• RZR 800 Adjustable Roll Bar Rollbar Clamp for Accessories

    This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. Even the tension is adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of two ways. There is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.

     

    Fits most 2008 and newer RZR 800, 900, 1000 roll bars.

    $22.95 $20.66
  • RZR 800 Grab Handle Cup Holder Kit with Can Koozies

    This new cup holder kit is awesome!  We designed the mount to simply slide over the passenger grab handle on the Polaris RZR and bolt into place.  Two stainless steel cup holders are included.  The cupholders even have drains at the bottom so they wont fill up with water.  Strong double sided tape around the lip of the cup holders keeps them secure to the mount.  Lastly we include two or our custom foam can koozies.  These are no ordinary koozies, they actually have lids so you can keep dirt and dust out of your drink when going down the trail!  We take our drinks seriously here at Quad Logic!

    Keep your favorite beverages within quick reach with this great new cupholder kit from Quad Logic.  Includes everything you need to keep cool on the trail.

    Fits all 2011 and older RZR models with the ROUND passenger grab handle tube.

    $39.95 $35.96
  • RZR Roll Bar Clamp w/Bracket for LED Lights, Windshields, Roofs…

    This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. This clamp is differentiated from our other clamps by the bracket installed to give you extra mounting options. It has a larger 7/16″ hole to handle heavier accessories. The tension is also adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of a couple ways. The easiest is bolting through the 7/16″ hole on the bracket. If this does not work for your application you can actually remove the bracket and there is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
    These are the strongest, best looking, most versatile quick release roll bar clamps on the market!!! Fits most 2008-16 RZR 570, 800, 900, and 1000 models.

    $24.95 $22.46
  • Sportsman 400 (2008-2010) Seat Cover

    Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. Our new seat covers are made out of a very high quality advanced material. It has a 4 way stretch pattern unlike most cheaper 2 way stretch materials. The benefit to the 4 way stretch is that it will be easier to install and be much less prone to wrinkles! You can stretch it any direction to staple it in place. Secondly, this is a low temp material. It will not crack or tear down to -20 degrees! The cheap materials just do not stand up to the cold. To install, simply remove the old seat cover and staple this cover in its place, instructions are included. This cover is proudly MADE IN THE USA.

    THIS IS NOT A COMPLETE SEAT, IT IS THE SEAT COVERING ONLY!


    FITS THE FOLLOWING MODEL(S):

    2008-’10 SPORTSMAN 400

    ALSO FITS….

    2008-10 SPORTSMAN 300


    REPLACES POLARIS PART NUMBER(S): 2684012-070 and 2684061

     

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $44.95 $40.46
  • Sportsman 500 2″ Receiver Tow Hitch

    This is a very heavy duty 2″ receiver style tow hitch for the Sportsman 500. The backbone is made of formed heavy gauge steel which is mated to a thick one-piece receiver tube. We then integrate tow hooks for added strength and a place to put your tow hooks when moving a trailer. Any standard 2″ automotive tow bar will fit into the hitch using the normal 5/8″ pin.
    Installation is simple and we include the mounting hardware and instructions. Black powder coated finish will look great for years. These hitches are made here in the USA!! Please support local manufacturing. This hitch will fit all standard chassis Sportsman 500’s from 2005-10. It does NOT fit the X2 models. Its possible it will fit the Touring but we nave not tried it yet so we cannot confirm. Also may fit the 700 and 800 but not sure yet.

    $69.95 $62.96
  • Sportsman 500 600 700 800 (2005-10) Body Stickers Decals Graphics Kit

    Give your 2005-10 Polaris Sportsman a makeover with this affordable graphics kit.  Too often your machine with get ripped, torn, or faded graphics over the years that can reduce its appearance and value.  We designed this kit to be an OEM look unlike the other crazy flames, skulls, etc wraps that are out there.  This kit both updates the style and appearance of your machine at a fraction of the cost of OEM graphics.  Includes graphics for both the left and right sides of the machine as well as the handlebar pod.  Heavy gauge 10 mil vinyl is extremely durable for outdoor use and UV resistant as well.  Color neutral black, white, and grey (with a touch of red) will look amazing on any color of machine.  We included all the applicable engine size decals as well so you can pick the correct one for your machine.  Includes all the decals shown in the picture.  Does NOT include any warning decals.

    Will fit all 2005-10 Sportsman 400 (2005 model only), 450, 500, 600, 700 and 800 models.

    $69.95 $62.96
  • Sportsman 500 Rear Rack

    Replace your broken rear rack with our new replacement rack. This injection molded plastic rack will mount and look just as good as the OE, but with a much better price! Installs exactly the same as the stock rack. Mounting hardware NOT included but we do also sell the mounting pins in our store. You will also need to use your existing steel frame. This rack will replace Polaris number 2633208-070.

    FITS THE FOLLOWING MODEL(S):

    2006-’10 SPORTSMAN 500
    2006-’07 SPORTSMAN 450

    REPLACES POLARIS PART NUMBER(S): 2633208-070

    $149.95 $134.96

    Sportsman 500 Rear Rack

    $149.95 $134.96
  • Sportsman 500 Storage Box Latch Left

    Replacement quarter turn latch with detent for the Sportsman front storage rack. This perfect replacement includes the glass filled nylon thumb latch with LH steel hook. Also included a new steel mounting nut and rubber washer. This latch fits the LEFT side only (when sitting on the machine). Replaces Polaris part number 7081241, 7081421, and 7081145. Fits the following Polaris models:

    2008-11 Hawkeye
    2006 Magnum 330
    2008-10 Sportsman 300
    2005 and 2008-10 Sportsman 400
    2006-07 Sportsman 450
    2005-10 Sportsman 500 (All, including X2, Touring, 6×6)

    Replaces Polaris Part Numbers: 7081241, 7081421, and 7081145

    $11.95 $10.76
  • Sportsman 800 Handlebars

    Heavy guage steel replacement 7/8″ handlebars. Fits all 2006-14 SPORTSMAN 800. 30″ wide with 6.5″ rise is the same as the original bars. Black powdercoated finish with knurled mounting areas.

    $44.95 $40.46

    Sportsman 800 Handlebars

    $44.95 $40.46
  • Sportsman 800 X2 Tailgate Latches

    If you broke one of your tailgate latches we have exact replacement units for your X2. Heavy duty zinc plated steel construction with a spring loaded latch cam. Sold each.

    Fits the following:

    2007-09 Sportsman 800 X2

    Replaces Polaris part number 7081099.

    $19.95 $17.96
  • Sportsman X2 & Touring 500 Seat Cover

    Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. Our new seat covers are made out of a very high quality advanced material. It has a 4 way stretch pattern unlike most cheaper 2 way stretch materials. The benefit to the 4 way stretch is that it will be easier to install and be much less prone to wrinkles! You can stretch it any direction to staple it in place. Secondly, this is a low temp material. It will not crack or tear down to -20 degrees! The cheap materials just do not stand up to the cold. To install, simply remove the old seat cover and staple this cover in its place, instructions are included. This cover is proudly MADE IN THE USA. FITS TOURING AND X2 MODELS ONLY!

    THIS IS NOT A COMPLETE SEAT, IT IS THE SEAT COVERING ONLY!


    FITS THE FOLLOWING MODEL(S):

    2008-’13 SPORTSMAN TOURING 500*
    2006-’09 SPORTSMAN X2 500*

    *FITS X2 AND TOURING MODELS ONLY!
    REPLACES POLARIS PART NUMBER(S): 2683863-070 and 2684134

     

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $49.95 $44.96

Main Menu