-
Ranger 900 Accessory Frame Tube End Cap Plug Kit
This neat plug kit finished off the unsightly open frame tubes in your Ranger. The frame tubes fill up with water and mud then start rusting out right away. These plugs simply pound into place with your hand or a rubber mallet and give that professional fit and finish look. Keep your frame tubes clean and rust free with this simple kit! Fits all Ranger 900 XP models from 2013 to current. Not sure if it also fits the Crew model as we are still looking into it. Includes FOUR frame plugs.
$19.95$17.96Ranger 900 Accessory Frame Tube End Cap Plug Kit
$19.95$17.96 -
Ranger 900 Coated Tailgate Cable
Exact replacement stainless steel tailgate cable for many Polaris Ranger models. This cable is a direct fit, it will install just like the original and is the same 10-3/8″ overall length. Has one looped cable end and one steel end with a hole. One key feature over the stock cable is there there is a heavy duty PVC coating over this cable. This extends the cable life, looks better for a much longer period, and will not allow the cable to fray like the stock uncoated cables! It is even MADE in the USA! Fits either left or right side. Sold EACH. Replaces Polaris part number 7081925. Fits the following Polaris Ranger Models:
2014-18 Ranger 900 (XP and Crew Models)
Replacement for the Polaris 7081925
$19.95$17.96Ranger 900 Coated Tailgate Cable
$19.95$17.96 -
Ranger Body Panel Torx Screw and Flat Nut (Set of 6)
Brand new flat nut used on many 2014 and newer Polaris Ranger, RZR and ACE models to mount different body panels, fender flares, plastic, etc. Exact replacement for Polaris 7547674. Black zinc plating. This is for a set of 6 flat nuts.
Exact replacement for Polaris # 7547674
$10.95$9.86Ranger Body Panel Torx Screw and Flat Nut (Set of 6)
$10.95$9.86 -
RZR 1000 XP 2″ Receiver Tow Hitch
This is a very heavy duty 2″ receiver style tow hitch for the RZR 1000. The backbone is made of formed heavy gauge steel which is mated to a thick one-piece receiver tube. We then integrate tow hooks for added strength and a place to put your tow hooks when moving a trailer. Any standard 2″ automotive tow bar will fit into the hitch using the normal 5/8″ pin. It will even work with the Polaris accessory rear bumper!
Installation is simple and we include the mounting hardware and instructions. Black powder coated finish will look great for years. These hitches are made here in the USA!! Please support local manufacturing. This hitch will fit all RZR 1000 and Turbo models from 2014-17.
Note: If you have a 2017 model, be sure to measure your suspension bolt holes before ordering. The 2017’s can have either a 10m or 12m hole.
$79.95$71.96RZR 1000 XP 2″ Receiver Tow Hitch
$79.95$71.96 -
RZR 1000 XP Front Tow Hook
This is a very heavy duty front tow hook for most Polaris RZR models. Thick plate steel construction with dual reinforcements make this a very over-built tow hook! Aggressive design and beefy five point mounting make this a must have accessory. We designed it not to stick out too far from the machine but still have the capability of using either a tow strap or winch hook for towing. Mounts below the winch area so it normally will not interfere if you have a winch mounted. Will NOT fit with most front bumpers.
Installation is simple and we include the mounting hardware and instructions. Black powder coated finish will look great for years. These tow hooks are made here in the USA!! Please support local manufacturing. This hitch will fit the following models:2014-18 RZR 1000 (All Models)
2016-18 RZR Turbo$39.95$35.96RZR 1000 XP Front Tow Hook
$39.95$35.96 -
RZR 800 Adjustable Roll Bar Rollbar Clamp for Accessories
This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. Even the tension is adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of two ways. There is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
Fits most 2008 and newer RZR 800, 900, 1000 roll bars.
$22.95$20.66 -
RZR 900 Replacement Seat Cover
Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. This is not a cheesy cover that goes over the stock seats. You will need to remove the stock seat covers and re-staple these OEM quality covers in place to make your seats look and feel like new again! Simply remove the old seat covers and staple the new covers in its place. The all weather material is resistant to cracking, fading, and splitting. Fully sewn seams and custom cut panels make these fit and perform excellent. These covers are MADE IN THE USA!! Sold EACH for one complete seat (one seat base cover and one seat back cover). The seat covers come in black only. NOTE: ONLY THE SEAT COVERS ARE INCLUDED, NOT THE ENTIRE SEAT OR FOAM. Fits the following RZR models:
2011-14 RZR 900 (All models)
$89.95$80.96RZR 900 Replacement Seat Cover
$89.95$80.96 -
RZR Roll Bar Clamp w/Bracket for LED Lights, Windshields, Roofs…
This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. This clamp is differentiated from our other clamps by the bracket installed to give you extra mounting options. It has a larger 7/16″ hole to handle heavier accessories. The tension is also adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of a couple ways. The easiest is bolting through the 7/16″ hole on the bracket. If this does not work for your application you can actually remove the bracket and there is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
These are the strongest, best looking, most versatile quick release roll bar clamps on the market!!! Fits most 2008-16 RZR 570, 800, 900, and 1000 models.$24.95$22.46 -
RZR XP 900 Graphics Kit
Give your RZR a makeover with this affordable graphics kit. Too often your machine with get ripped, torn, or faded graphics over the years that can reduce its appearance and value. We designed this kit to be an OEM look unlike the other crazy flames, skulls, etc wraps that are out there. This kit both updates the style and appearance of your machine at a fraction of the cost of OEM graphics. Includes graphics for both the left and right sides of the machine as well as the hood. Heavy gauge 10 mil vinyl is extremely durable for outdoor use and UV resistant as well. Does NOT include any warning decals. This is designed to match the factory RED colored machines.
Will fit 2011-2014 RZR 900 XP (2 Seater Models Only)
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$99.95$89.96RZR XP 900 Graphics Kit
$99.95$89.96 -
Scrambler 850/1000 Quick Release Dzus Fastener Side Panel Hardware Kit
It’s very frustrating that Polaris has stooped to using those cheap plastic rivets to attach body panels on their ATV’s. Not only do they break or loosen up over time but you need a special pliers to remove them. The Scrambler 850/1000 side panels are held on with these plastic rivets, what are you to do if you have an engine issue out on the trail and you don’t have tools to remove them? Who wants to grab special pliers to remove the side panels every time you wash it?
We are problem solvers here at Quad Logic and like to make your life easier. We developed this super trick Dzus fastener kit to easily remove your side panels without tools! They are also much stronger and will not break like the plastic rivets. After some simple installation, all it takes is a quarter turn of the fasteners and the side panel can be removed or installed. Don’t worry about dropping or losing any hardware either, it all stays attached to the side panels!
This kit includes everything you need to install it on both side panels including instructions. Definitely recommended for all Scrambler 850/1000 owners!FITS THE FOLLOWING MODELS:
2013-’22 Scrambler 850
2014-’22 Scrambler 1000$39.95$35.96 -
Scrambler XP BILLET Front Storage Rack Latch
We designed our own 6061 billet aluminum latch assembly for the newer Sportsman and Scrambler front racks. This latch is virtually unbreakable and looks amazing on the machine. Get rid of those flimsy stock plastic latches that break! Both the latch and the shaft are billet aluminum in this assembly. A black anodized finish with an engraved Quad Logic logo looks awesome. We use a strong shoulder bolt to hold the two together and we also include a new spacer and bushing for a complete installation! Installs and works just like the original. Replaces Polaris part numbers 5438117, 5438118, 5413887, 5521796.
Sold each so order two if replacing both latches.
Fits the following models:
2013-21 Scrambler 850
2014-21 Scrambler 1000Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$29.95$26.96Scrambler XP BILLET Front Storage Rack Latch
$29.95$26.96 -
Scrambler XP Rear Storage Compartment Rubber Strap
Exact replacement rubber rear storage cover strap for the Scrambler 850/1000. Replaces Polaris part number 5438262. Sold Each. Fits the following models:
2014-21 Scrambler 850
2014-21 Scrambler 1000
Replaces Polaris part number 5438262
$7.95$7.16 -
Sportsman 450 570 STEEL Footwell Floorboards LEFT SIDE
You’ve asked for them and now they are ready! Following our popular older Style sportsman steel footwells, these are the new Sportsman 450/570 footwells! The fit and finish is fantastic on these footwells, the lines match perfectly and they look like OEM equipment. These floorboards are manufactured from lasered sheet steel then formed to fit the contour of your fenders. We even put tabs on the backside to hold your plastic in place. We even kept the nice footpegs that run from side to side! Lastly they are finished in a beautiful black texture powdercoat for a long lasting finish. This special powdercoat is VERY grippy, it feels like grip tape so your boots will not slide around in the floorboards. Plastic does not belong on an ATV! Fix yours for good with these new steel footwells. Fits similar to stock, you can re-use most the original hardware and we add some hardware to finish it off. Includes Left floorboards. Replaces Polaris part number 5450523-070
Fits all 2014-19 standard chassis Sportsman 450 and 570 including EPS and SP models.
NOTE: Due to the excessive size/shape of these footwells it is possible they will get some small scratches or scuffs during shipping. We do package them very well but the shipping companies are rough with them. If you are looking for show quality, please do not order. They will arrive in good condition and hopefully perfect but we cannot guarantee there will not be some small scratches/scuffs. If so, they can easily be fixed up with some touch-up paint. Thank you.
Replaces Polaris Part Number: 5450523-070
$199.95$179.96Sportsman 450 570 STEEL Footwell Floorboards LEFT SIDE
$199.95$179.96 -
Sportsman 450 570 STEEL Footwell Floorboards RIGHT SIDE
You’ve asked for them and now they are ready! Following our popular older Style sportsman steel footwells, these are the new Sportsman 450/570 footwells! The fit and finish is fantastic on these footwells, the lines match perfectly and they look like OEM equipment. These floorboards are manufactured from lasered sheet steel then formed to fit the contour of your fenders. We even put tabs on the backside to hold your plastic in place. We even kept the nice footpegs that run from side to side! Lastly they are finished in a beautiful black texture powdercoat for a long lasting finish. This special powdercoat is VERY grippy, it feels like grip tape so your boots will not slide around in the floorboards. Plastic does not belong on an ATV! Fix yours for good with these new steel footwells. Fits similar to stock, you can re-use most the original hardware and we add some hardware to finish it off. Includes Right floorboards. Replaces Polaris part number 5450524-070
Fits all 2014-19 standard chassis Sportsman 450 and 570 including EPS and SP models.
NOTE: Due to the excessive size/shape of these footwells it is possible they will get some small scratches or scuffs during shipping. We do package them very well but the shipping companies are rough with them. If you are looking for show quality, please do not order. They will arrive in good condition and hopefully perfect but we cannot guarantee there will not be some small scratches/scuffs. If so, they can easily be fixed up with some touch-up paint. Thank you.
Replaces Polaris Part Number: 5450524-070
$199.95$179.96Sportsman 450 570 STEEL Footwell Floorboards RIGHT SIDE
$199.95$179.96 -
Sportsman 450/570 Footpad Set
Keep your feet dry and your Sportsman 450/570 fenders protected with our new waterproof EVA footpads! These footpads are made using EVA Foam with 3M adhesive, the same material used on boat decks and jet ski’s. Our footpads are easy to install. Simply clean off your fender surface, then peal and stick!
FITS THE FOLLOWING MODELS:
2014-’22 Sportsman 450
2014-’22 Sportsman 570We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$39.95$35.96Sportsman 450/570 Footpad Set
$39.95$35.96 -
Sportsman 570 2″ Receiver Tow Hitch
This is a very heavy duty 2″ receiver style tow hitch for the Sportsman 570. The backbone is made of formed heavy gauge steel which is mated to a thick one-piece receiver tube. We then integrate tow hooks for added strength and a place to put your tow hooks when moving a trailer. Any standard 2″ automotive tow bar will fit into the hitch using the normal 5/8″ pin.
Installation is simple and we include the mounting hardware and instructions. Black powder coated finish will look great for years. These hitches are made here in the USA!! Please support local manufacturing. This hitch will fit all standard and Touring chassis Sportsman 570’s from 2014-22. Its possible it will fit the X2 but we nave not tried it yet so we cannot confirm. WILL NOT FIT TRAIL, PREMIUM, or UTILITY SPORTSMAN Models
$79.95$71.96Sportsman 570 2″ Receiver Tow Hitch
$79.95$71.96
- HOME
- Quad-Logic ATV Parts
- POLARIS RZR PARTS AND ACCESSORIES
- Polaris RZR 570 Parts and Accessories
- Polaris RZR 800 Parts and Accessories
- Polaris RZR 900 XP Parts and Accessories
- Polaris RZR 1000 XP Parts and Accessories
- Polaris RZR 1000 S Parts and Accessories
- Polaris RZR 900 Trail/XC/S Parts and Accessories
- RS1 Parts and Accessories
- RZR PRO XP
- Polaris RZR Turbo Parts and Accessories
- POLARIS RANGER PARTS AND ACCESSORIES
- POLARIS ATV PARTS AND ACCESSORIES
- Sportsman 400
- Polaris Sportsman 500 Parts and Accessories
- Polaris Sportsman 570 Parts and Accessories
- Polaris Sportsman 600 Parts and Accessories
- Polaris Sportsman 700 Parts and Accessories
- Polaris Sportsman 800 Parts and Accessories
- Polaris Sportsman 550/850/1000 XP Parts and Accessories
- Polaris Scrambler 500 Parts and Accessories
- Polaris Scrambler 850/1000 Parts and Accessories
- Polaris Trailblazer Parts and Accessories
- Polaris Magnum Parts and Accessories
- Polaris Ace Parts and Accessories
- CAN-AM PARTS AND ACCESSORIES
- POLARIS RZR PARTS AND ACCESSORIES
- ATV
- UTV
- SNOWMOBILE
- MOTORCYCLE
- LAWN & GARDEN
- Small Engine Parts
- 50% OFF PRODUCTS
- Checkout