• Ranger 1000 SPLYT Technology Stator and Voltage Regulator Kits

    The stock RZR 1000 voltage regulators are terrible. They are a known problem and can easily burn out from excess heat, especially when using high amperage accessories. Do not replace it with another OEM unit! SPLYT Technology provides a reliable solution to well-known charging system failures. Using a dual output stator with two completely separate stator windings, this system splits the power generated by the stator into two separate voltage regulators. These regulators then each operate with only half of the load of the original system, allowing them to maintain a lower temperature and increase reliability.

    For people with large subs or light bars there is also the kit with an upgraded flywheel. This charging upgrade provides a tremendous 900W output to allow you to install accessories without draining the original battery nor installing a secondary battery. This upgrade installs seamlessly freeing the space a second battery would take on your ride.  Replaces Polaris part number 4014029, 4013247, 4013904, 4014029, 4016868, 4014856, and 4015229.

    Fits all 2017-18 Ranger 1000

    Replaces Polaris Part Numbers: 4014029, 4013247, 4013904, 4014029, 4016868, 4014856, and 4015229

    $499.95$649.95
    $449.96$584.96
  • Ranger 1000 Valve Cover Bolts

    New replacement engine valve cover shoulder bolts for your Polaris ATV or UTV. Exact replacement bolts to the original. Replaces Polaris 7519165. Sold EACH or FOUR. Fits the following models and more:

    2017-20 Ranger 1000

    Replaces Polaris Part Number: 7519165

    $8.95$22.95
    $8.06$20.66

    Ranger 1000 Valve Cover Bolts

    $8.95$22.95
    $8.06$20.66
  • Ranger 1000 Valve Spring Seal

    New replacement engine valve stem seal. Steel shell with Viton seal. Exact replacement seal to the original. Replaces Polaris 3610212 and 3610199. Single cylinder models use 4 per engine while twin cylinder models use 8 per engine.

    Fits the following models and more:

    2018 Ranger 1000

    Replaces Polaris Part Numbers: 3610212 and 3610199

    $7.95$24.95
    $7.16$22.46

    Ranger 1000 Valve Spring Seal

    $7.95$24.95
    $7.16$22.46
  • Ranger 1000 XP Cylinder Head Bolts

    New replacement engine cylinder head bolts. Exact replacement 10.9 bolts including new washers. Size is M11 x 1.25 x 150mm. Replace these bolts whenever servicing the engine to ensure proper torque. Replaces Polaris 7519123. Sold Each or as a set of SIX.

    Fits the following models and more:

    2018-20 Ranger 1000 XP (All models)

    Exact replacement for Polaris 7519123

    $9.95$29.95
    $8.96$26.96

    Ranger 1000 XP Cylinder Head Bolts

    $9.95$29.95
    $8.96$26.96
  • Ranger 400 500 Engine Motor Mounts

    This is an OEM grade replacement rubber engine motor mount for your Polaris. Exact dimensions and durometer as the original.    Choose your mounts from the drop down below.  Sold EACH.

    These mounts fit the following:

    2010-14 Ranger 400 Series 10 and 11 Ranger 500 
    2004-13 Ranger 500 (All) 

    Replaces Polaris part number 3022076, 3110044, 3021936, 3021119, and 3022071.

    $17.95$64.95
    $16.16$58.46

    Ranger 400 500 Engine Motor Mounts

    $17.95$64.95
    $16.16$58.46
  • Ranger 500 Driveline Isolator Mount

    New replacement Driveline Isolator Mount. This is an exact OE replacement and will mount the same as the OE mounts.  Sold EACH or as a PAIR.

    FITS THE FOLLOWING MODEL(S):

    2017-’22 RANGER 500

     

    REPLACES POLARIS PART NUMBER(S): 1332955

    $49.95$98.95
    $44.96$89.06

    Ranger 500 Driveline Isolator Mount

    $49.95$98.95
    $44.96$89.06
  • Ranger 500 Head Bolts

    Replacement Head Bolts are a must have when rebuilding your Polaris 570 motor. These Quality bolts from Quad Logic are exact replacements for Polaris Part number 7520144. Replacing your head bolts will ensure that the cylinder head stay tight and torqued to spec.

    Fits the following models;

    2019-22 Ranger 500

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $9.95$29.95
    $8.96$26.96

    Ranger 500 Head Bolts

    $9.95$29.95
    $8.96$26.96
  • Ranger 500 M10 x 1.25 x 40mm Hex Screw

    Replacement Polaris Hex Screws.  Screws are M10 x 1.25 x 40mm. These Screws are commonly used on the engine mounting brackets and chassis.  Sold in a pack of 2, 4 or 8.

    FITS THE FOLLOWING MODEL(S):

    2017-’22 RANGER 500


    REPLACES POLARIS PART NUMBER(S): 7519332

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $7.95$19.95
    $7.16$17.96

    Ranger 500 M10 x 1.25 x 40mm Hex Screw

    $7.95$19.95
    $7.16$17.96
  • Ranger 500 M8 Screw

    Direct replacement Polaris Ace M8 screws. These screws are used in several late model applications around Polaris ATV and side by sides. These are direct replacement for Polaris part number 7516734.  Applications are listed below. Please check that these are the correct screws you are needing by verifying the OE number(s).

    Select either a pack of 2 screws or a 4 pack from the dropdown bar.

    FITS THE FOLLOWING MODEL(S):

    2017-’22 RANGER 500


    REPLACES POLARIS PART NUMBER(S): 7516734

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $7.95$9.95
    $7.16$8.96
    100-4561-2-PIC2-Polaris-ATV-8M-Screw-with-Loctite-Patch-7516734 100-4561-4-Polaris-ATV-8M-Screw-with-Loctite-Patch-4-PACK-7516734

    Ranger 500 M8 Screw

    $7.95$9.95
    $7.16$8.96
  • Ranger 500 Throttle Body to Intake Manifold Boot CLAMP

    Replacing the clamps on critical engine components is always a great idea! This clamp is specifically designed to clamp the throttle body into the intake manifold on many Polaris models. Maintaining at tight seal is very important to ensure no leaks causing the engine to run lean. This is a direct replacement for Polaris Part number 7081623. Please check with the Polaris parts diagrams to ensure proper fitment.  Sold as EACH or a PAIR.

    Fits the following Models:
     
    2017-22 Ranger 500
    Replaces Polaris Part number 7081623

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $6.95$9.95
    $6.26$8.96
  • Ranger 570 Cylinder Head Bolts

    New replacement engine cylinder head bolts. Exact replacement 10.9 bolts including new washers. Size is M11 x 1.25 x 150mm. Replace these bolts whenever servicing the engine to ensure proper torque. Replaces Polaris 7519123. Sold Each or as a set of SIX. Fits the following models and more:

    2014-15 Ranger 570

    Exact replacement for Polaris 7519123

    $9.95$29.95
    $8.96$26.96

    Ranger 570 Cylinder Head Bolts

    $9.95$29.95
    $8.96$26.96
  • Ranger 570 Driveline Isolator Mount

    New replacement Driveline Isolator Mount. This is an exact OE replacement and will mount the same as the OE mounts.  Sold EACH or as a PAIR.

    FITS THE FOLLOWING MODEL(S):

    2014-’23 RANGER 570
    2014-’23 RANGER CREW 570

     

     

    REPLACES POLARIS PART NUMBER(S): 1332955

    $49.95$98.95
    $44.96$89.06

    Ranger 570 Driveline Isolator Mount

    $49.95$98.95
    $44.96$89.06
  • Ranger 570 Head Bolts

    Replacement Head Bolts are a must have when rebuilding your Polaris 570 motor. These Quality bolts from Quad Logic are exact replacements for Polaris Part number 7520144. Replacing your head bolts will ensure that the cylinder head stay tight and torqued to spec.

    Fits the following models;

    2016-24 Ranger 570

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $9.95$29.95
    $8.96$26.96

    Ranger 570 Head Bolts

    $9.95$29.95
    $8.96$26.96
  • Ranger 570 M10 x 1.25 x 40mm Hex Screw

    Replacement Polaris Hex Screws.  Screws are M10 x 1.25 x 40mm. These Screws are commonly used on the engine mounting brackets and chassis.  Sold in a pack of 2, 4 or 8.

    FITS THE FOLLOWING MODEL(S):

    2014-’23 RANGER 570
    2014-’23 RANGER CREW 570


    REPLACES POLARIS PART NUMBER(S): 7519332

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $7.95$19.95
    $7.16$17.96

    Ranger 570 M10 x 1.25 x 40mm Hex Screw

    $7.95$19.95
    $7.16$17.96
  • Ranger 570 Piston Kit

    Top quality Namura piston kit for your 570 4-stroke Polaris. Features include machined smooth crowns, teflon/moly coated skirts, and a high silicon content. For use with all stock or modified motors. Includes piston, rings, pin, and circlips. Sold Each. Replaces Polaris 2204960 and 2204732

    This piston and gasket kit fits the following models:

    2014-18 Ranger 570

    Replaces Polaris Part Numbers: 2204960 and 2204732

     

    $116.95
    $105.26

    Ranger 570 Piston Kit

    $116.95
    $105.26
  • Ranger 570 Spark Plug Cap & Wire

    A misfiring engine or loss of spark could simply be a bad spark plug cap.  Replace it quickly and easily with this cap and wire assembly.  The coil wire will simply snap onto your original coil and you are back in business. This wire is sold EACH or as a PAIR but will fit either PTO or MAG side.  Replaces Polaris part numbers 4012990, 4012991, 4014032, 4014033, 4017692, 4017693.  Fits the following models:

    2014             Ranger 570 EFI

    2014-15        Ranger CREW 570 EFI

    Replaces Polaris part Numbers: 4012990, 4012991, 4014032, 4014033, 4017692, 4017693

    $17.95$29.95
    $16.16$26.96

    Ranger 570 Spark Plug Cap & Wire

    $17.95$29.95
    $16.16$26.96

Main Menu