ATV
-
Roll Pin Punch Tool
Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:
Polaris ATV’s from 1993 to Current
Polaris RZR UTV’s from 2008 to Current
Polaris Ranger UTV’s from 2003 to Current
$24.95$22.46Roll Pin Punch Tool
$24.95$22.46 -
Scrambler 500 Choke Cable Fitting Removal Tool
If you have removed the carburetor on a Polaris ATV you will understand the importance of this NEW tool from Quad Logic! Mikuni 34mm Carburetors didn’t leave any room for a typical wrench to remove the choke cable fitting. This leaves very few options to successfully remove the choke cable with out damaging the brass fitting. We know the pain and fight these daily so we developed this very simple but very effective wrench to make your Polaris carburetor repair fast and simple! These custom made tools are precision cut for a perfect fit and zinc coated to prevent rust. This tool works to remove the choke cable fitting on most Polaris 34mm and 40mm carburetors from 1996 – 2013.
FITS THE FOLLOWING MODELS WITH 34mm – 40mm MIKUNI CARBURETORS:
1997-’12 Scrambler 500 We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.$22.95$20.66Scrambler 500 Choke Cable Fitting Removal Tool
$22.95$20.66 -
Scrambler 500 Engine Coolant Hose
We have developed our own line of replacement radiator hoses for Polaris ATV’s! These fabric reinforced hoses are custom formed and automotive quality. These are an exact replacement to the expensive OEM hoses. If you have any bulges or soft spots in your hoses, replace them now before they split. This short hose runs from the water pump to the cylinder on the engine. Fits the 1997-10 Scrambler 500’s.
Replaces Polaris part number 3084938 and 3085857.
$19.95$17.96Scrambler 500 Engine Coolant Hose
$19.95$17.96 -
Scrambler 500 Rear Hub with Studs
Brand new replacement rear hub for the Scrambler 500. Cast aluminum and finish machined to fit perfectly. Includes brand new installed wheel studs as well. Replaces Polaris part # 2200341 and 5131777. Fits either left or right side and sold Each.
Fits all 1997-12 Scrambler 500’s.
$49.95$44.96Scrambler 500 Rear Hub with Studs
$49.95$44.96 -
Scrambler 500 Spark Plug (BKR6E)
A misfiring engine or loss of spark could simply be a bad spark plug. Replace it quickly and easily with this spark plug you would find at the dealer but not paying the extra cost. Genuine NGK BKR6E spark plug. Sold Each
Fits all the 1997-2012 Scrambler 500’s.
Replaces Polaris Part Numbers: 3070172 and 3084997.
$7.99$7.19Scrambler 500 Spark Plug (BKR6E)
$7.99$7.19 -
Sportsman 34mm Carburetor Billet Side Cover with Gasket
Did you break the brittle plastic throttle cover on your Polaris carburetor? Quad Logic has the fix! Simply bolt this Billet side cover on in place of the broken factory throttle cover. This beautiful billet side cover is machined of 6061 billet aluminum, black anodized, then re-machined for a two tone effect. The center features our Quad Logic gear icon. This listing is for the cover and gasket only. Screws are NOT included. Fits all Polaris ATV and UTV that come factory with the Mikuni 34mm Carburetor. We tested this cover on both the OEM Mikuni carburetor as well as the aftermarket reproduction carburetors. Direct replacement for Polaris part number 3130511.
Fits the following Sportsman models:
2008-’10 SPORTSMAN 300 1999-’00 SPORTSMAN 335 2001-’14 SPORTSMAN 400 2006-’07 SPORTSMAN 450 1996-’01 SPORTSMAN 500 2000-’08 SPORTSMAN 500 6X6 2003-’05 SPORTSMAN 600 2002-’06 SPORTSMAN 700 (Does not fit the Sportsman 500 HO)Also fits the following models:
2000-’02 TRAIL BOSS 250 2001 TRAIL BOSS 325 2003-’13 TRAIL BOSS 330 1999 WORKER 335 1999 WORKER 500 2000-’02 XPEDITION 325 2000-’02 XPEDITION 425 1997 XPLORER 500 1998-’99 BIG BOSS 500 2008 HAWKEYE 2X4 2011 HAWKEYE 2X4 2006 HAWKEYE 2X4/4X4 2007 HAWKEYE 2X4/4X4 2009-’10 HAWKEYE 300 2011-’14 HAWKEYE 400 Replaces Polaris part number(s): 3130511
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$24.95$22.46Sportsman 34mm Carburetor Billet Side Cover with Gasket
$24.95$22.46 -
Sportsman 400 450 Top End Rebuild: Piston, Rings, Top End Gaskets
Rebuild your top end with this complete kit. The kit is centered around a new Namura piston kit. These pistons are top quality and include all the features of the more expensive pistons like teflon coated skirts, anodized domes, and machine finished heads. This kit includes a STANDARD 87.89 MM piston kit with rings, pin and circlip. The top end gasket kit includes head, base, side cover and exhaust gasket to rebuild the top end of your Polaris 400. Even includes the valve seals! Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following parts shown in the photo including:
- Std. Piston Kit
- Head Gasket
- Base Gasket
- Valve Cover Gasket
- Exhaust Gasket
- Cam Cover Gasket
- Water Outlet Gasket
- Valve Seals (4)
- Camshaft Adapter O-ring
This top end repair kit fits the following models:
2001-05 Sportsman 400
2008-14 Sportsman 400
2004-05 Ranger 400
2010-14 Ranger 400
2011-14 Hawkeye 400
2006-07 Sportsman 450
$129.95$116.96 -
Sportsman 400 Clutch Cover Gasket and Screw Kit
Brand new clutch cover gasket and screw kit.
Fits the following and much more:
1999-00 SPORTSMAN 335
2001-05 SPORTSMAN 400
1997 SPORTSMAN 400L
2011-14 SPORTSMAN 400 HO 4X4
You will receive ONE clutch cover foam gasket and SIX clutch cover screws.
The gasket replaces Polaris part numbers 5521148, 5521160, 5521301, 5525160, 5521578, and 5521738. The screws replace Polaris part numbers 7512093, 7512094 and 7512095.
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$18.95$17.06Sportsman 400 Clutch Cover Gasket and Screw Kit
$18.95$17.06 -
Sportsman 400 Inner Tie Rod End
Replace those sloppy, worn out inner tie rod ends with these high quality replacement units. Includes the outer rubber boot. Sold each.
Fits the following:
1999 SPORT 400
2000 SPORTSMAN 335
2001-05 SPORTSMAN 400
2011-14 SPORTSMAN 400 HO 4X4
Replaces Polaris part #7061034 and 7061139.
$26.95$24.26Sportsman 400 Inner Tie Rod End
$26.95$24.26 -
Sportsman 500 (1996-13) Top End Rebuild Kit – Piston, Gaskets
Rebuild your top end with this complete kit. The kit is centered around a new Namura piston kit. These pistons are top quality and include all the features of the more expensive pistons like teflon coated skirts, anodized domes, and machine finished heads. This kit includes a STANDARD 91.97 MM piston kit with rings, pin and circlip. The top end gasket kit includes head, base, side cover and exhaust gasket to rebuild the top end of your Polaris 500. Even includes the valve seals! Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following parts shown in the photo including:
- Std. Piston Kit
- Head Gasket
- Base Gasket
- Valve Cover Gasket
- Exhaust Gasket
- Cam Cover Gasket
- Water Outlet Gasket
- Valve Seals (4)
- Camshaft Adapter O-ring
This top end repair kit fits the following models:
1996-13 Polaris Sportsman 500
$124.95$112.46Sportsman 500 (1996-13) Top End Rebuild Kit – Piston, Gaskets
$124.95$112.46 -
Sportsman 500 (1999-2013) Throttle Cable
Black vinyl coil-wound housing. Meets or exceeds O.E. quality. Inner nylon sleeve for longer life and smooth operation.
FITS THE FOLLOWING MODEL(S):
1999-’13 SPORTSMAN 500 (DOES NOT FIT EFI MODELS)
REPLACES POLARIS PART NUMBER(S): 7080709, 7081346, 7080967 and 7081170.
$24.95$22.46Sportsman 500 (1999-2013) Throttle Cable
$24.95$22.46 -
Sportsman 500 A-Arm Rebuild Kit : Bushings, Shaft, Bolts
Get that sloppy a-arm nice and tight again with this simple rebuild kit. Includes a new pivot shaft, two bushings, two bolts and lock washers. The shaft is 5/8″ x 11-1/8″ long and is threaded on both ends.
This kit fits the front lower a-arm on almost every Polaris strut model ATV. Fits the lower control arms on both the left and right side.
Replaces Polaris part number 5020681, 5020964, 5133806, 5434551, 7512492.
Sold as a kit for ONE a-arm.
Fits the following models:
2006-07 Sportsman 450
1996-13 Sportsman 500Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$27.95$25.16Sportsman 500 A-Arm Rebuild Kit : Bushings, Shaft, Bolts
$27.95$25.16 -
Sportsman 500 Camshaft and Rocker Kit
This aftermarket camshaft and rocker kit is a direct replacement to the OEM right down to the adjusters. Sportsman 500’s are notorious for prematurely wearing out the lobes, especially the center lobe. This cam has the same lift and duration to get you running again. The HO style grind will work on all Sportsman 500’s, but non-HO models would benefit more when using the larger carburetor. Also when rebuilding your engine, make sure to replace the rockers. Even if your rocker is only slightly worn, the chrome plating is probably grooved or coming off. If you have the motor apart, this is the time to replace that exhaust rocker. Failure to use new rockers could lead to premature cam failure in the future. These rockers are the perfect replacement and also include the adjusters. This kit is the perfect alternative to the expensive OEM cam and rockers! Kit includes (1) camshaft, (1) exhaust rocker arm and (2) intake rocker arms. Replaces Polaris Number(s): 3085855, 3084898, 3086212, 3084913 and 3084910.
FITS THE FOLLOWING APPLICATIONS:
1996-’13 SPORTSMAN 500
REPLACES POLARIS PART NUMBER(S): 3085855, 3084898 & 3086212, 3084913 and 3084910.
$179.95$161.96Sportsman 500 Camshaft and Rocker Kit
$179.95$161.96 -
Sportsman 500 Choke Cable
Black vinyl coil-wound housing. Meets or exceeds O.E. quality. Inner nylon sleeve for longer life and smooth operation.
Fits the 2001-13 Sportsman 500 carb models.
Replaces Polaris # 7080902, 7081008, 7081176, and 7081171.
$22.95$20.66Sportsman 500 Choke Cable
$22.95$20.66 -
Sportsman 500 Complete Engine Gasket and Seal Set
Kit includes all the neccessary gaskets and seals to rebuild the engine of your Polaris 500. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following gaskets shown in the photo including:
- Head Gasket
- Base Gasket
- Valve Cover Gasket
- Exhaust Gasket
- Cam Cover Gasket
- Water Outlet Gasket
- Valve Seals (4)
- Camshaft Adapter O-ring
- Starter Gasket
- Recoil Gasket
- Crankshaft Seals
- Water pump oil seal
This gasket kit fits the following models:
1996-13 Polaris Sportsman 500
$59.95$53.96Sportsman 500 Complete Engine Gasket and Seal Set
$59.95$53.96 -
Sportsman 500 Engine Motor Mount
New replacement front (and rear in some cases) motor mount. This is an exact replacement 60 durometer motor mount for your Polaris ATV/UTV. The studs are 3/8-24 and 3/8-16. The mount is 1-7/8″ diameter by 7/8″ thick. Replaces Polaris 3110046 and 3022072. Sold EACH. Some models use two of these mounts so order two if replacing both. Fits the following models:
1999-00 Sportsman 335
2001-05 Sportsman 400
2006-07 Sportsman 450
1996-10 Sportsman 500 (All)
2000-13 Trail boss1999-01 Diesel1999-01 Worker 5001997 Xplorer 500Replaces Polaris part Numbers: 3110046 and 3022072
$19.95$17.96Sportsman 500 Engine Motor Mount
$19.95$17.96