• RZR 800 Adjustable Roll Bar Rollbar Clamp for Accessories

    This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. Even the tension is adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of two ways. There is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.

     

    Fits most 2008 and newer RZR 800, 900, 1000 roll bars.

    $22.95 $20.66
  • RZR 800 Grab Handle Cup Holder Kit with Can Koozies

    This new cup holder kit is awesome!  We designed the mount to simply slide over the passenger grab handle on the Polaris RZR and bolt into place.  Two stainless steel cup holders are included.  The cupholders even have drains at the bottom so they wont fill up with water.  Strong double sided tape around the lip of the cup holders keeps them secure to the mount.  Lastly we include two or our custom foam can koozies.  These are no ordinary koozies, they actually have lids so you can keep dirt and dust out of your drink when going down the trail!  We take our drinks seriously here at Quad Logic!

    Keep your favorite beverages within quick reach with this great new cupholder kit from Quad Logic.  Includes everything you need to keep cool on the trail.

    Fits all 2011 and older RZR models with the ROUND passenger grab handle tube.

    $39.95 $35.96
  • RZR 900 Replacement Seat Cover

     

    Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. This is not a cheesy cover that goes over the stock seats. You will need to remove the stock seat covers and re-staple these OEM quality covers in place to make your seats look and feel like new again! Simply remove the old seat covers and staple the new covers in its place. The all weather material is resistant to cracking, fading, and splitting. Fully sewn seams and custom cut panels make these fit and perform excellent. These covers are MADE IN THE USA!! Sold EACH for one complete seat (one seat base cover and one seat back cover). The seat covers come in black only. NOTE: ONLY THE SEAT COVERS ARE INCLUDED, NOT THE ENTIRE SEAT OR FOAM. Fits the following RZR models:

     

    2011-14 RZR 900 (All models)

    $89.95 $80.96
  • RZR Roll Bar Clamp w/Bracket for LED Lights, Windshields, Roofs…

    This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. This clamp is differentiated from our other clamps by the bracket installed to give you extra mounting options. It has a larger 7/16″ hole to handle heavier accessories. The tension is also adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of a couple ways. The easiest is bolting through the 7/16″ hole on the bracket. If this does not work for your application you can actually remove the bracket and there is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
    These are the strongest, best looking, most versatile quick release roll bar clamps on the market!!! Fits most 2008-16 RZR 570, 800, 900, and 1000 models.

    $24.95 $22.46
  • RZR XP 900 Graphics Kit

    Give your RZR a makeover with this affordable graphics kit. Too often your machine with get ripped, torn, or faded graphics over the years that can reduce its appearance and value. We designed this kit to be an OEM look unlike the other crazy flames, skulls, etc wraps that are out there. This kit both updates the style and appearance of your machine at a fraction of the cost of OEM graphics. Includes graphics for both the left and right sides of the machine as well as the hood. Heavy gauge 10 mil vinyl is extremely durable for outdoor use and UV resistant as well. Does NOT include any warning decals. This is designed to match the factory RED colored machines.

    Will fit 2011-2014 RZR 900 XP (2 Seater Models Only)

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $99.95 $89.96

    RZR XP 900 Graphics Kit

    $99.95 $89.96
  • Sportsman 500 Storage Box Latch Left

    Replacement quarter turn latch with detent for the Sportsman front storage rack. This perfect replacement includes the glass filled nylon thumb latch with LH steel hook. Also included a new steel mounting nut and rubber washer. This latch fits the LEFT side only (when sitting on the machine). Replaces Polaris part number 7081241, 7081421, and 7081145. Fits the following Polaris models:

    2008-11 Hawkeye
    2006 Magnum 330
    2008-10 Sportsman 300
    2005 and 2008-10 Sportsman 400
    2006-07 Sportsman 450
    2005-10 Sportsman 500 (All, including X2, Touring, 6×6)

    Replaces Polaris Part Numbers: 7081241, 7081421, and 7081145

    $11.95 $10.76
  • Sportsman 800 6×6 Coated Tailgate Cable

     

    Exact replacement stainless steel tailgate cable for many Polaris 6×6 ATV’s. This cable is a direct fit, it will install just like the original and is the same 12-3/8″ overall length with .285″ mounting holes. One key feature over the stock cable is there there is a heavy duty PVC coating over this cable. This extends the cable life, looks better for a much longer period, and will not allow the cable to fray like the stock uncoated cables! It is even MADE in the USA! Fits either left or right side. Sold EACH. Replaces Polaris part number 7080881. Fits the following Polaris models:

     

    2009-14 Sportsman 800 6×6

    Replaces Polaris Part Number 7080881

    $19.95 $17.96
  • Sportsman 800 Handlebars

    Heavy guage steel replacement 7/8″ handlebars. Fits all 2006-14 SPORTSMAN 800. 30″ wide with 6.5″ rise is the same as the original bars. Black powdercoated finish with knurled mounting areas.

    $44.95 $40.46

    Sportsman 800 Handlebars

    $44.95 $40.46
  • Sportsman 850 Air Box Lid Knob Bolt

    Exact replacement air box lid thumbscrew for the Sportsman 550 and 850 models. Sold Each so order two if replacing both. Replaces Polaris part number 7081544 and 7081619. Fits the 2009-11 850 XP model airbox lid’s.

    Replaces Polaris part number 7081619

    $7.95 $7.16
  • Sportsman X2 & Touring 500 Seat Cover

    Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. Our new seat covers are made out of a very high quality advanced material. It has a 4 way stretch pattern unlike most cheaper 2 way stretch materials. The benefit to the 4 way stretch is that it will be easier to install and be much less prone to wrinkles! You can stretch it any direction to staple it in place. Secondly, this is a low temp material. It will not crack or tear down to -20 degrees! The cheap materials just do not stand up to the cold. To install, simply remove the old seat cover and staple this cover in its place, instructions are included. This cover is proudly MADE IN THE USA. FITS TOURING AND X2 MODELS ONLY!

    THIS IS NOT A COMPLETE SEAT, IT IS THE SEAT COVERING ONLY!


    FITS THE FOLLOWING MODEL(S):

    2008-’13 SPORTSMAN TOURING 500*
    2006-’09 SPORTSMAN X2 500*

    *FITS X2 AND TOURING MODELS ONLY!
    REPLACES POLARIS PART NUMBER(S): 2683863-070 and 2684134

     

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $49.95 $44.96
  • Sportsman XP Graphics Kit

    Give your 2009-15 Polaris Sportsman XP a makeover with this affordable graphics kit. Too often your machine with get ripped, torn, or faded graphics over the years that can reduce its appearance and value. We designed this kit to be an OEM look unlike the other crazy flames, skulls, etc wraps that are out there. This kit both updates the style and appearance of your machine at a fraction of the cost of OEM graphics.

    Includes graphics for both the left and right sides of the machine as well as the handlebar pod. Comes with both 550 and 850 stickers so you can choose the ones to match your machine. Heavy gauge 10 mil vinyl is extremely durable for outdoor use and UV resistant as well. Color neutral black, white, and grey (with a touch of red) will look amazing on any color of machine. We included all the applicable engine size decals as well so you can pick the correct one for your machine. Includes all the decals shown in the picture.

    Replaces Polaris Part Numbers: 3089996 and 2520799

    Will fit all 2009-15 Sportsman 550 and 850 XP models.

    $69.95 $62.96
  • Sportsman XP Replacement Seat Cover

    Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. Simply remove the old seat cover and staple this in its place. Fits standard chassis only, does not fit Touring or X2 models.Custom fit for the following models:

    2009-16 Sportsman 550 and 850 XP models.

    $39.95 $35.96

Main Menu