• Trailblazer/Trailboss 250 Top End Gasket Kit

    Kit includes head, base, and exhaust gasket to rebuild the top end of your Polaris 250. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following top end gaskets shown in the photo including:

    Head Gasket
    Base Gasket
    Exhaust Gasket

    This gasket kit fits the following models:

    1990-2006 Trailblazer 250

    1989-92 Trailboss 250

    1989-92 Big Boss 250

    2000-02 Xplorer 250

     

    $24.95 $22.46
  • Trailblazer Secondary Clutch Puller

    The secondary clutch is supposed to slide right off the shaft. However, if neglected, the clutch will be rusted onto the shaft and you simply cannot get it off without this puller. Hardened steel puller is plated for corrosion resistance. 5.5″ overall length. Same as Polaris part number 2870913.


    Fits all 1990-2013 Trailblazer 250/330/400 models

    Same as Polaris part number 2870913.

    $24.95 $22.46
  • Trailblazer Primary Clutch Puller

    Brand new primary clutch puller for almost all 1985 and newer Polaris ATV’s and UTV’s using the P85 primary clutch. Hardened steel puller is plated for corrosion resistance. 10.25″ overall length and 3/4″-16 threads. Be sure to use a dab of grease on the end of the puller and threads to properly pull the clutch. Same as Polaris part number 2870506.

    Fits all 1990-2013 Trailblazer 250/330/400 models

    Same as Polaris part number 2870506.

    $24.95 $22.46
  • Trailblazer Primary Clutch Bolt and Washers

    Brand new primary clutch bolt and washers for many single cylinder Polaris ATV and UTV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5210748, 7512566, and 7575202. Includes one clutch bolt, one thick flat washer, and one star type washer. Fits the following models and more:

    1990-2006 Trailblazer 250

    2008-13 Trailblazer 330

    Replaces Polaris Part Number: 5210748, 7512566, and 7575202

    $8.95 $8.06
  • Trailblazer Gates G-Force Workhorse Drive Belt

     

    Quad Logic is now a Gates distributor for all your Polaris ATV and UTV belt needs! These belts are tried and true, torture tested for years. We trust them on all our machines and so should you. They are a much better value than the OEM Polaris belts but probably exceed the performance at the same time. This G-Series Workhorse belt is a perfect replacement and /or performance belt for your machine. The top cogs offer better cooling and the aramid cords make it extremely strong. The Gates G-Force Workhorse 20G4022 has increased strength and reliability. Replaces Polaris part number 3211077. 

    • Up to 2x the life of the G-Force Belt.
    • 45% increased heat tolerance.
    • Power for hauling heavy loads across aggressive terrain
    • Improved durability, crack & wear-resistance.

    FITS THE FOLLOWING MODEL(S):

    1992-’13  Trailblazer 250/330/400’s

    REPLACES POLARIS PART NUMBER(S) 3211077 and 3211048

     

     

    $84.95 $76.46
  • Trailblazer Exhaust Gasket Donut Seal

    This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite.  It is designed to perform even better than the stock Polaris gasket.  Exact replacement for your Polaris.  Most Trailboss and Trailblazers use TWO gaskets total: one between the short head pipe and main pipe and another between the main pipe and the muffler.  Be sure to order 2 if replacing both.  Sold each. Replaces Polaris 5243517.  Fits the following Polaris ATV models:

    2008-13 Trail Blazer 330

    2000-02 Trail Boss

    2003-13 Trail Boss 330

    2000-02 Xpedition 325/425  

    Replaces Polaris 5243517.

    $9.99 $8.99
  • Trailblazer Engine Mounting Nuts (6 PACK)

    Brand new replacement engine mounting nuts for Polaris ATV models. These brand new flange hex flange nuts are brand new replacements for Polaris part number 7547108. These identical replacements are zinc coated for a durable finish and even include the factory applied thread locker on inside of the threads. We sell these nuts in a 6 pack. With many applications and other uses across all the Polaris machines be sure to check with the Polaris parts diagrams. The applications listed below show what machines use these nuts for engine mounting. 

    (Sold as a 6 PACK)

    Check out Quad Logic for all your replacement Polaris hardware needs.

    Fits the following models:

    2001 Worker 500

    1999-01 Xplorer 400

    2000-02 Xpedition 325

    2000-02 Xpedition 425

    2003-13 Trail Boss 330

    2008-13 Trail Blazer 330

    Replaces Polaris Part Number: 7547108

     

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
    Returns are subject to 15% restocking fee.
    $7.95 $7.16
  • Trail Blazer Taillight Lens

    Replace your broken rear taillight lens with this exact replacement. Fits and works just the like expensive factory lens.   Replaces Polaris part number 4032085.  Fits the following Polaris models:

    1996-06 Trailblazer 250

    2008-09 Trailblazer 330

    2003 Trailblazer 400

    1996-99 Sport 400

     


    REPLACES POLARIS PART NUMBER(S): 4032085

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $10.95 $9.86
  • Trail Blazer 250 Magneto Stator

    Complete replacement stator for your Polaris ATV. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part # 3083979. Fits following models listed below.

    1990-2006 Trail Blazer 250

    Replaces Polaris Part Number: 3083979

    $199.95 $179.96
  • Trail Blazer 250 Complete Engine Gasket Set with Seals

    Trail Blazer 250 Complete Engine Gasket Set with Seals includes all the gaskets and seals to completely rebuild the engine of your Polaris 250 two stroke.  Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit.  Includes all of the following gaskets and seals shown in the photo including:

    • Head Gasket
    • Base Gasket
    • Intake Boot O-ring
    • Exhaust Gasket
    • Starter Gasket
    • PTO Oil Seal
    • Mag Oil Seal

    This gasket kit fits the following models:

    1990-2006 Trailblazer 250

    1989-92 Trailboss 250

    1989-92 Big Boss 250

    2000-02 Xplorer 250

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
    $24.95 $22.46
  • Sportsman 500 Water Pump Seal and Oil Seal Kit

    Polaris wants an arm and a leg for this mechanical water pump seal and oil seal. Not here at Quad Logic. We developed this kit to be an exact replacement to the original. If you have a coolant leak or other cooling system problems, its a good idea to replace this seal. Fits all Sportsman 500 engines from 1996 to 2013.

    Replaces Polaris part #3084837.

    $34.95 $31.46
  • Sportsman 500 Water Pump Seal

    Polaris wants an arm and a leg for this mechanical water pump seal. Not here at Quad Logic. We developed this seal to be an exact replacement to the original. If you have a coolant leak or other cooling system problems, its a good idea to replace this seal. Fits all Sportsman 500 engines from 1996 to 2013.

    Replaces Polaris part #3084837.

    $32.95 $29.66
  • Sportsman 500 Water Pump Oil Seal

    We developed these seals to be exact replacements to the original. If you have a coolant leak into the engine or other cooling system problems, its a good idea to replace this crankcase oil seal located directly behind the water pump seal. Fits all 1996-2012 Polaris Sportsman 500’s.

    Replaces Polaris part #3084836.

    $9.95 $8.96
  • Sportsman 500 Top End Gasket Kit

    Kit includes head, base, side cover and exhaust gasket to rebuild the top end of your Polaris 500. Even includes the valve seals! Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following top end gaskets shown in the photo including:

    Head Gasket
    Base Gasket
    Exhaust Gasket
    Cam Cover Gasket
    Water Outlet Gasket
    Valve Seals (4)
    Camshaft Adapter O-ring

    This gasket kit fits the following models:
    1996-13 Polaris Sportsman 500, Xplorer 500, Ranger 500. Magnum 500, and Scrambler 500.

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    $39.95 $35.96
  • Sportsman 500 Stage 1 Engine Tune Up Kit

    If your machine is not running up to its potential, this kit is for you. This Stage 1 kit includes a new air filter, pre-filter, oil filter, and spark plug. These simple to replace components can make a huge improvement in a machine that has been maintenance neglected. These filters are excellent quality replacements and Quad Logic approved. The spark plug is a genuine NGK plug matched for your Sportsman 500. Works on all 1996-2013 Sportsman 500 models.

    This kit includes:
    – Air Filter
    – Water Resistant Pre-filter for the air filter.
    – Oil Filter
    – NGK Spark Plug (BKR6E)

    $44.95 $40.46
  • Sportsman 500 Rocker Cover Head Cover Gasket

    Got oil leaking from the rocker cover? Replace it with this rocker cover gasket from Quad Logic. Any time you remove the rocker (head) cover make sure to install a new gasket! 

    Sold each.  

    Replaces Polaris 3085074.  

    Replacement for all following models:
    2001-05 Sportsman 400
    2008-14 Sportsman 400 HO
    2006-07 Sportsman 450
    1996-13 Sportsman 500

    $14.95 $13.46

Main Menu