• Trailblazer/Trailboss 250 Top End Gasket Kit

    Kit includes head, base, and exhaust gasket to rebuild the top end of your Polaris 250. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following top end gaskets shown in the photo including:

    Head Gasket
    Base Gasket
    Exhaust Gasket

    This gasket kit fits the following models:

    1990-2006 Trailblazer 250

    1989-92 Trailboss 250

    1989-92 Big Boss 250

    2000-02 Xplorer 250

     

    $24.95 $22.46
  • Trailblazer Secondary Clutch Puller

    The secondary clutch is supposed to slide right off the shaft. However, if neglected, the clutch will be rusted onto the shaft and you simply cannot get it off without this puller. Hardened steel puller is plated for corrosion resistance. 5.5″ overall length. Same as Polaris part number 2870913.


    Fits all 1990-2013 Trailblazer 250/330/400 models

    Same as Polaris part number 2870913.

    $24.95 $22.46
  • Trailblazer Primary Clutch Puller

    Brand new primary clutch puller for almost all 1985 and newer Polaris ATV’s and UTV’s using the P85 primary clutch. Hardened steel puller is plated for corrosion resistance. 10.25″ overall length and 3/4″-16 threads. Be sure to use a dab of grease on the end of the puller and threads to properly pull the clutch. Same as Polaris part number 2870506.

    Fits all 1990-2013 Trailblazer 250/330/400 models

    Same as Polaris part number 2870506.

    $24.95 $22.46
  • Trailblazer Primary Clutch Bolt and Washers

    Brand new primary clutch bolt and washers for many single cylinder Polaris ATV and UTV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5210748, 7512566, and 7575202. Includes one clutch bolt, one thick flat washer, and one star type washer. Fits the following models and more:

    1990-2006 Trailblazer 250

    2008-13 Trailblazer 330

    Replaces Polaris Part Number: 5210748, 7512566, and 7575202

    $8.95 $8.06
  • Trailblazer Gates G-Force Workhorse Drive Belt

     

    Quad Logic is now a Gates distributor for all your Polaris ATV and UTV belt needs! These belts are tried and true, torture tested for years. We trust them on all our machines and so should you. They are a much better value than the OEM Polaris belts but probably exceed the performance at the same time. This G-Series Workhorse belt is a perfect replacement and /or performance belt for your machine. The top cogs offer better cooling and the aramid cords make it extremely strong. The Gates G-Force Workhorse 20G4022 has increased strength and reliability. Replaces Polaris part number 3211077. 

    • Up to 2x the life of the G-Force Belt.
    • 45% increased heat tolerance.
    • Power for hauling heavy loads across aggressive terrain
    • Improved durability, crack & wear-resistance.

    FITS THE FOLLOWING MODEL(S):

    1992-’13  Trailblazer 250/330/400’s

    REPLACES POLARIS PART NUMBER(S) 3211077 and 3211048

     

     

    $84.95 $76.46
  • Trailblazer Exhaust Gasket Donut Seal

    This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite.  It is designed to perform even better than the stock Polaris gasket.  Exact replacement for the 1995-02 Scrambler 400, 1996-99 Sport 400, and the 2003 Trail Blazer 400.  The Scrambler/Sport 400 uses TWO of these gaskets total: one one each side of the short headpipe.  Be sure to order 2 if replacing both.  Sold each.  Replaces Polaris 5211592.

    Replaces Polaris Part # 5211592.

    $9.99 $8.99
  • Trailblazer Clutch Intake/Outlet Tube Rubber Boot

    Brand new clutch air intake boot.  Replace that old dried out cracked one with this new one. Depending upon the year this boot fits between the front of the engine/clutch inlet to the vertical plastic clutch inlet tube and/or the clutch cover outlet tube.  Replaces Polaris part number # 5410421. 

    Fits the 1990-03 Trailblazer 250’s.

    $14.95 $13.46
  • Trailblazer Clutch Cover Gasket and Screw Kit

    Replace your leaking clutch cover gasket with this quality replacement gasket from Quad Logic. To make your installation easy we took the time to group these gaskets with new screws into a complete kit! This kit includes 1 Clutch Cover Gasket, 7 Screws

    This kit replaces Polaris part numbers:

    Clutch Cover Gasket, 5521148, 5521160, 5521301, 5525160, 5521578, 5521738

    Screws, 7512094, 7512093, 7512095, 7512093

    This kit works with the following models;

     

    1999 Worker 335

    1999-01 Worker 500

    2000-02 Xplorer 250

    1996-99 Xplorer 300

    1996-02 Xplorer 400

    1997 Xplorer 500

    1996-99 Xpress 300

    1996-97 Xpress 400

    2003 Trail Blazer 400

    1996-02 Trail Boss 250

    2001-02 Trail Boss 325

    1997-02 Trail Blazer 250

    REPLACES POLARIS PART NUMBER(S): 5521148, 5521160, 5521301, 5525160, 5521578, 5521738, 7512094, 7512093, 7512095, 7512093

    $22.95 $20.66
  • Trailblazer Carburetor Rebuild Kit

    A dirty or clogged carb is one of the most common engine running issues. Many times just rebuilding the carb will get you machine running like new again, especially if it has been sitting for some time. This kit includes all new jets, jet needle, needle and seat, float bowl gasket, drain o-ring, fuel screw, and other miscellaneous rebuild components shown.

    This carb rebuild kit works on the 1996-2000 Trail Blazer 250 and 2000 Xplorer 250.

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    $14.95 $13.46
  • Trailblazer Carburetor Needle and Seat

    New replacement needle and seat for your Polaris ATV carburetor.  Includes a new needle, seat, and rubber sealing o-ring.  Installs just like stock to get your fuel flowing properly again.  Replaces Polaris part number 3130495.  Fits the following Polaris two stroke ATV’s:

    1994-97 400L
    1995-01 Scrambler 400
    1994-99 Sport 400
    1996-97 Trailblazer 250
    1995-01 Xplorer 400
    1996-97 Xpress 300/400

    Replaces Polaris 3130495.

    $23.95 $21.56
  • Trailblazer Carburetor Needle & Seat

    New replacement 2.5 needle and seat for your Polaris ATV carburetor.  Includes a new viton tipped needle and brass seat.  Installs just like stock to get your fuel flowing properly again.  Replaces Polaris part number 3130360. Fits the following Polaris two stroke ATV’s and more:

    1990-01 Trailblazer
    1985-99 Trail Boss
    1993-95 250/300/350L models

    1996-97 Sport 400
    1996-01 Xplorer 250/300
    1996-99 Xpress 300/400
    1993-95 250/300/350L models

    Replaces Polaris part number 3130360

    $19.95 $17.96
  • Trailblazer 400 Top End Gasket Set

    Kit includes head gasket, base gasket, reed valve gasket and exhaust gasket to rebuild the top end of your Polaris ATV 400 two stroke.  Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit.  Includes all of the following top end gaskets shown in the photo including:

     

    • Head Gasket  (Replaces Polaris # 3084731)
    • Base Gasket (Replaces Polaris # 3084729)
    • Reed Valve Gasket (Replaces Polaris # 3084148)
    • Exhaust Gasket (Replaces Polaris #3084439, 3086757)

     

    This gasket kit fits the following models:

    1994-95 400L

    1994-97 400L Big Boss

    1995-02 Scrambler 400

    1994-99 Sport 400

    1994-97 Sportsman 400L

    1996-97 Xpress 400

    1995-02 Xplorer 400

    2003 Trail Blazer 400

    $24.95 $22.46
  • Trailblazer 400 (1994-03) Magneto Stator

    Complete replacement stator for your Polaris Trail Blazer, Scrambler, and Sport. This is an excellent quality RM stator brand replacement unit.  All stators are brand new and are ready to plug right in.  These are tested before they are shipped so you know you will not get a defective unit right out of the box.  They use the highest quality windings and lamination material.  Replaces Polaris part #3084785 and 3084788.  Fits all the following Polaris models:

    1996-97 and 03 Trail Blazer 400

    1995-02 Scrambler 400

    1996-99 and 94 Sport 400

    Replaces Polaris part #3084785 and 3084788.

    $199.95 $179.96
  • Trailblazer 250 Rear Brake Pads

    OEM quality pads but at an incredible value. Our new semi metallic REAR brake pads for the Polaris ATV’s are the best of both worlds.  They are designed to offer the best compromise between stopping power and pad life.  These pads offer great braking feel with a higher coefficient of friction. These are the perfect pads for hard riding in all conditions. Sold as a pair for one caliper.

    Fit the following:

    1990-’98 TRAIL BLAZER 250

     

    $14.95 $13.46
  • Trailblazer 250 Primary Clutch Rebuild Kit

    This is a rebuild kit for the spider and sheave on many Polaris ATV primary clutches.  Includes everything shown in the picture such as the pins, narrow style rollers, shims, buttons, clutch cover bushing and movable sheave bushing.  What is NOT included is the spring, weights, and any other components not shown.  Allows you to completely rebuild your worn out spider with a very cost effective kit.  Exact replacement parts for Polaris part numbers 3576504, 1321457, 5430945, 5020422, 3576510 and 5431936.

    Fits all 1990-2006 Trailblazer 250 and 2008-13 Trailblazer 330 models.

    $89.95 $80.96
  • Trailblazer 250 Clutch Outlet Tube Rubber Boot

    Brand new clutch air outlet boot.  Replace that old dried out cracked one with this new one. This boot fits between the clutch cover outlet and plastic tube (near your left leg).  Replaces Polaris part number # 5411489. 

    FITS THE FOLLOWING MODELS(S):

    2002-05 Trail Blazer 330
    2002-05 Trail Boss 330
    1998-99  Big Boss 500
    1999 Worker 335
    1999-01 Worker 500
    2002 Xplorer 400
    2004-05 ATP 330
    2004-05 ATP 500 

     

    REPLACES POLARIS PART NUMBER(S): 5411489

    $11.95 $10.76

Main Menu