.95 $22.46
  • Sportsman 500 Radiator Fan Thermal Switch Sensor

    Buy with confidence as this sensor screws directly into the radiator and has the same 185 degree opening temp setting as stock. Replaces Polaris part number 4010202, 4110225, and 4010256 for all 1997-99 Sportsman 500′s. This unit is located on the top of the radiator in the center and controls the cooling fan operation.

    1997 Sportsman 400L

    1997-99 Sportsman 500

    Replaces Polaris Part Numbers: 4010202, 4110225, and 4010256

    $29.95 $26.96
  • Sportsman 500 REAR Brake Caliper Seal O-ring Kit

    This seal kit allows you to rebuild that sticking or worn out rear brake caliper.  Includes all the seals pictured. Sold per caliper. Replaces Polaris part numbers 5410766, 5410767, 5410542, and 5411432.  Fits the REAR transmission mounted caliper on the following Polaris Sportsman ATV’s and more:
    1996-97 Sportsman 500
    1994-95 Polaris 300 2×4 and 4×4
    1994-97 Polaris 400L 2×4, 4×4, and 6×6
    1998-99 Big Boss 500 6×6

    This kit will fit Polaris rear caliper part number 5410766, 5410767, 5410542, and 5411432.

    $19.95 $17.96
  • Sportsman 500 Rear Brake Master Cylinder Rebuild Kit

    Brand new rear foot brake master cylinder rebuild kit for your Sportsman. If your foot brake quit working, don’t replace it, rebuild it! This all inclusive kit includes everything you need to get it working properly again. Includes the new piston/shaft, three cupped seals, washer and return spring. Fits Polaris rear master cylinder part numbers 1910790, 1910301, and 1911113. Second picture is for reference, this is a rebuild kit only. Fits the following models:

    1999-01 Diesel
    1999-00 Sportsman 335
    2001-05 Sportsman 400
    2006-07 Sportsman 450
    1998-09 Sportsman 500

    Replaces Polaris Part Numbers: 1910790, 1910301, and 1911113

    $19.95 $17.96
  • Sportsman 500 Recoil Spring

    If your recoil spring broke or exploded out of the housing, this is an excellent replacement. Simply drop into place then release the wire to install! Sold each. Replaces Polaris 3083185 and 3021648. Replacement for all following Polaris ATV’s:

    2008-10 Sportsman 300
    1999-00 Sportsman 335
    1994-97 Sportsman 400L
    2001-08 Sportsman 400
    2006-07 Sportsman 450
    1996-08 Sportsman 500

    $14.95 $13.46
  • Sportsman 500 Rocker Cover Head Cover Gasket

    Got oil leaking from the rocker cover? Replace it with this rocker cover gasket from Quad Logic. Any time you remove the rocker (head) cover make sure to install a new gasket! 

    Sold each.  

    Replaces Polaris 3085074.  

    Replacement for all following models:
    2001-05 Sportsman 400
    2008-14 Sportsman 400 HO
    2006-07 Sportsman 450
    1996-13 Sportsman 500

    $14.95 $13.46
  • Sportsman 500 STEEL Front Rack

    Calling all 1996-03 Sportsman owners! Following our extremely popular steel floorboards are these brand new steel front racks! Forget about broken racks for good! These steel racks have a tubular substructure with a sheet metal top layer to mimic the look of the factory racks. These racks look so good most people wont notice they are aftermarket. We kept the look and integrity of the machine while giving it a huge upgrade in strength. Those of you who load up your racks or ride their machine off road a lot know, the plastic racks do not hold up!

    These racks are finished in a beautiful black texture powdercoat for a long lasting finish. It is a very grippy finish that helps keep your gear from sliding around like on the factory racks. There are as many or more tie down points for straps as well. Installation in a snap, it uses the same four mounting bots as stock.

    Plastic does not belong on an ATV! The fit and finish are excellent, these look like they are factory equipment, the way your Sportsman should have been. Fits just like stock, you can re-use all the original hardware. These racks will NOT accept rack extensions or other accessories without modification. This is for the FRONT only. Replaces Polaris part numbers 2670180 and 2670180-070.

    Fits the following models and more:

    1999-00 Sportsman 335

    2001-03 Sportsman 400

    1996-03 Sportsman 500

    $179.95 $161.96
  • Sportsman 500 STEEL Rear Rack

    Replace that broken rear rack with these STEEL rear racks from Quad Logic. Forget about broken racks for good! These steel racks have a tubular substructure with a sheet metal top layer to mimic the look of the factory racks. Our racks look like factory equipment but can actually handle heavy loads and cold temperatures without a problem.

    These racks are finished in a beautiful black texture powdercoat for a long lasting finish. It is a very grippy finish that helps keep your gear from sliding around like on the factory racks. There are as many or more tie down points for straps as well. Installation in a snap and the mounting hardware is included.

    Plastic does not belong on an ATV! The fit and finish are excellent, these look like they are factory equipment, the way your ATV should have been. These racks will NOT accept rack extensions or other accessories without modification. This is for the REAR only. Replaces Polaris part numbers 2670174, 2632837-070 and 2670174-070.

    Fits the following models and more (Does not fit 2004-1/2 models):

    1999-00 Sportsman 335
    2001-04 Sportsman 400
    1996-04 Sportsman 500

    Replaces Polaris Part Numbers: 2670174, 2670174-070, 2632836-070, 2632837-070, 2632637-070 and 2632667-070

    $179.95 $161.96
  • Sportsman 500 Storage Box Latch Left

    Replacement quarter turn latch with detent for the Sportsman front storage rack. This perfect replacement includes the glass filled nylon thumb latch with LH steel hook. Also included a new steel mounting nut and rubber washer. This latch fits the LEFT side only (when sitting on the machine). Replaces Polaris part number 7081241, 7081421, and 7081145. Fits the following Polaris models:

    2008-11 Hawkeye
    2006 Magnum 330
    2008-10 Sportsman 300
    2005 and 2008-10 Sportsman 400
    2006-07 Sportsman 450
    2005-10 Sportsman 500 (All, including X2, Touring, 6×6)

    Replaces Polaris Part Numbers: 7081241, 7081421, and 7081145

    $11.95 $10.76
  • Sportsman 500 Trombetta Starter Solenoid

    New genuine Trombetta replacement starter solenoid for most 2005-06 Polaris models. Don’t trust the cheap replica solenoids that will not last! Mounts and works just like the OEM unit. Replaces Polaris part number 4011072 and 4011251. Fits the following models:

    2005 ATP 330/500

    2005 Sportsman 400

    2006 Sportsman 450

    2005-06 Sportsman 500

    Replaces Polaris part # 4011072 and 401251

    $29.95 $26.96
  • Sportsman Ignition Keyswitch Repair Harness Pigtail

    The connectors to the Polaris ATV ignition switches are prone to corroding and preventing the switch from working. Even the tab is brittle so they can easily break off and need to be replaced. Don’t buy the whole wire harness from Polaris!! We have this easy pigtail kit to splice in the new connector. This direct replacement plug fits a huge number of 2002 and newer Polaris ATV models and will get your ignition switch working again. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail. Our pigtail fits perfectly to the ignition switch and has a nice wire sheathing protecting the wires going into the plug. The wires are 6″ long so it can be fixed inside the headlight pod. Sold Each. Includes butt connectors and zip ties. Fits all 6 pin ignition switches such as Polaris part number 4010390, 4011002, 4012165, 4012166. Fits the models listed below and more:

    2008-10 Sportsman 300
    2002-14 Sportsman 400
    2006-18 Sportsman 450
    2002-13 Sportsman 500
    2009-14 Sportsman 550
    2014-18 Sportsman 570
    2003-05 Sportsman 600
    2002-07 Sportsman 700
    2005-14 Sportsman 800
    2009-17 Sportsman 850

    2010-19 Sportsman 850 Touring
    2015-17 Sportsman 1000

    2015-18 Sportsman 1000 Touring
    2015 Sportsman ETX

    Works with Polaris Part Number: 4010390, 4011002, 4012165, 4012166

    $24.95 $22.46
  • Sportsman REAR Brake Caliper Piston

    Replace that corroded caliper piston with this brand new unit from the original brake manufacturer.  This is NOT a reproduction piston.  Long lasting anodized finish. This piston will fit rear caliper part numbers 1910690, 1911075, 1910806.

    FITS THE FOLLOWING MODEL(S): 

     
    2003-05 Sportsman 400
    2006-07 Sportsman 450
    2003-09 Sportsman 500
    2003-05 Sportsman 600
    2002-07 Sportsman 700
    2005-09 Sportsman 800
    2008-13 Sportsman 800 6×6

    This kit will fit Polaris rear caliper part number 1910690, 1911075, 1910806.

    $29.95 $26.96
  • Sportsman Tie Rod End To Spindle Washers (4 PACK)

    Brand new washers for your Polaris Sportsman. These washers are specifically used on the outer tie rod ends of models Polaris Sportsman models. These yellow zinc washers are an exact replacement for Polaris Part number 7556099. 2 washers are used each side of machine, 1 on top of spindle and 1 on the bottom as shown in pictures above. these are sold as a 4 pack so you can replace both sides of the machine.

    This listing is for 4 washers only. No other hardware is included in the listing. Please check out Quad Logic for all your Polaris hardware needs.

    Fits the following models and many more

    2000 Sportsman 335

    2000-19 Sportsman 500

    2001-14 Sportsman 400

    2002-07 Sportsman 700

    2006-14 Sportsman 800

    2014-22 Sportsman 570

    2016-22 Sportsman 450

    2020-22 Sportsman 850

    2020-22 Sportsman 1000

    REPLACES POLARIS PART NUMBER(S): 7556099

    $6.95 $6.26

Main Menu