ATV
-
Trailblazer 400 (1994-03) Magneto Stator
Complete replacement stator for your Polaris Trail Blazer, Scrambler, and Sport. This is an excellent quality RM stator brand replacement unit. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part #3084785 and 3084788. Fits all the following Polaris models:
1996-97 and 03 Trail Blazer 400
1995-02 Scrambler 400
1996-99 and 94 Sport 400
Replaces Polaris part #3084785 and 3084788.
$199.95$179.96Trailblazer 400 (1994-03) Magneto Stator
$199.95$179.96 -
Trail Blazer 250 Magneto Stator
Complete replacement stator for your Polaris ATV. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part # 3083979. Fits following models listed below.
1990-2006 Trail Blazer 250
Replaces Polaris Part Number: 3083979
$199.95$179.96Trail Blazer 250 Magneto Stator
$199.95$179.96 -
Sportsman 400 (1994-96) Magneto Stator
Complete replacement stator for your Polaris ATV. This is an excellent quality RM stator brand replacement unit. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part #3084763. Fits all the following Polaris models:
1995-02 Xplorer 400
1994-96 Sportsman 400
1994-95 400L
1995 Sport 400
1996-97 Xpress 400L
1994-97 Big Boss 400L
Replaces Polaris part #3090155.
$199.95$179.96Sportsman 400 (1994-96) Magneto Stator
$199.95$179.96 -
Sportsman 500 STEEL Rear Rack
Replace that broken rear rack with these STEEL rear racks from Quad Logic. Forget about broken racks for good! These steel racks have a tubular substructure with a sheet metal top layer to mimic the look of the factory racks. Our racks look like factory equipment but can actually handle heavy loads and cold temperatures without a problem.
These racks are finished in a beautiful black texture powdercoat for a long lasting finish. It is a very grippy finish that helps keep your gear from sliding around like on the factory racks. There are as many or more tie down points for straps as well. Installation in a snap and the mounting hardware is included.
Plastic does not belong on an ATV! The fit and finish are excellent, these look like they are factory equipment, the way your ATV should have been. These racks will NOT accept rack extensions or other accessories without modification. This is for the REAR only. Replaces Polaris part numbers 2670174, 2632837-070 and 2670174-070.
Fits the following models and more (Does not fit 2004-1/2 models):
1999-00 Sportsman 335
2001-04 Sportsman 400
1996-04 Sportsman 500Replaces Polaris Part Numbers: 2670174, 2670174-070, 2632836-070, 2632837-070, 2632637-070 and 2632667-070
$179.95$161.96Sportsman 500 STEEL Rear Rack
$179.95$161.96 -
Sportsman 500 STEEL Front Rack
Calling all 1996-03 Sportsman owners! Following our extremely popular steel floorboards are these brand new steel front racks! Forget about broken racks for good! These steel racks have a tubular substructure with a sheet metal top layer to mimic the look of the factory racks. These racks look so good most people wont notice they are aftermarket. We kept the look and integrity of the machine while giving it a huge upgrade in strength. Those of you who load up your racks or ride their machine off road a lot know, the plastic racks do not hold up!
These racks are finished in a beautiful black texture powdercoat for a long lasting finish. It is a very grippy finish that helps keep your gear from sliding around like on the factory racks. There are as many or more tie down points for straps as well. Installation in a snap, it uses the same four mounting bots as stock.
Plastic does not belong on an ATV! The fit and finish are excellent, these look like they are factory equipment, the way your Sportsman should have been. Fits just like stock, you can re-use all the original hardware. These racks will NOT accept rack extensions or other accessories without modification. This is for the FRONT only. Replaces Polaris part numbers 2670180 and 2670180-070.
Fits the following models and more:
1999-00 Sportsman 335
2001-03 Sportsman 400
1996-03 Sportsman 500
$179.95$161.96Sportsman 500 STEEL Front Rack
$179.95$161.96 -
Sportsman 500 Camshaft and Rocker Kit
This aftermarket camshaft and rocker kit is a direct replacement to the OEM right down to the adjusters. Sportsman 500’s are notorious for prematurely wearing out the lobes, especially the center lobe. This cam has the same lift and duration to get you running again. The HO style grind will work on all Sportsman 500’s, but non-HO models would benefit more when using the larger carburetor. Also when rebuilding your engine, make sure to replace the rockers. Even if your rocker is only slightly worn, the chrome plating is probably grooved or coming off. If you have the motor apart, this is the time to replace that exhaust rocker. Failure to use new rockers could lead to premature cam failure in the future. These rockers are the perfect replacement and also include the adjusters. This kit is the perfect alternative to the expensive OEM cam and rockers! Kit includes (1) camshaft, (1) exhaust rocker arm and (2) intake rocker arms. Replaces Polaris Number(s): 3085855, 3084898, 3086212, 3084913 and 3084910.
FITS THE FOLLOWING APPLICATIONS:
1996-’13 SPORTSMAN 500
REPLACES POLARIS PART NUMBER(S): 3085855, 3084898 & 3086212, 3084913 and 3084910.
$179.95$161.96Sportsman 500 Camshaft and Rocker Kit
$179.95$161.96 -
Trailblazer 2 stroke Flywheel
Complete new replacement flywheel for your Polaris 2 Stroke ATV. The stock flywheels are prone to failure, especially the magnets coming loose or breaking. Fix it for good with our aftermarket flywheel that is a big improvement over the stock unit. It starts with using a higher temp epoxy that eliminates magnet detachment. High strength steel capping prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator. Lastly, these stators are precision balanced to reduce vibration and add longevity to your engine. Installation is just like stock. Replaces Polaris part numbers: 3084760, and 3084784.
Fits all the following Polaris models:
2003 Trail Blazer 400
1994-97 Big Boss 400
1996-97 Xpress 300
1996-97 Xpress 400
1995-02 Xplorer 400
1994-99 Sport 400
1995-02 Scrambler 400
1994-97 Sportsman 400
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$174.95$157.46Trailblazer 2 stroke Flywheel
$174.95$157.46 -
Interparts Complete Drive Axle, Front L-R – 1995-2002 Polaris
Interparts Complete Drive Axle, Front L-R – 1995-2002 Polaris
$143.98$71.99 -
Sportsman 500 (1996-13) Top End Rebuild Kit – Piston, Gaskets
Rebuild your top end with this complete kit. The kit is centered around a new Namura piston kit. These pistons are top quality and include all the features of the more expensive pistons like teflon coated skirts, anodized domes, and machine finished heads. This kit includes a STANDARD 91.97 MM piston kit with rings, pin and circlip. The top end gasket kit includes head, base, side cover and exhaust gasket to rebuild the top end of your Polaris 500. Even includes the valve seals! Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following parts shown in the photo including:
- Std. Piston Kit
- Head Gasket
- Base Gasket
- Valve Cover Gasket
- Exhaust Gasket
- Cam Cover Gasket
- Water Outlet Gasket
- Valve Seals (4)
- Camshaft Adapter O-ring
This top end repair kit fits the following models:
1996-13 Polaris Sportsman 500
$124.95$112.46Sportsman 500 (1996-13) Top End Rebuild Kit – Piston, Gaskets
$124.95$112.46 -
YUASA Battery #YTX16-BS-1 – 1987-2009 Suzuki
YUASA Battery #YTX16-BS-1 – 1998-2004 Suzuki
$115.95$104.36YUASA Battery #YTX16-BS-1 – 1987-2009 Suzuki
$115.95$104.36 -
Galfer Wave Rotor, Rear – 1990-2000 Yamaha YFM350 Warrior
Galfer Wave Rotor, Rear – 1990-2000 Yamaha YFM350 Warrior
$108.98$54.49Galfer Wave Rotor, Rear – 1990-2000 Yamaha YFM350 Warrior
$108.98$54.49 -
Interparts Complete Drive Axle, Front L-R – 1989-2005 Kawasaki Bayou 300/400
Interparts Complete Drive Axle, Front L-R – 1989-2005 Kawasaki Bayou
$105.98$52.99 -
Interparts Complete Drive Axle, Front R – 1995-2001 Honda TRX400 4X4 Foreman
Interparts Complete Drive Axle, Front R – 1995-2001 Honda TRX400 4X4 Foreman
$105.98$52.99 -
Interparts Complete Drive Axle, Front L – 1995-2001 Honda TRX400 4X4 Foreman
Interparts Complete Drive Axle, Front L – 1995-2001 Honda TRX400 4X4 Foreman
$105.98$52.99 -
Interparts Complete Drive Axle, Front L-R – 1995-2001 Yamaha 350/400
Interparts Complete Drive Axle, Front L-R – 1995-2001 Yamaha
$105.98$52.99 -
Wiseco Top End Gasket Kit, 1996-2013 Honda 400cc
Wiseco Top End Gasket Kit – 1996-2013 Honda 400cc
$101.90$50.95Wiseco Top End Gasket Kit, 1996-2013 Honda 400cc
$101.90$50.95
