-
Ranger 900 Accessory Frame Tube End Cap Plug Kit
This neat plug kit finished off the unsightly open frame tubes in your Ranger. The frame tubes fill up with water and mud then start rusting out right away. These plugs simply pound into place with your hand or a rubber mallet and give that professional fit and finish look. Keep your frame tubes clean and rust free with this simple kit! Fits all Ranger 900 XP models from 2013 to current. Not sure if it also fits the Crew model as we are still looking into it. Includes FOUR frame plugs.
$19.95$17.96Ranger 900 Accessory Frame Tube End Cap Plug Kit
$19.95$17.96 -
RZR 800 Adjustable Roll Bar Rollbar Clamp for Accessories
This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. Even the tension is adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of two ways. There is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
Fits most 2008 and newer RZR 800, 900, 1000 roll bars.
$22.95$20.66 -
RZR 900 Replacement Seat Cover
Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. This is not a cheesy cover that goes over the stock seats. You will need to remove the stock seat covers and re-staple these OEM quality covers in place to make your seats look and feel like new again! Simply remove the old seat covers and staple the new covers in its place. The all weather material is resistant to cracking, fading, and splitting. Fully sewn seams and custom cut panels make these fit and perform excellent. These covers are MADE IN THE USA!! Sold EACH for one complete seat (one seat base cover and one seat back cover). The seat covers come in black only. NOTE: ONLY THE SEAT COVERS ARE INCLUDED, NOT THE ENTIRE SEAT OR FOAM. Fits the following RZR models:
2011-14 RZR 900 (All models)
$89.95$80.96RZR 900 Replacement Seat Cover
$89.95$80.96 -
RZR Roll Bar Clamp w/Bracket for LED Lights, Windshields, Roofs…
This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. This clamp is differentiated from our other clamps by the bracket installed to give you extra mounting options. It has a larger 7/16″ hole to handle heavier accessories. The tension is also adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of a couple ways. The easiest is bolting through the 7/16″ hole on the bracket. If this does not work for your application you can actually remove the bracket and there is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
These are the strongest, best looking, most versatile quick release roll bar clamps on the market!!! Fits most 2008-16 RZR 570, 800, 900, and 1000 models.$24.95$22.46 -
RZR XP 900 Graphics Kit
Give your RZR a makeover with this affordable graphics kit. Too often your machine with get ripped, torn, or faded graphics over the years that can reduce its appearance and value. We designed this kit to be an OEM look unlike the other crazy flames, skulls, etc wraps that are out there. This kit both updates the style and appearance of your machine at a fraction of the cost of OEM graphics. Includes graphics for both the left and right sides of the machine as well as the hood. Heavy gauge 10 mil vinyl is extremely durable for outdoor use and UV resistant as well. Does NOT include any warning decals. This is designed to match the factory RED colored machines.
Will fit 2011-2014 RZR 900 XP (2 Seater Models Only)
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$99.95$89.96RZR XP 900 Graphics Kit
$99.95$89.96 -
Scrambler 850/1000 Quick Release Dzus Fastener Side Panel Hardware Kit
It’s very frustrating that Polaris has stooped to using those cheap plastic rivets to attach body panels on their ATV’s. Not only do they break or loosen up over time but you need a special pliers to remove them. The Scrambler 850/1000 side panels are held on with these plastic rivets, what are you to do if you have an engine issue out on the trail and you don’t have tools to remove them? Who wants to grab special pliers to remove the side panels every time you wash it?
We are problem solvers here at Quad Logic and like to make your life easier. We developed this super trick Dzus fastener kit to easily remove your side panels without tools! They are also much stronger and will not break like the plastic rivets. After some simple installation, all it takes is a quarter turn of the fasteners and the side panel can be removed or installed. Don’t worry about dropping or losing any hardware either, it all stays attached to the side panels!
This kit includes everything you need to install it on both side panels including instructions. Definitely recommended for all Scrambler 850/1000 owners!FITS THE FOLLOWING MODELS:
2013-’22 Scrambler 850
2014-’22 Scrambler 1000$39.95$35.96 -
Scrambler XP BILLET Front Storage Rack Latch
We designed our own 6061 billet aluminum latch assembly for the newer Sportsman and Scrambler front racks. This latch is virtually unbreakable and looks amazing on the machine. Get rid of those flimsy stock plastic latches that break! Both the latch and the shaft are billet aluminum in this assembly. A black anodized finish with an engraved Quad Logic logo looks awesome. We use a strong shoulder bolt to hold the two together and we also include a new spacer and bushing for a complete installation! Installs and works just like the original. Replaces Polaris part numbers 5438117, 5438118, 5413887, 5521796.
Sold each so order two if replacing both latches.
Fits the following models:
2013-21 Scrambler 850
2014-21 Scrambler 1000Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$29.95$26.96Scrambler XP BILLET Front Storage Rack Latch
$29.95$26.96 -
Sportsman 800 6×6 Coated Tailgate Cable
Exact replacement stainless steel tailgate cable for many Polaris 6×6 ATV’s. This cable is a direct fit, it will install just like the original and is the same 12-3/8″ overall length with .285″ mounting holes. One key feature over the stock cable is there there is a heavy duty PVC coating over this cable. This extends the cable life, looks better for a much longer period, and will not allow the cable to fray like the stock uncoated cables! It is even MADE in the USA! Fits either left or right side. Sold EACH. Replaces Polaris part number 7080881. Fits the following Polaris models:
2009-14 Sportsman 800 6×6
Replaces Polaris Part Number 7080881
$19.95$17.96Sportsman 800 6×6 Coated Tailgate Cable
$19.95$17.96 -
Sportsman 800 Front Rack Rubber Latch
Exact replacement lockable rubber quick latch for the Sportsman front storage rack. Includes the rubber latch with hidden mount and the steel hook. Fits the 2012-14 Sportsman 800 and Sportsman 800 6×6.
Replaces Polaris part number 7081738 and 7081737.
$19.95$17.96Sportsman 800 Front Rack Rubber Latch
$19.95$17.96 -
Sportsman 800 Handlebars
Heavy guage steel replacement 7/8″ handlebars. Fits all 2006-14 SPORTSMAN 800. 30″ wide with 6.5″ rise is the same as the original bars. Black powdercoated finish with knurled mounting areas.
$44.95$40.46Sportsman 800 Handlebars
$44.95$40.46 -
Sportsman X2 & Touring 500 Seat Cover
Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. Our new seat covers are made out of a very high quality advanced material. It has a 4 way stretch pattern unlike most cheaper 2 way stretch materials. The benefit to the 4 way stretch is that it will be easier to install and be much less prone to wrinkles! You can stretch it any direction to staple it in place. Secondly, this is a low temp material. It will not crack or tear down to -20 degrees! The cheap materials just do not stand up to the cold. To install, simply remove the old seat cover and staple this cover in its place, instructions are included. This cover is proudly MADE IN THE USA. FITS TOURING AND X2 MODELS ONLY!
THIS IS NOT A COMPLETE SEAT, IT IS THE SEAT COVERING ONLY!
FITS THE FOLLOWING MODEL(S):2008-’13 SPORTSMAN TOURING 500* 2006-’09 SPORTSMAN X2 500* *FITS X2 AND TOURING MODELS ONLY!
REPLACES POLARIS PART NUMBER(S): 2683863-070 and 2684134We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$49.95$44.96Sportsman X2 & Touring 500 Seat Cover
$49.95$44.96 -
Sportsman XP Graphics Kit
Give your 2009-15 Polaris Sportsman XP a makeover with this affordable graphics kit. Too often your machine with get ripped, torn, or faded graphics over the years that can reduce its appearance and value. We designed this kit to be an OEM look unlike the other crazy flames, skulls, etc wraps that are out there. This kit both updates the style and appearance of your machine at a fraction of the cost of OEM graphics.
Includes graphics for both the left and right sides of the machine as well as the handlebar pod. Comes with both 550 and 850 stickers so you can choose the ones to match your machine. Heavy gauge 10 mil vinyl is extremely durable for outdoor use and UV resistant as well. Color neutral black, white, and grey (with a touch of red) will look amazing on any color of machine. We included all the applicable engine size decals as well so you can pick the correct one for your machine. Includes all the decals shown in the picture.
Replaces Polaris Part Numbers: 3089996 and 2520799
Will fit all 2009-15 Sportsman 550 and 850 XP models.
$69.95$62.96Sportsman XP Graphics Kit
$69.95$62.96 -
Sportsman XP Replacement Seat Cover
Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. Simply remove the old seat cover and staple this in its place. Fits standard chassis only, does not fit Touring or X2 models.Custom fit for the following models:
2009-16 Sportsman 550 and 850 XP models.
$39.95$35.96Sportsman XP Replacement Seat Cover
$39.95$35.96
- HOME
- Quad-Logic ATV Parts
- POLARIS RZR PARTS AND ACCESSORIES
- Polaris RZR 570 Parts and Accessories
- Polaris RZR 800 Parts and Accessories
- Polaris RZR 900 XP Parts and Accessories
- Polaris RZR 1000 XP Parts and Accessories
- Polaris RZR 1000 S Parts and Accessories
- Polaris RZR 900 Trail/XC/S Parts and Accessories
- RS1 Parts and Accessories
- RZR PRO XP
- Polaris RZR Turbo Parts and Accessories
- POLARIS RANGER PARTS AND ACCESSORIES
- POLARIS ATV PARTS AND ACCESSORIES
- Sportsman 400
- Polaris Sportsman 500 Parts and Accessories
- Polaris Sportsman 570 Parts and Accessories
- Polaris Sportsman 600 Parts and Accessories
- Polaris Sportsman 700 Parts and Accessories
- Polaris Sportsman 800 Parts and Accessories
- Polaris Sportsman 550/850/1000 XP Parts and Accessories
- Polaris Scrambler 500 Parts and Accessories
- Polaris Scrambler 850/1000 Parts and Accessories
- Polaris Trailblazer Parts and Accessories
- Polaris Magnum Parts and Accessories
- Polaris Ace Parts and Accessories
- CAN-AM PARTS AND ACCESSORIES
- POLARIS RZR PARTS AND ACCESSORIES
- ATV
- UTV
- SNOWMOBILE
- MOTORCYCLE
- LAWN & GARDEN
- Small Engine Parts
- 50% OFF PRODUCTS
- Checkout