-
Sportsman 850/1000 Rear Bumper
NEW Sportsman 850/1000 Rear Bumper! This rugged rear bumper designed exclusively for the 2017-2024 Polaris Sportsman 850/1000. Crafted from durable metal and finished with a sleek black powder coating, this bumper not only enhances the aesthetic appeal of your vehicle but also provides unmatched protection for your rear taillights and plastics.
Unlike the stock bumper, Quad Logic’s rear bumper boasts a larger size and heavy-duty construction, ensuring superior defense against impacts and rough terrain. Engineered with precision, it seamlessly integrates with your Sportsman, offering a snug fit and a seamless appearance. Includes mounting bolts, nuts and installation instructions.
FITS THE FOLLOWING MODEL(S):
2017-’24 SPORTSMAN 850/1000 (*Fits all models except high lifter and touring)
$119.95$107.96Sportsman 850/1000 Rear Bumper
$119.95$107.96 -
Sportsman 570 Throttle Body Intake Adapter Boot
Brand new intake manifold for the Polaris Sportsman 570. A cracked or leaking intake manifold will cause a lean condition and engine damage if not corrected. Get it back running like new again with this new direct replacement intake boot by Quad Logic. DOES NOT WORK ON EUROPEAN MODELS!
FITS THE FOLLOWING MODELS:
2014-’23 SPORTSMAN 570 2014-’23 SPORTSMAN TOURING 570 (Does NOT fit Ranger 570)
REPLACES POLARIS PART NUMBER(S): 5415524 and 5414598
$34.95$31.46Sportsman 570 Throttle Body Intake Adapter Boot
$34.95$31.46 -
Sportsman 570 STEEL Footwell Floorboards
You’ve asked for them and now they are ready! Following our popular older Style sportsman steel footwells, these are the new Sportsman 450/570 footwells! The fit and finish is fantastic on these footwells, the lines match perfectly and they look like OEM equipment. These floorboards are manufactured from lasered sheet steel then formed to fit the contour of your fenders. We even put tabs on the backside to hold your plastic in place. We even kept the nice foot pegs that run from side to side! Lastly they are finished in a beautiful black texture powder coat for a long lasting finish. This special powder coat is VERY grippy, it feels like grip tape so your boots will not slide around in the floorboards. Plastic does not belong on an ATV! Fix yours for good with these new steel footwells. Fits similar to stock, you can re-use most the original hardware and we add some hardware to finish it off. Includes both Left and Right floorboards.
Fits all 2014-’24 standard chassis Sportsman 450 and 570 including EPS and SP models.
Replaces Polaris Part Numbers: 5450523-070 and 5450524-070.
$359.95$323.96Sportsman 570 STEEL Footwell Floorboards
$359.95$323.96 -
Sportsman 570 Stage 1 Engine Tune Up Kit
If your machine is not running up to its potential, this kit is for you. This Stage 1 kit includes a new air filter, pre-filter, oil filter, and spark plug. These simple to replace components can make a huge improvement in a machine that has been maintenance neglected. These filters are excellent quality replacements and Quad Logic approved. The spark plug is a genuine NGK plug matched for your Sportsman 570. Works on all 2014-23 Sportsman 570 models.
This kit includes:
– Air Filter
– Water Resistant Pre-filter for the air filter.
– Oil Filter
– NGK Spark Plug (MR7F)Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$49.95$44.96Sportsman 570 Stage 1 Engine Tune Up Kit
$49.95$44.96 -
Sportsman 570 Rear Bumper
NEW Sportsman 570 Rear Bumper! This rugged rear bumper designed exclusively for the 2021-2024 Polaris Sportsman 570. Crafted from durable metal and finished with a sleek black powder coating, this bumper not only enhances the aesthetic appeal of your vehicle but also provides unmatched protection for your rear taillights and plastics.
Unlike the stock bumper, Quad Logic’s rear bumper boasts a larger size and heavy-duty construction, ensuring superior defense against impacts and rough terrain. Engineered with precision, it seamlessly integrates with your Sportsman, offering a snug fit and a seamless appearance. Includes mounting bolts, nuts and installation instructions.
FITS THE FOLLOWING MODEL(S):
2021-’24 SPORTSMAN 450
2021-’24 SPORTSMAN 570(*Fits all models except 6×6, X2 and Touring)
$124.95$112.46Sportsman 570 Rear Bumper
$124.95$112.46 -
Sportsman 570 Rear Bearing Carrier Bushing
We expertly machined these bearing carrier bushings to be a perfect fit. They are made of a heavy grade steel, machined inside and out, then zinc plated for corrosion resistance. These bushing look way better than the OEM ones, you can see the quality difference! The size is 1.20″ diameter, 1.90″ long and has a hole for the stock 7/16″ bolt. These are also made right here in the USA. These are located on either side of the rear bearing carrier where the lower a-arm attaches. There are two per side and four total on the machine. These are sold EACH so please order how ever many you need. This replaces Polaris part number 5631142 and 5632291.
2014-24 Sportsman 570 (Includes Touring and X2)
Replaces Polaris part Numbers: 5631142 and 5632291
$19.95$17.96Sportsman 570 Rear Bearing Carrier Bushing
$19.95$17.96 -
Sportsman 570 REAR Bearing Carrier Bolt, Bushing, Washer Kit
Brand new rear a-arm bolt kit for many Polaris ATV’s. Brand new high quality bolt, washer, and nut for many Polaris machines that are exactly the same as the original! This replaces Polaris part number 5632291, 7555740, 7552614, and 7517873. Fits the following models and more:
2014-23 Sportsman 570 (Includes Touring and X2)
Replaces Polaris Part Number: 5632291, 7555740, 7552614, and 7517873
$22.95$20.66 -
Sportsman 570 Hall Effect Speed Sensor
This exact replacement speed sensor is made by the original manufacturer for Polaris. Trust this speed sensor to work perfectly and last for years in demanding conditions. Located on the rear gearcase, it installs just like the original, no modifications required. O-ring not included. Replaces Polaris part number 4012167, 3234299, 3234508 and 4013908.
FITS THE FOLLOWING MODEL(S):
2016-’24 Sportsman 450 HO
2014-’24 Sportsman 570 (All Models)
REPLACES POLARIS PART NUMBER(S): 4012167, 3234299, 3234508 and 4013908.
$49.95$44.96Sportsman 570 Hall Effect Speed Sensor
$49.95$44.96 -
Sportsman 570 Complete Primary Drive Clutch
Brand new aftermarket drive clutch for your Sportsman 570. These complete clutches have a host of features that make it a much better alternative to the expensive OEM clutches. Some of the features include:
- Complete assembled clutch (Spring and weights are included)
- Every clutch is factory balanced to ensure they turn straight and true
- Aluminum and magnesium construction is strong and light weight
- Heat treated center shaft for unequaled strength
- Larger diameter spider buttons have more contact area and will wear out less quickly
- Uses the same clutch puller as the OEM clutch
- Uses the original clutch bolt and washers for installation
- Accepts any brand of drive belt
- Replaces Polaris part number 1323063
FITS THE FOLLOWING MODEL(S):
2014-’20 Sportsman 570 (All EBS Models)
2014-’23 Sportsman 570 (Touring, X2 & 6×6)
2015-’19 Sportsman 570 SPREPLACES POLARIS PART NUMBER(S): 1323063 & 1323543
$229.95$206.96Sportsman 570 Complete Primary Drive Clutch
$229.95$206.96 -
Sportsman 500 Front Ball Joint Puller Removal Tool
Pulling the ball joints from the aluminum strut housing on most Polaris ATV’s can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel puller simply goes over the balljoint, install the nut, and turn out the inner puller to remove the ball joint. A 6 point 1″ socket is required. Zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
Unlike other tools on the market that use all of the old ball joints threads, this tool only uses the top few threads of the ball joint. If your threads are damaged, those other pullers will not work! Even in your threads are damaged you can normally still make our puller work due to the dual puller design. Does the balljoint spin freely or slop up and down in its housing? No problem, this puller will easily remove it! Complete instructions are included.
This puller can be used on almost any Polaris ATV or UTV with the strut style front suspension from about 1985 to current.
You can view a video of the puller in action on Youtube here, just copy and past the URL into your browser:
https://youtu.be/NgGPTWaG5Q0
$39.95$35.96Sportsman 500 Front Ball Joint Puller Removal Tool
$39.95$35.96 -
Scrambler 850 /1000 Billet Aluminum Oil Level Dipstick and O-Ring
New replacement BILLET ALUMINUM Oil Level Dipstick for your Sportsman or Scrambler 850/1000. Exact replacement and includes the sealing O-ring. Replaces Polaris 2521028 and 5412530.
FITS THE FOLLOWING MODEL(S):
2014-’23 SCRAMBLER XP 1000 2013-’23 SCRAMBLER 850 REPLACES POLARIS PART NUMBER(S): 2521028 and 5412530.
$34.95$31.46 -
RZR Turbo T-Map Pigtail Harness Repair Kit
The wire harness to the T-map sensor is a well known issue on Polaris EFI machines. It will vibrate over time and break the wires either internally or externally and can be hard to diagnose. Many times it will throw a code but not always. Fix it now with our own version of the Polaris harness repair kit. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail. Our pigtail fits perfectly to the Polaris 2413095 T-map Sensor.
FITS THE FOLLOWING MODEL(S):
2019 RZR TURBO 4
2020 RZR TURBO PRO XP LT
2022-24 RZR TURBO R 4|
2022-24 RZR TURBO R
2020-21 RZR TURBO S
2020-21 RZR TURBO S 4
2016-21 RZR XP 4 TURBO
2016-21 RZR XP TURBO
2018-19 RZR XP TURBO S
2019 RZR XP4 TURBO S$19.95$17.96RZR Turbo T-Map Pigtail Harness Repair Kit
$19.95$17.96 -
RZR Turbo Solenoid Boost Valve
Replacement Solenoid Boost Valve for the Polaris RZR Pro XP and RZR Turbos. Our 2 terminal boost valve is a direct replacement and will meet or exceed OE quality. Length: 71 mm
Width: 38 mm, Height: 28 mmFITS THE FOLLOWING MODEL(S):
2022-’24 RZR TURBO R 2022-’24 RZR TURBO R 4 2020-’21 RZR TURBO S 2020-’21 RZR TURBO S 4 2016-’21 RZR XP 2016-’21 RZR XP 4 REPLACES POLARIS PART NUMBER(S): 4011285
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$99.95$89.96RZR Turbo Solenoid Boost Valve
$99.95$89.96 -
RZR Turbo EFI Bosch 3 BAR T-Map Sensor
Brand new genuine Bosch T-map sensor for Polaris RZR Turbo. A dirty or bad T-map can cause rough or inconsistent idle, stalling, or just overall poor performance. Replace it now with this genuine Bosch unit from Quad Logic. Replaces the Bosch 0261230416 part number sensor. The Polaris part numbers is 2413095. There are TWO of these t-map sensors on the RZR turbo so order two if replacing both. These are located on the intake manifold and the charge tube. It is NOT the t-map located in the air intake duct, although we do have that sensor available as well. Fits the following models and more:
2023 RZR 74 T MP RCR
2023 RZR 74 T RCR
2020 RZR PRO XP
2020-24 RZR PRO XP 4
2021-24 RZR PRO XP DELUXE
2019 RZR TURBO 4
2020 RZR TURBO PRO XP LT
2022-24 RZR TURBO R 4
2022-24 RZR TURBO R
2020-21 RZR TURBO S
2020-21 RZR TURBO S 4
2016-21 RZR XP 4 TURBO
2016-21 RZR XP TURBO
2018-19 RZR XP TURBO S
2019 RZR XP4 TURBO S
Replaces Polaris Part Number: 2413095
$54.95$49.46RZR Turbo EFI Bosch 3 BAR T-Map Sensor
$54.95$49.46 -
RZR Pro XP Pro XP4 (2020-2024) Clutch Cover Gasket
Replace your cracked or leaking clutch cover gasket with this quality replacement from Quad Logic. Replacing this gasket will keep your clutches clean and the belt dry while enjoying your Polaris RZR. This is a direct replacement for Polaris part number 5522259.
Fits the following models:
2020-24 RZR Pro XP
2020-24 RZR Pro XP4
REPLACES POLARIS PART NUMBER(S): 5522259
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$24.95$22.46RZR Pro XP Pro XP4 (2020-2024) Clutch Cover Gasket
$24.95$22.46 -
RZR Pro XP Ignition Coil Pigtail Harness
New RZR Pro XP Ignition Coil Pigtail Harness. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail. Our pigtail fits the Polaris OE: 4015017 Ignition Coil.
FITS THE FOLLOWING MODEL(S):
2022-’24 RZR PRO R 2022-’24 RZR PRO R 4 2020-’24 RZR PRO XP 2020-’24 RZR PRO XP 4 $19.95$17.96RZR Pro XP Ignition Coil Pigtail Harness
$19.95$17.96
- HOME
- Quad-Logic ATV Parts
- POLARIS RZR PARTS AND ACCESSORIES
- Polaris RZR 570 Parts and Accessories
- Polaris RZR 800 Parts and Accessories
- Polaris RZR 900 XP Parts and Accessories
- Polaris RZR 1000 XP Parts and Accessories
- Polaris RZR 1000 S Parts and Accessories
- Polaris RZR 900 Trail/XC/S Parts and Accessories
- RS1 Parts and Accessories
- RZR PRO XP
- Polaris RZR Turbo Parts and Accessories
- POLARIS RANGER PARTS AND ACCESSORIES
- POLARIS ATV PARTS AND ACCESSORIES
- Sportsman 400
- Polaris Sportsman 500 Parts and Accessories
- Polaris Sportsman 570 Parts and Accessories
- Polaris Sportsman 600 Parts and Accessories
- Polaris Sportsman 700 Parts and Accessories
- Polaris Sportsman 800 Parts and Accessories
- Polaris Sportsman 550/850/1000 XP Parts and Accessories
- Polaris Scrambler 500 Parts and Accessories
- Polaris Scrambler 850/1000 Parts and Accessories
- Polaris Trailblazer Parts and Accessories
- Polaris Magnum Parts and Accessories
- Polaris Ace Parts and Accessories
- CAN-AM PARTS AND ACCESSORIES
- POLARIS RZR PARTS AND ACCESSORIES
- ATV
- UTV
- SNOWMOBILE
- MOTORCYCLE
- LAWN & GARDEN
- Small Engine Parts
- 50% OFF PRODUCTS
- Checkout
