ATV
-
Renegade Billet Thermostat Housing
Replace your OEM thermostat housing with this billet aluminum Quad Logic version. When you get them from the factory you can’t change the thermostat without changing the whole housing. With our product you can easily remove or replace your thermostat if it ever goes out. Great product for people who want to run a cooler temp thermostat, thermostat delete or just like being able to change your thermostat out if it ever goes bad. Easily installs right where the factory thermostat housing does. All hardware is included. Replaces Can-Am part number 709200406. Fits the following models:
2012-2015 Can-Am Renegade 1000
2016-2019 Can-Am Renegade 1000 R
2017-2019 Can-Am Renegade 570
2016-2019 Can-Am Renegade 850Replaces Can-Am part number 709200406.
$119.95$107.96Renegade Billet Thermostat Housing
$119.95$107.96 -
Renegade Front Differential Bearing and Seal Kit
If your rear diff is making some noise or completely blown, this bearing and seal kit will smooth it out again. These brand new bearings and seals are direct replacements. Includes all the bearings and seals shown to complete the rebuild. Fits the following Can-Am models:
2008-2015 Renegade 500
2012 Renegade 500 XT
2016 Renegade 570 EFI
2007-2015 Renegade 800
2016 Renegade 850
2012-2015 Renegade 1000
2016 Renegade 1000 XMR
$79.95$71.96Renegade Front Differential Bearing and Seal Kit
$79.95$71.96 -
Renegade Fuel Pressure Regulator
Having running or fuel issues with your EFI Can-Am? In many cases the fuel pressure regulator is the culprit. Can-Am will not sell you just the fuel pressure regulator, they make you buy the entire fuel pump assembly as a unit for a ridiculous amount of money. Don’t worry, we have your back. Installs in the stock location just like OEM unit and keeps your fuel pressure at a constant 50-52 PSI. You will only receive the fuel pressure regulator with new o-rings. Sold each. Fits the following models and more:
2009-15 Can-Am Renegade 500
2016 Can-Am Renegade 570
2007-15 Can-Am Renegade 800
2016 Can-Am Renegade 850
2012-16 Can-Am Renegade 1000
$39.95$35.96Renegade Fuel Pressure Regulator
$39.95$35.96 -
Scrambler 1000 Bottom End Crankshaft Assembly
New replacement bottom end crankshaft assembly for your Polaris Scrambler 1000! Exact replacement and ready to be dropped into your engine. Does NOT included main bearing or seals. Replaces Polaris Number(s): 2205143.
FITS THE FOLLOWING MODELS:
2015-’22 SCRAMBLER 1000 2014-’22 SCRAMBLER XP 1000 REPLACES POLARIS PART NUMBER(S): 2205143
$999.95$899.96Scrambler 1000 Bottom End Crankshaft Assembly
$999.95$899.96 -
Scrambler 850 / 1000 Front Pinion Cover Bearing
Quality replacement front pinion cover bearing for your Scrambler 850 and 1000. Fix the worn out bearing in your front diff cover before is get too bad costing you more in the front differential. Polaris sells the replacements as a complete assembly, this means expensive repairs from the dealership. At Quad logic we offer individual components allowing you to fix your machine at a fraction of the dealership cost. We also offer a billet replacement from differential cover to add style to your machine. This listing is for the front differential cover bearing only.
REPLACES POLARIS NUMBER(S): 3235438FITS THE FOLLOWING MODELS:
2013-’15 SCRAMBLER 850 2015-’17 SCRAMBLER 1000 2014-’17 SCRAMBLER XP 1000 We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed. Returns are subject to 15% restocking fee.
$14.95$13.46Scrambler 850 / 1000 Front Pinion Cover Bearing
$14.95$13.46 -
Scrambler 850 /1000 Billet Aluminum Oil Level Dipstick and O-Ring
New replacement BILLET ALUMINUM Oil Level Dipstick for your Sportsman or Scrambler 850/1000. Exact replacement and includes the sealing O-ring. Replaces Polaris 2521028 and 5412530.
FITS THE FOLLOWING MODEL(S):
2014-’23 SCRAMBLER XP 1000 2013-’23 SCRAMBLER 850 REPLACES POLARIS PART NUMBER(S): 2521028 and 5412530.
$34.95$31.46 -
Scrambler 850 1000 REAR UPPER A-Arm Bushing Rebuild Kit
Brand new complete REAR UPPER a-arm rebuild kit. This full kit will get your rear a-arm tight again like it should be. Revive your ride and handling by eliminating the sloppy or seized bushings and shafts in your rear a-arm. Brand new high quality parts that are direct replacements to the original! This kit will repair ONE rear upper a-arm. The following parts are included:
2 – Inner A-arm bushings – Replaces Polaris 5436973
1 – Inner A-arm shaft – Replaces Polaris 5137594, 5136468
1 – Inner Bolt – Replaces Polaris 7518472
1 – Inner Nut – Replaces Polaris 7547313
2 – Outer A-Arm Bushings – Replaces Polaris 5436832
1 – Outer A-Arm Shaft – Replaces Polaris 5137590, 5135501
1 – Outer Bolt – Replaces Polaris 7518675
1 – Outer Nut – Replaces Polaris 7547313
Everything in the shown diagram is included except the Zerk fitting and the A-Arm itself. This kit fits the following models:
2013-15 Scrambler 850
2014-15 Scrambler 1000
2010-14 Sportsman 550
2010-15 Sportsman 850
2015 Sportsman 1000
REPLACES POLARIS PART NUMBER(S): 5436973, 5137594, 5136468, 7518472, 7547313, 5436832, 5137590, 5135501, 7518675, 7547313
$39.95$35.96Scrambler 850 1000 REAR UPPER A-Arm Bushing Rebuild Kit
$39.95$35.96 -
Scrambler 850 1000 Winch Mount Kit
Heavy gauge steel Winch Mount Kit specific for your Polaris models. Kit provides the hardware necessary to mount a winch to your Polaris and are designed to fit Cycle Country, Kolpin & other branded aftermarket winches.
This winch bracket is a direct bolt on for the following models.2013-22 Scrambler 8502014-20 Scrambler 1000 (Does not fit 55″ S Model)– Winch mount kit includes all hardware necessary to mount a winch to your vehicle-Designed to fit Kolpin, Cycle Country and most available winches with common bolt patterns-Made with Heavy gauge steel-Powder coat paint protectionWe make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$79.95$71.96Scrambler 850 1000 Winch Mount Kit
$79.95$71.96 -
Scrambler 850/1000 Quick Release Dzus Fastener Side Panel Hardware Kit
It’s very frustrating that Polaris has stooped to using those cheap plastic rivets to attach body panels on their ATV’s. Not only do they break or loosen up over time but you need a special pliers to remove them. The Scrambler 850/1000 side panels are held on with these plastic rivets, what are you to do if you have an engine issue out on the trail and you don’t have tools to remove them? Who wants to grab special pliers to remove the side panels every time you wash it?
We are problem solvers here at Quad Logic and like to make your life easier. We developed this super trick Dzus fastener kit to easily remove your side panels without tools! They are also much stronger and will not break like the plastic rivets. After some simple installation, all it takes is a quarter turn of the fasteners and the side panel can be removed or installed. Don’t worry about dropping or losing any hardware either, it all stays attached to the side panels!
This kit includes everything you need to install it on both side panels including instructions. Definitely recommended for all Scrambler 850/1000 owners!FITS THE FOLLOWING MODELS:
2013-’22 Scrambler 850
2014-’22 Scrambler 1000$39.95$35.96 -
Scrambler REAR/ FRONT A-Arm Bolt, Nut, Washer Kit
Brand new front and rear a-arm bolt kit for many Polaris ATV’s. Brand new high quality bolt, washer, and nut for many Polaris machines that are exactly the same as the original! This replaces Polaris part number 7518466, 5137346, and 7547313. Fits the following models and more:
2010-14 Sportsman 550
2010-18 Sportsman 850
2015-18 Sportsman 1000
2013-18 Scrambler 850
2014-18 Scrambler 1000
Replaces Polaris part number 7518466, 5137346, and 7547313
$16.95$15.26Scrambler REAR/ FRONT A-Arm Bolt, Nut, Washer Kit
$16.95$15.26 -
Scrambler XP Ball Joint Install & Removal Tool
Replacing the ball joints from the a-arms on most Polaris machines can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel tool set is designed to both remove and install the ball joint using any standard shop press without damaging the a-arm or ball joint.
The kit starts with our holder tool. This uniquely sized tube is welded to a nice baseplate for a secure footprint. The holder tool fits perfectly in the groove of the a-arm around the balljoint. Simply set the a-arm in place over the holder tool and press the old ball joint out. It will drop out of the a-arm and into the holder tool.
To install the new balljoints simply flip the a-arm over on the holding tool, put the new balljoint in place, use the install tool on top of the balljoint, and press into place. The install tool pushes against the edge of the balljoint so you do not dimple or damage the center. Very simple and no damage to paint or powdercoat.
Both tools are zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
2013-21 Scrambler 850
2014-19 Scrambler 1000Works with Polaris Part Number: 7061220, 7061187, 7081505, 7081580, and 7081666
$39.95$35.96Scrambler XP Ball Joint Install & Removal Tool
$39.95$35.96 -
Scrambler XP BILLET Front Storage Rack Latch
We designed our own 6061 billet aluminum latch assembly for the newer Sportsman and Scrambler front racks. This latch is virtually unbreakable and looks amazing on the machine. Get rid of those flimsy stock plastic latches that break! Both the latch and the shaft are billet aluminum in this assembly. A black anodized finish with an engraved Quad Logic logo looks awesome. We use a strong shoulder bolt to hold the two together and we also include a new spacer and bushing for a complete installation! Installs and works just like the original. Replaces Polaris part numbers 5438117, 5438118, 5413887, 5521796.
Sold each so order two if replacing both latches.
Fits the following models:
2013-21 Scrambler 850
2014-21 Scrambler 1000Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$29.95$26.96Scrambler XP BILLET Front Storage Rack Latch
$29.95$26.96 -
Scrambler XP Billet Pinion Cover Assembly
Leaking seals and worn out bearings in the front differential cover on your Sportsman or Scrambler 1000? Replace the whole assembly with this billet aluminum cover. This quality replacement kit includes the custom machined differential cover, brand new bearing and seal already pressed in and ready to install. This aluminum cover is a new and improved replacement of Polaris part number(s): 3236143 & 3235438. This product fits the 2013-21 Sportsman and Scrambler 850 and 1000 models as well as several other Polaris applications. Be sure to check out Quad Logic for all your replacement part needs!
Fits the following models:
2013-21 Scrambler 850
2014-21 Scrambler 1000
Replaces Polaris part number 3236143 & 3235438
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$99.95$89.96Scrambler XP Billet Pinion Cover Assembly
$99.95$89.96 -
Scrambler XP Front Rear Brake Pads
Our new semi metallic pads for the Polaris Sportsman and Scrambler’s are the best of both worlds. They are designed to offer the best compromise between stopping power and pad life. These pads offer great braking feel with a higher coefficient of friction. These are the perfect pads for hard riding in all conditions. Sold as a pair for one wheel. Replaces part number: 2203628. THESE WILL FIT FRONT OR REAR CALIPERS. Fits the following Polaris models:
2013-20 Scrambler 850
2014-18 Scrambler 1000
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$14.95$13.46Scrambler XP Front Rear Brake Pads
$14.95$13.46 -
Scrambler XP Hayes Front Master Cylinder Cover
Genuine Hayes replacement hand brake reservoir cover kit. Includes the aluminum cover, rubber sealing gasket and a new sight glass. Ready to bolt on! Will work great on just about any 2007-19 Sportsman, Scrambler, or Hawkeye model using the stock Hayes master cylinder. Replaces Polaris part number 2203055.
2013-17 Scrambler 850-1000
Replaces Polaris part Numbers: 2203055
$39.95$35.96Scrambler XP Hayes Front Master Cylinder Cover
$39.95$35.96 -
Scrambler XP Oil Level Dipstick Gauge and O-Ring
New replacement oil level dipstick for your Sportsman or Scrambler 850/1000. Exact replacement and includes the sealing o-ring. Replaces Polaris 2521028 and 5412530. Fits the following models:
2013-21 Scrambler 850
2014-21 Scrambler 1000
Replaces Polaris part numbers: 3089996 and 2520799
$14.95$13.46Scrambler XP Oil Level Dipstick Gauge and O-Ring
$14.95$13.46
