• Ranger 570 Starter Motor

    Replace you Polaris starter with this replacement starter from Quad Logic. These are direct replacements for Polaris part number 4014909. You can expect trouble free starting and peace of mind out on the trail with these starters. These are high quality starters and not manufactured in China. We Warranty all of our electrical components for 90 days. Fits many Polaris Sportsman, RZR, Ranger, Ace, 570 Models.

    Please check with the Polaris parts diagrams to ensure proper fitment.

    Note: (Polaris has 2 different starters for similar years and applications check the year and model before ordering)

    Fits the following models:

    2015-21 Ranger 570

    Replaces Polaris Part Number: 4014909

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

     

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

     

    Returns are subject to 15% restocking fee.
    $139.95 $125.96

    Ranger 570 Starter Motor

    $139.95 $125.96
  • Ranger 900 Accessory Frame Tube End Cap Plug Kit

    This neat plug kit finished off the unsightly open frame tubes in your Ranger. The frame tubes fill up with water and mud then start rusting out right away. These plugs simply pound into place with your hand or a rubber mallet and give that professional fit and finish look. Keep your frame tubes clean and rust free with this simple kit! Fits all Ranger 900 XP models from 2013 to current. Not sure if it also fits the Crew model as we are still looking into it. Includes FOUR frame plugs.

    $19.95 $17.96
  • Ranger 900 Shift and Gear Selector Cable

    Sticky shifting? The shift cables can wear out or break over time. This complete cable assembly will install and work just like stock. Heavy duty stainless steel housing end fittings at both ends for corrosion resistance and longevity. 104″ overall length. Replaces Polaris part number: 7081849 and 7081883. Fits the following Polaris Ranger models (Does NOT fit Crew models):

    2013-18 Brutus HD
    2017-22 Ranger 500
    2015-19 Ranger 570
    2013-19 Ranger 900 XP
    2017 Ranger 1000 XP
    2014-18 Ranger 1000 Diesel
    2015-16 Ranger ETX
    2015-17 Ranger HST

    Replacement for the Polaris Part Number: 7081849 and 7081883

    $49.95 $44.96
  • Ranger Body Panel Torx Screw and Flat Nut (Set of 6)

    Brand new flat nut used on many 2014 and newer Polaris Ranger, RZR and ACE models to mount different body panels, fender flares, plastic, etc. Exact replacement for Polaris 7547674. Black zinc plating. This is for a set of 6 flat nuts.

    Exact replacement for Polaris # 7547674

    $10.95 $9.86
  • Ranger Crew 1000 (2019-2024) Shift Cable

    Sticky shifting or excessive gear clash? The shift cables can wear out or break over time. This complete cable assembly will install and work just like stock. Heavy duty fittings at both ends for corrosion resistance and longevity. Cable OAL is 137″.

    FITS THE FOLLOWING MODEL(S):

    2020-’24  Ranger Crew 1000
    2019-’24  Ranger Crew XP 1000

    REPLACES POLARIS PART NUMBER(S): 7082528

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $49.95 $44.96
  • Ranger Side Safety Window Net Buckle Clips 2″

    Exact replacement 2″ net buckle for many 2015 and newer Rangers. This is a direct replacement from the original manufacturer. This is used on the front of the nets where it clips into the bracket on the roll cage. Just the male buckle shown is included. Many fit other years and models as well, just compare your old buckle to the photo.

    $8.95 $8.06
  • Ranger XP 1000 Secondary Clutch Bearing Bushing

    This bushing is used on secondary clutch applications as the movable sheave bushing for 2018-2020 Polaris Ranger 1000 models. This bushing is constantly moving and so it wears out quickly, replace it before it does more damage to your clutch. Made of steel with a super smooth Teflon inner coating. Size is approximately 39 mm OD x 20 mm tall. Sold Each. Exact replacement for Polaris part number 3514903.

    FITS THE FOLLOWING MODEL(S):

    2018-’20 RANGER 1000
    2020 RANGER CREW 1000
    2019-’20 RANGER CREW XP 1000
    2019-’20 RANGER XP 1000


    REPLACES POLARIS PART NUMBER(S): 3514903

    $19.95 $17.96
  • Roll Pin Punch Tool

    Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:

    Polaris ATV’s from 1993 to Current

    Polaris RZR UTV’s from 2008 to Current

    Polaris Ranger UTV’s from 2003 to Current

    $24.95 $22.46

    Roll Pin Punch Tool

    $24.95 $22.46
  • RS1 Primary Clutch Sheave Bushing

    New primary clutch moveable sheave bushing for many Polaris ATV’s and UTV’s. This bushing is constantly moving and so it wears out quickly, replace it before it does more damage to your clutch. Made of steel with a super smooth Teflon inner coating. Size is approximately 2.4″ OD x 1″ tall. Sold Each. Exact replacement for Polaris part number 3514891.

    FITS THE FOLLOWING MODEL(S):

    2018-’22 RZR RS1

    REPLACES POLARIS PART NUMBER(S): 3514891

    $24.95 $22.46
  • RZR 1000 Ball Joint Install and Removal Tool

    Replacing the ball joints from the a-arms on most Polaris machines can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel tool set is designed to both remove and install the ball joint using any standard shop press without damaging the a-arm or ball joint.

    The kit starts with our holder tool. This uniquely sized tube is welded to a nice baseplate for a secure footprint. The holder tool fits perfectly in the groove of the a-arm around the balljoint. Simply set the a-arm in place over the holder tool and press the old ball joint out. It will drop out of the a-arm and into the holder tool.

    To install the new balljoints simply flip the a-arm over on the holding tool, put the new balljoint in place, use the install tool on top of the balljoint, and press into place. The install tool pushes against the edge of the balljoint so you do not dimple or damage the center. Very simple and no damage to paint or powdercoat.

    Both tools are zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.

    WILL NOT WORK WITH NEW OEM POLARIS BALLJOINT PART #7082422

    2014-20 RZR 1000 XP (All models)

    Work with Polaris Part Number: 7061220, 7061187, 7081505, 7081580, and 7081666
    $44.95 $40.46
  • RZR 1000 Exhaust Gasket

    This double spherical exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite.  It is designed to perform even better than the stock Polaris gasket. This gasket is located between the main exhaust pipe and the muffler.  Size is approximately 2.5″ ID by 3.25″ OD.  Sold each.  Fits the following RZR models:

    2015-21 RZR 1000 and RZR-4 1000  (Does not fit 60″ models)

    Replaces Polaris part number: 3610236

    $24.95 $22.46

    RZR 1000 Exhaust Gasket

    $24.95 $22.46
  • RZR 1000 Gearcase Triple Lip Oil Seal

    Brand new replacement triple lip steel and viton gearcase seal for many Polaris models. Replaces Polaris # 3235495. Fits the following Polaris models and more:

    2014-21 RZR 1000

    Replaces Polaris Part Numbers: 3235495

     

    $21.95 $19.76
  • RZR 1000 Intake Boot, Throttle Body Adapter

    Brand new throttle body intake boot for the Polaris RZR 1000 motors. A cracked or leaking intake boot will cause a lean condition and engine damage if not corrected. Get it back running like new again with this new direct replacement intake boot by Quad Logic. Replaces Polaris part number 1205302 and 1204714. Fits the following Polaris models:

    2014-20 RZR XP 1000
    2018-20 RS1

    Same as Polaris Part Number: 1205302 and 1204714

    $24.95 $22.46
  • RZR 1000 Stage 1 Engine Tune Up Kit

    If your machine is not running up to its potential, this kit is for you. This Stage 1 kit includes a new air filter, oil filter, and two spark plugs. These simple to replace components can make a huge improvement in a machine that has been maintenance neglected. These filters are excellent quality replacements and Quad Logic approved. The spark plugs are genuine NKG MR7F plugs matched for your 1000 twin. Replaces Polaris part numbers 7081622, 2540086 and 3022662. Works on most 2015-2021 Polaris RZR 1000 models (Except 1000S and Turbo)

    This kit includes:
    – Air Filter
    – Oil Filter
    – NGK Spark Plug (MR7F) x 2

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $49.95 $44.96
  • RZR 1000 Twist Floor Drain Plug

    New replacement floor drain drain plug for your Polaris RZR. Exact replacement plug. Replaces Polaris Part number 5414694. Fits the following models and more:

    2014-23 RZR 1000 (All models)

    Replaces the following Polaris Part Number: 5414694

    $9.95 $8.96
  • RZR 1000 XP Brake Pads

    OEM quality pads but at an incredible value. These semi-metallic brake pads will have similar life as the stock pads and fit the front and rear. Sold as a pair for one caliper. These pads fit all the following Polaris models:

    2014-23 RZR 1000 and RZR-4 1000

     

    Replaces Polaris Part Number: 2203747 and 2205949

     

    $16.95 $15.26

    RZR 1000 XP Brake Pads

    $16.95 $15.26

Main Menu