-
Trailblazer/Trailboss 250 Top End Gasket Kit
Kit includes head, base, and exhaust gasket to rebuild the top end of your Polaris 250. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following top end gaskets shown in the photo including:
Head Gasket
Base Gasket
Exhaust GasketThis gasket kit fits the following models:
1990-2006 Trailblazer 250
1989-92 Trailboss 250
1989-92 Big Boss 250
2000-02 Xplorer 250
$24.95$22.46Trailblazer/Trailboss 250 Top End Gasket Kit
$24.95$22.46 -
Trailblazer Secondary Clutch Puller
The secondary clutch is supposed to slide right off the shaft. However, if neglected, the clutch will be rusted onto the shaft and you simply cannot get it off without this puller. Hardened steel puller is plated for corrosion resistance. 5.5″ overall length. Same as Polaris part number 2870913.
Fits all 1990-2013 Trailblazer 250/330/400 modelsSame as Polaris part number 2870913.
$24.95$22.46Trailblazer Secondary Clutch Puller
$24.95$22.46 -
Trailblazer Primary Clutch Puller
Brand new primary clutch puller for almost all 1985 and newer Polaris ATV’s and UTV’s using the P85 primary clutch. Hardened steel puller is plated for corrosion resistance. 10.25″ overall length and 3/4″-16 threads. Be sure to use a dab of grease on the end of the puller and threads to properly pull the clutch. Same as Polaris part number 2870506.
Fits all 1990-2013 Trailblazer 250/330/400 models
Same as Polaris part number 2870506.
$24.95$22.46Trailblazer Primary Clutch Puller
$24.95$22.46 -
Trailblazer Primary Clutch Bolt and Washers
Brand new primary clutch bolt and washers for many single cylinder Polaris ATV and UTV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5210748, 7512566, and 7575202. Includes one clutch bolt, one thick flat washer, and one star type washer. Fits the following models and more:
1990-2006 Trailblazer 250
2008-13 Trailblazer 330
Replaces Polaris Part Number: 5210748, 7512566, and 7575202
$8.95$8.06Trailblazer Primary Clutch Bolt and Washers
$8.95$8.06 -
Trailblazer Gates G-Force Workhorse Drive Belt
Quad Logic is now a Gates distributor for all your Polaris ATV and UTV belt needs! These belts are tried and true, torture tested for years. We trust them on all our machines and so should you. They are a much better value than the OEM Polaris belts but probably exceed the performance at the same time. This G-Series Workhorse belt is a perfect replacement and /or performance belt for your machine. The top cogs offer better cooling and the aramid cords make it extremely strong. The Gates G-Force Workhorse 20G4022 has increased strength and reliability. Replaces Polaris part number 3211077.
- Up to 2x the life of the G-Force Belt.
- 45% increased heat tolerance.
- Power for hauling heavy loads across aggressive terrain
- Improved durability, crack & wear-resistance.
FITS THE FOLLOWING MODEL(S):
1992-’13 Trailblazer 250/330/400’sREPLACES POLARIS PART NUMBER(S) 3211077 and 3211048
$84.95$76.46Trailblazer Gates G-Force Workhorse Drive Belt
$84.95$76.46 -
Trailblazer Clutch Intake/Outlet Tube Rubber Boot
Brand new clutch air intake boot. Replace that old dried out cracked one with this new one. Depending upon the year this boot fits between the front of the engine/clutch inlet to the vertical plastic clutch inlet tube and/or the clutch cover outlet tube. Replaces Polaris part number # 5410421.
Fits the 1990-03 Trailblazer 250’s.
$14.95$13.46Trailblazer Clutch Intake/Outlet Tube Rubber Boot
$14.95$13.46 -
Trailblazer Carburetor Needle & Seat
New replacement 2.5 needle and seat for your Polaris ATV carburetor. Includes a new viton tipped needle and brass seat. Installs just like stock to get your fuel flowing properly again. Replaces Polaris part number 3130360. Fits the following Polaris two stroke ATV’s and more:
1990-01 Trailblazer1985-99 Trail Boss1993-95 250/300/350L models1996-97 Sport 4001996-01 Xplorer 250/3001996-99 Xpress 300/4001993-95 250/300/350L modelsReplaces Polaris part number 3130360
$19.95$17.96Trailblazer Carburetor Needle & Seat
$19.95$17.96 -
Trailblazer 250 Rear Brake Pads
OEM quality pads but at an incredible value. Our new semi metallic REAR brake pads for the Polaris ATV’s are the best of both worlds. They are designed to offer the best compromise between stopping power and pad life. These pads offer great braking feel with a higher coefficient of friction. These are the perfect pads for hard riding in all conditions. Sold as a pair for one caliper.
Fit the following:
1990-’98 TRAIL BLAZER 250 $14.95$13.46Trailblazer 250 Rear Brake Pads
$14.95$13.46 -
Trailblazer 250 Primary Clutch Rebuild Kit
This is a rebuild kit for the spider and sheave on many Polaris ATV primary clutches. Includes everything shown in the picture such as the pins, narrow style rollers, shims, buttons, clutch cover bushing and movable sheave bushing. What is NOT included is the spring, weights, and any other components not shown. Allows you to completely rebuild your worn out spider with a very cost effective kit. Exact replacement parts for Polaris part numbers 3576504, 1321457, 5430945, 5020422, 3576510 and 5431936.
Fits all 1990-2006 Trailblazer 250 and 2008-13 Trailblazer 330 models.
$89.95$80.96Trailblazer 250 Primary Clutch Rebuild Kit
$89.95$80.96 -
Trail Blazer 250 Magneto Stator
Complete replacement stator for your Polaris ATV. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part # 3083979. Fits following models listed below.
1990-2006 Trail Blazer 250
Replaces Polaris Part Number: 3083979
$199.95$179.96Trail Blazer 250 Magneto Stator
$199.95$179.96 -
Trail Blazer 250 Complete Engine Gasket Set with Seals
Trail Blazer 250 Complete Engine Gasket Set with Seals includes all the gaskets and seals to completely rebuild the engine of your Polaris 250 two stroke. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following gaskets and seals shown in the photo including:
- Head Gasket
- Base Gasket
- Intake Boot O-ring
- Exhaust Gasket
- Starter Gasket
- PTO Oil Seal
- Mag Oil Seal
This gasket kit fits the following models:
1990-2006 Trailblazer 250
1989-92 Trailboss 250
1989-92 Big Boss 250
2000-02 Xplorer 250
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.$24.95$22.46Trail Blazer 250 Complete Engine Gasket Set with Seals
$24.95$22.46 -
Trail Blazer 250 (1990-2006) Carburetor Intake Adapter Boot
Brand new intake manifold for the Polaris Trail Blazer 250 motors. A cracked or leaking intake manifold will cause a lean condition and engine damage if not corrected. Get it back running like new again with this new direct replacement intake boot by Quad Logic.
FITS THE FOLLOWING MODEL(S):1990-’06 TRAIL BLAZER 250 1993 250 1994-’95 300 1989-’92 BIG BOSS 250 1985-’86 SCRAMBLER 250 1996-’97 SPORT 400L 1985-’99 TRAIL BOSS 250 1996-’02 XPLORER 300 1996-’99 XPRESS 300 1996-’97 XPRESS 400 USED ON CAN-AM PART NUMBER(S): 3085013 and 3083412
$17.95$16.16 -
Sportsman 500 Primary Clutch Weight Bolt and Nut Kit
Brand new primary clutch weight shoulder bolt and nut kit for many older Polaris ATV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 7512266 and 7541906. Includes three bolt’s and three nut’s. Fits the following models and more:
1994-98 Sport 400L
1993-96 Sportsman
1999-00 Sportsman 335
1997 Sportsman 400L
2001-05 Sportsman 400
2006 Sportsman 450
1996-07 Sportsman 500
Replaces Polaris Part Number: 7512266 and 7541906
$19.95$17.96Sportsman 500 Primary Clutch Weight Bolt and Nut Kit
$19.95$17.96 -
Sportsman 500 Front Ball Joint Puller Removal Tool
Pulling the ball joints from the aluminum strut housing on most Polaris ATV’s can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel puller simply goes over the balljoint, install the nut, and turn out the inner puller to remove the ball joint. A 6 point 1″ socket is required. Zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
Unlike other tools on the market that use all of the old ball joints threads, this tool only uses the top few threads of the ball joint. If your threads are damaged, those other pullers will not work! Even in your threads are damaged you can normally still make our puller work due to the dual puller design. Does the balljoint spin freely or slop up and down in its housing? No problem, this puller will easily remove it! Complete instructions are included.
This puller can be used on almost any Polaris ATV or UTV with the strut style front suspension from about 1985 to current.
You can view a video of the puller in action on Youtube here, just copy and past the URL into your browser:
https://youtu.be/NgGPTWaG5Q0
$39.95$35.96Sportsman 500 Front Ball Joint Puller Removal Tool
$39.95$35.96 -
Sportsman 400L Water Pump Seal
We developed these seals to be exact replacements to the original. This water pump seal is the INNER of the two water pump seals. Replaces Polaris part # 3084184. Fits the following models and more:
1995-02 Scrambler 400
1994-98 Sport 400
1995-02 Xplorer 400
1996-97 Xpress 300/400
1990-95 Trail Boss 350L
1993-97 Sportsman 400L
1995-97 Big Boss 400L
Replaces Polaris part #3084184.
$11.95$10.76Sportsman 400L Water Pump Seal
$11.95$10.76 -
Sportsman 400L Fuel Tank Cap with Gauge
Know if it is time to fill up with the replacement fuel tank cap with gauge from Quad Logic! This replacement fuel cap will work on your Polaris Sportsman , Magnum, Trail Blazer as well as other later Polaris models.
Fits the following models:
1993-’97 Sportsman 400L 4×4
Replaces Polaris part number 2873626, 2871442 and 2511222.
$19.95$17.96Sportsman 400L Fuel Tank Cap with Gauge
$19.95$17.96
- HOME
- Quad-Logic ATV Parts
- POLARIS RZR PARTS AND ACCESSORIES
- Polaris RZR 570 Parts and Accessories
- Polaris RZR 800 Parts and Accessories
- Polaris RZR 900 XP Parts and Accessories
- Polaris RZR 1000 XP Parts and Accessories
- Polaris RZR 1000 S Parts and Accessories
- Polaris RZR 900 Trail/XC/S Parts and Accessories
- RS1 Parts and Accessories
- RZR PRO XP
- Polaris RZR Turbo Parts and Accessories
- POLARIS RANGER PARTS AND ACCESSORIES
- POLARIS ATV PARTS AND ACCESSORIES
- Sportsman 400
- Polaris Sportsman 500 Parts and Accessories
- Polaris Sportsman 570 Parts and Accessories
- Polaris Sportsman 600 Parts and Accessories
- Polaris Sportsman 700 Parts and Accessories
- Polaris Sportsman 800 Parts and Accessories
- Polaris Sportsman 550/850/1000 XP Parts and Accessories
- Polaris Scrambler 500 Parts and Accessories
- Polaris Scrambler 850/1000 Parts and Accessories
- Polaris Trailblazer Parts and Accessories
- Polaris Magnum Parts and Accessories
- Polaris Ace Parts and Accessories
- CAN-AM PARTS AND ACCESSORIES
- POLARIS RZR PARTS AND ACCESSORIES
- ATV
- UTV
- SNOWMOBILE
- MOTORCYCLE
- LAWN & GARDEN
- Small Engine Parts
- 50% OFF PRODUCTS
- Checkout
