ATV
-
Trailblazer/Trailboss 250 Top End Gasket Kit
Kit includes head, base, and exhaust gasket to rebuild the top end of your Polaris 250. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following top end gaskets shown in the photo including:
Head Gasket
Base Gasket
Exhaust GasketThis gasket kit fits the following models:
1990-2006 Trailblazer 250
1989-92 Trailboss 250
1989-92 Big Boss 250
2000-02 Xplorer 250
$24.95$22.46Trailblazer/Trailboss 250 Top End Gasket Kit
$24.95$22.46 -
Trailblazer Secondary Clutch Puller
The secondary clutch is supposed to slide right off the shaft. However, if neglected, the clutch will be rusted onto the shaft and you simply cannot get it off without this puller. Hardened steel puller is plated for corrosion resistance. 5.5″ overall length. Same as Polaris part number 2870913.
Fits all 1990-2013 Trailblazer 250/330/400 modelsSame as Polaris part number 2870913.
$24.95$22.46Trailblazer Secondary Clutch Puller
$24.95$22.46 -
Trailblazer Primary Clutch Puller
Brand new primary clutch puller for almost all 1985 and newer Polaris ATV’s and UTV’s using the P85 primary clutch. Hardened steel puller is plated for corrosion resistance. 10.25″ overall length and 3/4″-16 threads. Be sure to use a dab of grease on the end of the puller and threads to properly pull the clutch. Same as Polaris part number 2870506.
Fits all 1990-2013 Trailblazer 250/330/400 models
Same as Polaris part number 2870506.
$24.95$22.46Trailblazer Primary Clutch Puller
$24.95$22.46 -
Trailblazer Primary Clutch Bolt and Washers
Brand new primary clutch bolt and washers for many single cylinder Polaris ATV and UTV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5210748, 7512566, and 7575202. Includes one clutch bolt, one thick flat washer, and one star type washer. Fits the following models and more:
1990-2006 Trailblazer 250
2008-13 Trailblazer 330
Replaces Polaris Part Number: 5210748, 7512566, and 7575202
$8.95$8.06Trailblazer Primary Clutch Bolt and Washers
$8.95$8.06 -
Trailblazer Low Oil Light Indicator
This is the exact same low oil indicator lamp you can get at the dealer but for much less. We cut out the middleman to save you money. Indicator snaps right into your handlebar pod and plugs in just like the original. Replace that burn out or broken light before you have heating issues and dont know it! Fits the 1999-02 Xplorer 400, 1999-01 Scrambler 400, 1999 Sport 400, and 2000-01 Trailblazer 250 models. Replaces Polaris part number 4010140.
Replaces Polaris part number 4010140.
$12.95$11.66Trailblazer Low Oil Light Indicator
$12.95$11.66 -
Trailblazer Gates G-Force Workhorse Drive Belt
Quad Logic is now a Gates distributor for all your Polaris ATV and UTV belt needs! These belts are tried and true, torture tested for years. We trust them on all our machines and so should you. They are a much better value than the OEM Polaris belts but probably exceed the performance at the same time. This G-Series Workhorse belt is a perfect replacement and /or performance belt for your machine. The top cogs offer better cooling and the aramid cords make it extremely strong. The Gates G-Force Workhorse 20G4022 has increased strength and reliability. Replaces Polaris part number 3211077.
- Up to 2x the life of the G-Force Belt.
- 45% increased heat tolerance.
- Power for hauling heavy loads across aggressive terrain
- Improved durability, crack & wear-resistance.
FITS THE FOLLOWING MODEL(S):
1992-’13 Trailblazer 250/330/400’sREPLACES POLARIS PART NUMBER(S) 3211077 and 3211048
$84.95$76.46Trailblazer Gates G-Force Workhorse Drive Belt
$84.95$76.46 -
Trailblazer Exhaust Gasket Donut Seal
This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite. It is designed to perform even better than the stock Polaris gasket. Exact replacement for your Polaris. Most Trailboss and Trailblazers use TWO gaskets total: one between the short head pipe and main pipe and another between the main pipe and the muffler. Be sure to order 2 if replacing both. Sold each. Replaces Polaris 5243517. Fits the following Polaris ATV models:
2008-13 Trail Blazer 330
2000-02 Trail Boss
2003-13 Trail Boss 330
2000-02 Xpedition 325/425
Replaces Polaris 5243517.
$9.99$8.99Trailblazer Exhaust Gasket Donut Seal
$9.99$8.99 -
Trailblazer Exhaust Gasket Donut Seal
This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite. It is designed to perform even better than the stock Polaris gasket. Exact replacement for the 1995-02 Scrambler 400, 1996-99 Sport 400, and the 2003 Trail Blazer 400. The Scrambler/Sport 400 uses TWO of these gaskets total: one one each side of the short headpipe. Be sure to order 2 if replacing both. Sold each. Replaces Polaris 5211592.
Replaces Polaris Part # 5211592.
$9.99$8.99Trailblazer Exhaust Gasket Donut Seal
$9.99$8.99 -
Trailblazer Engine Mounting Nuts (6 PACK)
Brand new replacement engine mounting nuts for Polaris ATV models. These brand new flange hex flange nuts are brand new replacements for Polaris part number 7547108. These identical replacements are zinc coated for a durable finish and even include the factory applied thread locker on inside of the threads. We sell these nuts in a 6 pack. With many applications and other uses across all the Polaris machines be sure to check with the Polaris parts diagrams. The applications listed below show what machines use these nuts for engine mounting.
(Sold as a 6 PACK)
Check out Quad Logic for all your replacement Polaris hardware needs.
Fits the following models:
2001 Worker 500
1999-01 Xplorer 400
2000-02 Xpedition 325
2000-02 Xpedition 425
2003-13 Trail Boss 330
2008-13 Trail Blazer 330
Replaces Polaris Part Number: 7547108
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$7.95$7.16Trailblazer Engine Mounting Nuts (6 PACK)
$7.95$7.16 -
Trailblazer Clutch Intake/Outlet Tube Rubber Boot
Brand new clutch air intake boot. Replace that old dried out cracked one with this new one. Depending upon the year this boot fits between the front of the engine/clutch inlet to the vertical plastic clutch inlet tube and/or the clutch cover outlet tube. Replaces Polaris part number # 5410421.
Fits the 1990-03 Trailblazer 250’s.
$14.95$13.46Trailblazer Clutch Intake/Outlet Tube Rubber Boot
$14.95$13.46 -
Trailblazer Clutch Cover Gasket and Screw Kit
Replace your leaking clutch cover gasket with this quality replacement gasket from Quad Logic. To make your installation easy we took the time to group these gaskets with new screws into a complete kit! This kit includes 1 Clutch Cover Gasket, 7 Screws
This kit replaces Polaris part numbers:
Clutch Cover Gasket, 5521148, 5521160, 5521301, 5525160, 5521578, 5521738
Screws, 7512094, 7512093, 7512095, 7512093
This kit works with the following models;
1999 Worker 335
1999-01 Worker 500
2000-02 Xplorer 250
1996-99 Xplorer 300
1996-02 Xplorer 400
1997 Xplorer 500
1996-99 Xpress 300
1996-97 Xpress 400
2003 Trail Blazer 400
1996-02 Trail Boss 250
2001-02 Trail Boss 325
1997-02 Trail Blazer 250
REPLACES POLARIS PART NUMBER(S): 5521148, 5521160, 5521301, 5525160, 5521578, 5521738, 7512094, 7512093, 7512095, 7512093
$22.95$20.66Trailblazer Clutch Cover Gasket and Screw Kit
$22.95$20.66 -
Trailblazer Carburetor Needle and Seat
New replacement needle and seat for your Polaris ATV carburetor. Includes a new needle, seat, and rubber sealing o-ring. Installs just like stock to get your fuel flowing properly again. Replaces Polaris part number 3130495. Fits the following Polaris two stroke ATV’s:
1994-97 400L1995-01 Scrambler 4001994-99 Sport 4001996-97 Trailblazer 2501995-01 Xplorer 4001996-97 Xpress 300/400Replaces Polaris 3130495.
$23.95$21.56Trailblazer Carburetor Needle and Seat
$23.95$21.56 -
Trailblazer Carburetor Needle & Seat
New replacement 2.5 needle and seat for your Polaris ATV carburetor. Includes a new viton tipped needle and brass seat. Installs just like stock to get your fuel flowing properly again. Replaces Polaris part number 3130360. Fits the following Polaris two stroke ATV’s and more:
1990-01 Trailblazer1985-99 Trail Boss1993-95 250/300/350L models1996-97 Sport 4001996-01 Xplorer 250/3001996-99 Xpress 300/4001993-95 250/300/350L modelsReplaces Polaris part number 3130360
$19.95$17.96Trailblazer Carburetor Needle & Seat
$19.95$17.96 -
Trailblazer 400 Top End Gasket Set
Kit includes head gasket, base gasket, reed valve gasket and exhaust gasket to rebuild the top end of your Polaris ATV 400 two stroke. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following top end gaskets shown in the photo including:
- Head Gasket (Replaces Polaris # 3084731)
- Base Gasket (Replaces Polaris # 3084729)
- Reed Valve Gasket (Replaces Polaris # 3084148)
- Exhaust Gasket (Replaces Polaris #3084439, 3086757)
This gasket kit fits the following models:
1994-95 400L
1994-97 400L Big Boss
1995-02 Scrambler 400
1994-99 Sport 400
1994-97 Sportsman 400L
1996-97 Xpress 400
1995-02 Xplorer 400
2003 Trail Blazer 400
$24.95$22.46Trailblazer 400 Top End Gasket Set
$24.95$22.46 -
Trailblazer 400 (1994-03) Magneto Stator
Complete replacement stator for your Polaris Trail Blazer, Scrambler, and Sport. This is an excellent quality RM stator brand replacement unit. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part #3084785 and 3084788. Fits all the following Polaris models:
1996-97 and 03 Trail Blazer 400
1995-02 Scrambler 400
1996-99 and 94 Sport 400
Replaces Polaris part #3084785 and 3084788.
$199.95$179.96Trailblazer 400 (1994-03) Magneto Stator
$199.95$179.96 -
Trailblazer 250 Clutch Outlet Tube Rubber Boot
Brand new clutch air outlet boot. Replace that old dried out cracked one with this new one. This boot fits between the clutch cover outlet and plastic tube (near your left leg). Replaces Polaris part number # 5411489.
FITS THE FOLLOWING MODELS(S):
2002-05 Trail Blazer 330 2002-05 Trail Boss 330 1998-99 Big Boss 500 1999 Worker 335 1999-01 Worker 500 2002 Xplorer 400 2004-05 ATP 330 2004-05 ATP 500 REPLACES POLARIS PART NUMBER(S): 5411489
$11.95$10.76Trailblazer 250 Clutch Outlet Tube Rubber Boot
$11.95$10.76
