ATV
-
Sportsman Tie Rod End To Spindle Washers (4 PACK)
Brand new washers for your Polaris Sportsman. These washers are specifically used on the outer tie rod ends of models Polaris Sportsman models. These yellow zinc washers are an exact replacement for Polaris Part number 7556099. 2 washers are used each side of machine, 1 on top of spindle and 1 on the bottom as shown in pictures above. these are sold as a 4 pack so you can replace both sides of the machine.
This listing is for 4 washers only. No other hardware is included in the listing. Please check out Quad Logic for all your Polaris hardware needs.
Fits the following models and many more
2000 Sportsman 335
2000-19 Sportsman 500
2001-14 Sportsman 400
2002-07 Sportsman 700
2006-14 Sportsman 800
2014-22 Sportsman 570
2016-22 Sportsman 450
2020-22 Sportsman 850
2020-22 Sportsman 1000
REPLACES POLARIS PART NUMBER(S): 7556099
$6.95$6.26 -
Sportsman Ignition Keyswitch Repair Harness Pigtail
The connectors to the Polaris ATV ignition switches are prone to corroding and preventing the switch from working. Even the tab is brittle so they can easily break off and need to be replaced. Don’t buy the whole wire harness from Polaris!! We have this easy pigtail kit to splice in the new connector. This direct replacement plug fits a huge number of 2002 and newer Polaris ATV models and will get your ignition switch working again. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail. Our pigtail fits perfectly to the ignition switch and has a nice wire sheathing protecting the wires going into the plug. The wires are 6″ long so it can be fixed inside the headlight pod. Sold Each. Includes butt connectors and zip ties. Fits all 6 pin ignition switches such as Polaris part number 4010390, 4011002, 4012165, 4012166. Fits the models listed below and more:
2008-10 Sportsman 300
2002-14 Sportsman 400
2006-18 Sportsman 450
2002-13 Sportsman 500
2009-14 Sportsman 550
2014-18 Sportsman 570
2003-05 Sportsman 600
2002-07 Sportsman 700
2005-14 Sportsman 800
2009-17 Sportsman 8502010-19 Sportsman 850 Touring
2015-17 Sportsman 10002015-18 Sportsman 1000 Touring
2015 Sportsman ETXWorks with Polaris Part Number: 4010390, 4011002, 4012165, 4012166
$24.95$22.46Sportsman Ignition Keyswitch Repair Harness Pigtail
$24.95$22.46 -
Sportsman 500 Rear Brake Rotor
Bad brakes in your Polaris Sportsman? Bolt on these quality replacement rotors from Quad Logic. Our rotor will last way longer than the stock unit. We use a very wear resistant steel and then zinc plate it for corrosion resistance. This rotor is the logical choice for your Sportsman! This REAR rotor fits the following models:
2016-21 Sportsman 450
2007-13 Sportsman 500
Replaces Polaris rotor part numbers 5248250.
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$34.95$31.46Sportsman 500 Rear Brake Rotor
$34.95$31.46 -
Sportsman 500 Front Ball Joint Puller Removal Tool
Pulling the ball joints from the aluminum strut housing on most Polaris ATV’s can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel puller simply goes over the balljoint, install the nut, and turn out the inner puller to remove the ball joint. A 6 point 1″ socket is required. Zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
Unlike other tools on the market that use all of the old ball joints threads, this tool only uses the top few threads of the ball joint. If your threads are damaged, those other pullers will not work! Even in your threads are damaged you can normally still make our puller work due to the dual puller design. Does the balljoint spin freely or slop up and down in its housing? No problem, this puller will easily remove it! Complete instructions are included.
This puller can be used on almost any Polaris ATV or UTV with the strut style front suspension from about 1985 to current.
You can view a video of the puller in action on Youtube here, just copy and past the URL into your browser:
https://youtu.be/NgGPTWaG5Q0
$39.95$35.96Sportsman 500 Front Ball Joint Puller Removal Tool
$39.95$35.96 -
Roll Pin Punch Tool
Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:
Polaris ATV’s from 1993 to Current
Polaris RZR UTV’s from 2008 to Current
Polaris Ranger UTV’s from 2003 to Current
$24.95$22.46Roll Pin Punch Tool
$24.95$22.46 -
$190.00$95.00 -
-
-