• Ranger 900 Accessory Frame Tube End Cap Plug Kit

    This neat plug kit finished off the unsightly open frame tubes in your Ranger. The frame tubes fill up with water and mud then start rusting out right away. These plugs simply pound into place with your hand or a rubber mallet and give that professional fit and finish look. Keep your frame tubes clean and rust free with this simple kit! Fits all Ranger 900 XP models from 2013 to current. Not sure if it also fits the Crew model as we are still looking into it. Includes FOUR frame plugs.

    $19.95 $17.96
  • Ranger Body Panel Torx Screw and Flat Nut (Set of 6)

    Brand new flat nut used on many 2014 and newer Polaris Ranger, RZR and ACE models to mount different body panels, fender flares, plastic, etc. Exact replacement for Polaris 7547674. Black zinc plating. This is for a set of 6 flat nuts.

    Exact replacement for Polaris # 7547674

    $10.95 $9.86
  • Ranger Side Safety Window Net Buckle Clips 2″

    Exact replacement 2″ net buckle for many 2015 and newer Rangers. This is a direct replacement from the original manufacturer. This is used on the front of the nets where it clips into the bracket on the roll cage. Just the male buckle shown is included. Many fit other years and models as well, just compare your old buckle to the photo.

    $8.95 $8.06
  • RZR 800 Adjustable Roll Bar Rollbar Clamp for Accessories

    This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. Even the tension is adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of two ways. There is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.

     

    Fits most 2008 and newer RZR 800, 900, 1000 roll bars.

    $22.95 $20.66
  • RZR Pro XP Hood Accent Vent

    Add a unique custom look to your XP Pro Hood with our Quad Logic Hood Accent Vent.  Not only will this vent give a great new look to your machine, this vent kit will help disperse heat from your radiator helping it cool.  Kit includes black and silver plates and 26 rivets for installation. Please note that some cutting of the hood is required for installation.

    FITS THE FOLLOWING MODELS:

    2020-’22    RZR Pro XP (All Models except PRO XP R)

     

    Works on Part number: 545766-070

     

     

    $69.95 $62.96
  • RZR Seat Belt Harness Pass Through Bezel (INDIVIDUAL)

    These plastic seat bezel allow for the installation of 4 or 5 point harnesses in your factory seat by allowing the top straps to go through the back of the seat ensuring a safe proper fitment of the harness.

    Fits most Polaris RZR and General models.

    This plastic bezel will offer a smooth clean look to your seat after they are installed.

    Installation will require some work and cutting the factory seats. We include detailed installation instructions.

    Sold as Each.

    Fits the following Polaris models:
    2015-21 RZR 900 (All)
    2014-21 RZR 1000 (All)
    2016-21 RZR Turbo (All, Except Pro-XP)
    2018-21 RZR RS1

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $24.95 $22.46
  • RZR Turbo Exhaust Aluminum Heat Shield

    Add some style to your RZR turbo while keeping heat under control. This aluminum heat shield has a very military inspired fluted barrel design! Full three sided protection around the main headpipe (behind the rear tire). Not only does it protect your shock and plastic from heat, it also protects the exhaust from flying rocks and debris. The gun barrel look sets your machine apart from the rest! Black powdercoated finish. Simple installation. Fits all 2016-18 RZR Turbo models.

    2016-22 RZR Turbo

    $114.95 $103.46
  • RZR Turbo Smoke Center LED Tail Light

    Murder out your center taillight with this dark smoked LED. Looks black when not on but lights up bright red when you hit the brakes. This is a full LED replacement unit, not just a lens covering. Fits and works just the like expensive factory lens.

    Replaces Polaris part number 2413431. Can be added to some models that did not come with the center taillight from the factory.

    Fits the following models:
    2018-20 RZR Turbo “S”

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $79.95 $71.96
  • RZR Turbo Winch Mount Kit

    Heavy gauge steel Winch Mount Kit specific for your Polaris RZR 900/1000 models. Kit provides the hardware necessary to mount a winch to your Polaris and are designed to fit Cycle Country, Kolpin & other branded aftermarket winches.
    Fits the following models;

    2016-21 RZR Turbo (All Models except Turbo S)

    Sturdy line of winch mount kit provides the hardware necessary to mount a winch to your vehicle
    Designed to fit Kolpin and other branded aftermarket winches with common bolt patterns
    Made with heavy gauge steel
    Powder coat paint protection
    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
    Returns are subject to 15% restocking fee.
    $69.99 $62.99
  • Scrambler 850/1000 Quick Release Dzus Fastener Side Panel Hardware Kit

    It’s very frustrating that Polaris has stooped to using those cheap plastic rivets to attach body panels on their ATV’s. Not only do they break or loosen up over time but you need a special pliers to remove them. The Scrambler 850/1000 side panels are held on with these plastic rivets, what are you to do if you have an engine issue out on the trail and you don’t have tools to remove them? Who wants to grab special pliers to remove the side panels every time you wash it?
    We are problem solvers here at Quad Logic and like to make your life easier. We developed this super trick Dzus fastener kit to easily remove your side panels without tools! They are also much stronger and will not break like the plastic rivets. After some simple installation, all it takes is a quarter turn of the fasteners and the side panel can be removed or installed. Don’t worry about dropping or losing any hardware either, it all stays attached to the side panels!
    This kit includes everything you need to install it on both side panels including instructions. Definitely recommended for all Scrambler 850/1000 owners!

    FITS THE FOLLOWING MODELS:

    2013-’22   Scrambler 850
    2014-’22  Scrambler 1000

    $39.95 $35.96
  • Scrambler XP BILLET Front Storage Rack Latch

    We designed our own 6061 billet aluminum latch assembly for the newer Sportsman and Scrambler front racks. This latch is virtually unbreakable and looks amazing on the machine. Get rid of those flimsy stock plastic latches that break! Both the latch and the shaft are billet aluminum in this assembly. A black anodized finish with an engraved Quad Logic logo looks awesome. We use a strong shoulder bolt to hold the two together and we also include a new spacer and bushing for a complete installation! Installs and works just like the original. Replaces Polaris part numbers 5438117, 5438118, 5413887, 5521796.

    Sold each so order two if replacing both latches.

    Fits the following models:
    2013-21 Scrambler 850
    2014-21 Scrambler 1000

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $29.95 $26.96
  • Scrambler XP Rear Storage Compartment Rubber Strap

    Exact replacement rubber rear storage cover strap for the Scrambler 850/1000. Replaces Polaris part number 5438262. Sold Each. Fits the following models:

    2014-21 Scrambler 850

    2014-21 Scrambler 1000

    Replaces Polaris part number 5438262

    $7.95 $7.16
  • Sportsman 450/570 Footpad Set

    Keep your feet dry and your Sportsman 450/570 fenders protected with our new waterproof EVA footpads! These footpads are made using EVA Foam with 3M adhesive, the same material used on boat decks and jet ski’s. Our footpads are easy to install. Simply clean off your fender surface, then peal and stick!

    FITS THE FOLLOWING MODELS:

    2014-’22  Sportsman 450
    2014-’22  Sportsman 570

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

     

    $39.95 $35.96
  • Sportsman 570 2″ Receiver Tow Hitch

    This is a very heavy duty 2″ receiver style tow hitch for the Sportsman 570. The backbone is made of formed heavy gauge steel which is mated to a thick one-piece receiver tube. We then integrate tow hooks for added strength and a place to put your tow hooks when moving a trailer. Any standard 2″ automotive tow bar will fit into the hitch using the normal 5/8″ pin.

    Installation is simple and we include the mounting hardware and instructions. Black powder coated finish will look great for years. These hitches are made here in the USA!! Please support local manufacturing. This hitch will fit all standard and Touring chassis Sportsman 570’s from 2014-22. Its possible it will fit the X2 but we nave not tried it yet so we cannot confirm. WILL NOT FIT TRAIL, PREMIUM, or UTILITY SPORTSMAN Models

    $79.95 $71.96
  • Sportsman 570 Front Rack Storage Compartment Seal

    Leaking water in the storage compartments under the front rack of your Polaris Sportsman 570? Quad Logic has the fix! We now offer these quality replacement front rack seals. This seal is a direct replacement for Polaris part number 5521833. Please check with the Polaris parts diagrams to ensure fitment before ordering.

    Please note: Only Fits the Touring and X2 Sportsman 570 in 2021 and 2022.

    Fits the following models;

    2016-20 Sportsman 450

    2014-22 Sportsman 570 (X2 and Touring Only in 2021 and 2022)
    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    $21.95 $19.76
  • Sportsman 570 Front Storage Rack Rubber Latch

    Excellent replacement rubber quick latch for the Sportsman front storage rack. Includes the rubber latch with hidden mount. Also includes a metal hook if using it for a different application. Installs and works just like the original. The only difference is the design on the front of the latch is a slightly different. It will not affect the form or function. Replaces Polaris part number 7081927. Fits the following models:

    2016-20 Sportsman 450
    2014-20 Sportsman 570 (All models)
    2015 Sportsman ETX

    Replaces Polaris Part Number: 7081927

    $19.95 $17.96

Main Menu