ATV
-
Trail Blazer 250 Magneto Stator
Complete replacement stator for your Polaris ATV. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part # 3083979. Fits following models listed below.
1990-2006 Trail Blazer 250
Replaces Polaris Part Number: 3083979
$199.95$179.96Trail Blazer 250 Magneto Stator
$199.95$179.96 -
Trailblazer 250 Primary Clutch Rebuild Kit
This is a rebuild kit for the spider and sheave on many Polaris ATV primary clutches. Includes everything shown in the picture such as the pins, narrow style rollers, shims, buttons, clutch cover bushing and movable sheave bushing. What is NOT included is the spring, weights, and any other components not shown. Allows you to completely rebuild your worn out spider with a very cost effective kit. Exact replacement parts for Polaris part numbers 3576504, 1321457, 5430945, 5020422, 3576510 and 5431936.
Fits all 1990-2006 Trailblazer 250 and 2008-13 Trailblazer 330 models.
$89.95$80.96Trailblazer 250 Primary Clutch Rebuild Kit
$89.95$80.96 -
Trailblazer 250 Rear Brake Pads
OEM quality pads but at an incredible value. Our new semi metallic REAR brake pads for the Polaris ATV’s are the best of both worlds. They are designed to offer the best compromise between stopping power and pad life. These pads offer great braking feel with a higher coefficient of friction. These are the perfect pads for hard riding in all conditions. Sold as a pair for one caliper.
Fit the following:
1990-’98 TRAIL BLAZER 250 $14.95$13.46Trailblazer 250 Rear Brake Pads
$14.95$13.46 -
Trailblazer Carburetor Needle & Seat
New replacement 2.5 needle and seat for your Polaris ATV carburetor. Includes a new viton tipped needle and brass seat. Installs just like stock to get your fuel flowing properly again. Replaces Polaris part number 3130360. Fits the following Polaris two stroke ATV’s and more:
1990-01 Trailblazer1985-99 Trail Boss1993-95 250/300/350L models1996-97 Sport 4001996-01 Xplorer 250/3001996-99 Xpress 300/4001993-95 250/300/350L modelsReplaces Polaris part number 3130360
$19.95$17.96Trailblazer Carburetor Needle & Seat
$19.95$17.96 -
Trailblazer Clutch Intake/Outlet Tube Rubber Boot
Brand new clutch air intake boot. Replace that old dried out cracked one with this new one. Depending upon the year this boot fits between the front of the engine/clutch inlet to the vertical plastic clutch inlet tube and/or the clutch cover outlet tube. Replaces Polaris part number # 5410421.
Fits the 1990-03 Trailblazer 250’s.
$14.95$13.46Trailblazer Clutch Intake/Outlet Tube Rubber Boot
$14.95$13.46 -
Trailblazer Gates G-Force Workhorse Drive Belt
Quad Logic is now a Gates distributor for all your Polaris ATV and UTV belt needs! These belts are tried and true, torture tested for years. We trust them on all our machines and so should you. They are a much better value than the OEM Polaris belts but probably exceed the performance at the same time. This G-Series Workhorse belt is a perfect replacement and /or performance belt for your machine. The top cogs offer better cooling and the aramid cords make it extremely strong. The Gates G-Force Workhorse 20G4022 has increased strength and reliability. Replaces Polaris part number 3211077.
- Up to 2x the life of the G-Force Belt.
- 45% increased heat tolerance.
- Power for hauling heavy loads across aggressive terrain
- Improved durability, crack & wear-resistance.
FITS THE FOLLOWING MODEL(S):
1992-’13 Trailblazer 250/330/400’sREPLACES POLARIS PART NUMBER(S) 3211077 and 3211048
$84.95$76.46Trailblazer Gates G-Force Workhorse Drive Belt
$84.95$76.46 -
Trailblazer Primary Clutch Bolt and Washers
Brand new primary clutch bolt and washers for many single cylinder Polaris ATV and UTV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5210748, 7512566, and 7575202. Includes one clutch bolt, one thick flat washer, and one star type washer. Fits the following models and more:
1990-2006 Trailblazer 250
2008-13 Trailblazer 330
Replaces Polaris Part Number: 5210748, 7512566, and 7575202
$8.95$8.06Trailblazer Primary Clutch Bolt and Washers
$8.95$8.06 -
Trailblazer Primary Clutch Puller
Brand new primary clutch puller for almost all 1985 and newer Polaris ATV’s and UTV’s using the P85 primary clutch. Hardened steel puller is plated for corrosion resistance. 10.25″ overall length and 3/4″-16 threads. Be sure to use a dab of grease on the end of the puller and threads to properly pull the clutch. Same as Polaris part number 2870506.
Fits all 1990-2013 Trailblazer 250/330/400 models
Same as Polaris part number 2870506.
$24.95$22.46Trailblazer Primary Clutch Puller
$24.95$22.46 -
Trailblazer Secondary Clutch Puller
The secondary clutch is supposed to slide right off the shaft. However, if neglected, the clutch will be rusted onto the shaft and you simply cannot get it off without this puller. Hardened steel puller is plated for corrosion resistance. 5.5″ overall length. Same as Polaris part number 2870913.
Fits all 1990-2013 Trailblazer 250/330/400 modelsSame as Polaris part number 2870913.
$24.95$22.46Trailblazer Secondary Clutch Puller
$24.95$22.46