ATV
-
Trailblazer Control Arm A-Arm Bushings
Brand new replacement front or rear A-arm bushings! This replaces Polaris part number 5436973. Depending upon the year and model it could fit both left and right sides of the upper and lower a-arm as well as the rear upper a-arm. Sold as a Pack of 2 or Pack of 4. Each a-arm uses two bushings. So order 4 if replacing both control arm bushing sets. These are used on the following models:
1996 Trail Blazer 250 ES
2002 Trail Blazer 250 FreedomReplaces Polaris part Numbers: 5436973, 5431596, 5433066, 5434551, and 5436220
$7.95 – $14.95
$7.16 – $13.46 -
Trailblazer Engine Mounting Nuts (6 PACK)
Brand new replacement engine mounting nuts for Polaris ATV models. These brand new flange hex flange nuts are brand new replacements for Polaris part number 7547108. These identical replacements are zinc coated for a durable finish and even include the factory applied thread locker on inside of the threads. We sell these nuts in a 6 pack. With many applications and other uses across all the Polaris machines be sure to check with the Polaris parts diagrams. The applications listed below show what machines use these nuts for engine mounting.
(Sold as a 6 PACK)
Check out Quad Logic for all your replacement Polaris hardware needs.
Fits the following models:
2001 Worker 500
1999-01 Xplorer 400
2000-02 Xpedition 325
2000-02 Xpedition 425
2003-13 Trail Boss 330
2008-13 Trail Blazer 330
Replaces Polaris Part Number: 7547108
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$7.95$7.16Trailblazer Engine Mounting Nuts (6 PACK)
$7.95$7.16 -
Trailblazer Exhaust Gasket Donut Seal
This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite. It is designed to perform even better than the stock Polaris gasket. Exact replacement for the 1995-02 Scrambler 400, 1996-99 Sport 400, and the 2003 Trail Blazer 400. The Scrambler/Sport 400 uses TWO of these gaskets total: one one each side of the short headpipe. Be sure to order 2 if replacing both. Sold each. Replaces Polaris 5211592.
Replaces Polaris Part # 5211592.
$9.99$8.99Trailblazer Exhaust Gasket Donut Seal
$9.99$8.99 -
Trailblazer Exhaust Gasket Donut Seal
This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite. It is designed to perform even better than the stock Polaris gasket. Exact replacement for your Polaris. Most Trailboss and Trailblazers use TWO gaskets total: one between the short head pipe and main pipe and another between the main pipe and the muffler. Be sure to order 2 if replacing both. Sold each. Replaces Polaris 5243517. Fits the following Polaris ATV models:
2008-13 Trail Blazer 330
2000-02 Trail Boss
2003-13 Trail Boss 330
2000-02 Xpedition 325/425
Replaces Polaris 5243517.
$9.99$8.99Trailblazer Exhaust Gasket Donut Seal
$9.99$8.99 -
Trailblazer Front Hub Oil Seal
Time for a front end rebuild on your Polaris ATV? Make sure to replace the front hub oil seal to prevent and leaks from the front hubs. Quad Logic is now offering these quality replacement seals for Polaris part number 3610020. Be sure to check out our entire lineup of Polaris replacement products.This hub oil seal fit the following models:
1990-03 Trail Blazer 250
2003-04 Trail Blazer 400
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$5.95 – $9.95
$5.36 – $8.96Trailblazer Front Hub Oil Seal
$5.95 – $9.95
$5.36 – $8.96 -
Trailblazer Front Rear Fender Rack Footwell Screw
Check out these quality replacement body screws for your early model Polaris ATV’s. These screws are a direct replacement from Polaris part number 7517264. These screws are used in a variety applications including Footwells, Front Racks, Front and Rear Fenders as well as many other applications. Please check with the Polaris parts diagrams to ensure proper fitment on your machine. These Phillips panhead screws are approximately 3/4″ long by 1/4″ diameter with a with a black corrosion resistant finish, which is identical to the OEM Polaris Screws.These will fit the following models;1997-06 Trailblazer 2502008-09 Trailblazer 3302006-09 Trail Boss 3301996-99 Xplorer 3001996-99 Xplorer 4001997-99 Xpress 300Exact replacement for Polaris #: 7517264
$6.95 – $8.95
$6.26 – $8.06 -
Trailblazer Front Strut Nut
Replace the front strut mounting nuts on your Polaris with these quality replacements from Quad Logic! This is a direct replacement for Polaris part
Fits the following models:
2008-13 Trail Blazer 330
2000-06 Trail Blazer 250
Exact replacement for Polaris: 7547104
$6.95 – $7.95
$6.26 – $7.16 -
Trailblazer Front Strut Rubber Washer
Quad Logic now offers these Quality replacement rubber strut washers for the front of your Polaris ATV. These fit most Polaris ATV models from 1985 – 2021. This is a direct replacement for Polaris 5810291. Save money over the dealership price and check out Quad Logic’s full line up front end rebuild parts for your Polaris ATV.
This listing is for 2 Rubber Strut Washers.
Fits the following models;
2008-13 Trailblazer 330
1990-06 Trailblazer 250
1985-02 Trail Boss 250
2003-13 Trail Boss 330
2000-02 Xpedition 325
2000-02 Xpedition 425
1996-99 Xplorer 300
1999-02 Xplorer 400
1996-97 Xpress 400
1999-96 Xpress 300
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$5.95 – $7.95
$5.36 – $7.16 -
Trailblazer Front Wheel Hub Cover O-Ring
If your front hubs are leaking fluid your o-rings are probably shot. Replace them not before you damage the hub clutches. Sold each or as a pair.
Fits the following:
1990-02 TRAIL BLAZER
2003 TRAIL BLAZER 250
2003 TRAIL BLAZER 400
1996-02 TRAIL BOSS
1993-94 TRAIL BOSS
1989 TRAIL BOSS
1990-92 TRAIL BOSS 250
1995 TRAIL BOSS 250
1988-92 TRAIL BOSS 2X4
2001 TRAIL BOSS 325 SE
2003 TRAIL BOSS 330
1990-92 TRAIL BOSS 350L 2X4
1990-92 TRAIL BOSS 350L 4X4
1987-92 TRAIL BOSS 4X4
1999 WORKER 335
2001 WORKER 500
1999 WORKER 500
2000-02 XPEDITION 325
2000-02 XPEDITION 425
2000-01 XPLORER
1995 XPLORER
1996-99 XPLORER 300
1999-02 XPLORER 400
1996-98 XPLORER 400L
2002 XPLORER 4X4
1997 XPLORER 500
1996-99 XPRESS 300
1996-97 XPRESS 400
Replaces Polaris part number 5410470
$6.95 – $9.95
$6.26 – $8.96 -
Trailblazer Gas/Brake Pedal Bushings
Replace worn out or sloppy brake or gas pedal bushings with these machined brass units. the cheap stock plastic bushings can break, crack, or even deform. Replace them for good with these upgraded bushings. Sold as a single or a pair.Fits the following:1994-03 Trailblazer 250 400 500Replaces Polaris part Number: 5437284
$7.95 – $14.95
$7.16 – $13.46 -
Trailblazer Gates G-Force Workhorse Drive Belt
Quad Logic is now a Gates distributor for all your Polaris ATV and UTV belt needs! These belts are tried and true, torture tested for years. We trust them on all our machines and so should you. They are a much better value than the OEM Polaris belts but probably exceed the performance at the same time. This G-Series Workhorse belt is a perfect replacement and /or performance belt for your machine. The top cogs offer better cooling and the aramid cords make it extremely strong. The Gates G-Force Workhorse 20G4022 has increased strength and reliability. Replaces Polaris part number 3211077.
- Up to 2x the life of the G-Force Belt.
- 45% increased heat tolerance.
- Power for hauling heavy loads across aggressive terrain
- Improved durability, crack & wear-resistance.
FITS THE FOLLOWING MODEL(S):
1992-’13 Trailblazer 250/330/400’sREPLACES POLARIS PART NUMBER(S) 3211077 and 3211048
$84.95$76.46Trailblazer Gates G-Force Workhorse Drive Belt
$84.95$76.46 -
Trailblazer Low Oil Light Indicator
This is the exact same low oil indicator lamp you can get at the dealer but for much less. We cut out the middleman to save you money. Indicator snaps right into your handlebar pod and plugs in just like the original. Replace that burn out or broken light before you have heating issues and dont know it! Fits the 1999-02 Xplorer 400, 1999-01 Scrambler 400, 1999 Sport 400, and 2000-01 Trailblazer 250 models. Replaces Polaris part number 4010140.
Replaces Polaris part number 4010140.
$12.95$11.66Trailblazer Low Oil Light Indicator
$12.95$11.66 -
Trailblazer Primary Clutch Bolt and Washers
Brand new primary clutch bolt and washers for many single cylinder Polaris ATV and UTV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5210748, 7512566, and 7575202. Includes one clutch bolt, one thick flat washer, and one star type washer. Fits the following models and more:
1990-2006 Trailblazer 250
2008-13 Trailblazer 330
Replaces Polaris Part Number: 5210748, 7512566, and 7575202
$8.95$8.06Trailblazer Primary Clutch Bolt and Washers
$8.95$8.06 -
Trailblazer Primary Clutch Buttons
The primary clutch buttons are constantly moving and wearing as you ride. As they wear you will get excessive noise and slop in the clutch. Replace them before it causes more damage. Sold as EACH or as a Set of 6.
Fits the following:
1996-97 Trailblazer 250
2008-12 Trailblazer 330
2000-13 Trailboss 250/330
1996-99 Sport 400
Replaces Polaris part number 5431936.
$8.95 – $39.95
$8.06 – $35.96 -
Trailblazer Primary Clutch Puller
Brand new primary clutch puller for almost all 1985 and newer Polaris ATV’s and UTV’s using the P85 primary clutch. Hardened steel puller is plated for corrosion resistance. 10.25″ overall length and 3/4″-16 threads. Be sure to use a dab of grease on the end of the puller and threads to properly pull the clutch. Same as Polaris part number 2870506.
Fits all 1990-2013 Trailblazer 250/330/400 models
Same as Polaris part number 2870506.
$24.95$22.46Trailblazer Primary Clutch Puller
$24.95$22.46 -
Trailblazer Secondary Clutch Puller
The secondary clutch is supposed to slide right off the shaft. However, if neglected, the clutch will be rusted onto the shaft and you simply cannot get it off without this puller. Hardened steel puller is plated for corrosion resistance. 5.5″ overall length. Same as Polaris part number 2870913.
Fits all 1990-2013 Trailblazer 250/330/400 modelsSame as Polaris part number 2870913.
$24.95$22.46Trailblazer Secondary Clutch Puller
$24.95$22.46
