• Ranger 700 Bottom End Crankshaft Assembly

    New replacement bottom end crankshaft assembly for your Polaris Ranger 700. Exact replacement and ready to be dropped in to your engine. Does not include main bearings or seals. Replaces Polaris 2203067.

    FITS THE FOLLOWING MODELS:

    2007-’09 Ranger 700

    Replaces Polaris Part Number(s): 2203067

     

    $719.95 $647.96
  • Ranger 700 EFI Crew Throttle Cable

    This new complete throttle cable assembly will install and work just like stock. Heavy vinyl 123″ long housing with inline adjuster. Replaces Polaris part number 7081465. Fit the following Polaris Ranger models:

    2008-09 Ranger 700 EFI Crew (Only Fits Crew)

    Replaces Polaris Part Numbers:7081465

    $34.95 $31.46
  • Ranger 700 Keihin Throttle Position Sensor (TPS)

    New replacement Keihin TPS (Throttle Position Sensor) for your Polaris Ranger 700. Replaces Polaris part numbers 2410342 and 1204715.

    FITS THE FOLLOWING MODELS:
    2005-’09  RANGER 700

     

    REPLACES POLARIS PART NUMBER(S): 2410342 and 1204715

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

     

     

    $24.95 $22.46
  • Ranger 700 Throttle Cable

    This new complete throttle cable assembly will install and work just like stock. Heavy vinyl 90″ long housing with inline adjuster. Replaces Polaris part number 7081247. Fit the following Polaris Ranger models:

    2005-08 Ranger 700 XP (Does NOT fit Crew)
    2006-09 Ranger 700 6×6

    Replaces Polaris Part Numbers: 7081247

    $34.95 $31.46
  • Ranger 800 UTV Mechanical Water Pump Seal and Seal Driver

    We’ve tooled up to offer you a great cost effective replacement to the OEM water pump seal. This seal is made to the exact same specifications as stock so you can be sure it will perform the same and save you money at the same time! Kit also includes our custom seal driver. This particular seal is hard to install because you cannot use a socket. It sits in a pocket that a socket of this size will not fit into. A standard piece of pipe will also not work as there is nothing the correct size. The answer? We took some heavy gauge PVC tubing and machined the ID to fit perfectly over the lip of the seal. Use a big rubber mallet to pound it in perfectly.

    This kit includes both the water pump seal and the matching seal driver.

    Fits the following:

    2006-14 Polaris Ranger 700 and 800’s (Including XP, Crew, and 6×6 models).

    Replaces Polaris part number 3610075.

     

    $49.95 $44.96
  • Ranger 800 Water Pump Rebuild Kit

    We put together a complete water pump rebuild kit for all Polaris 600/700/800 motors. The heart of this kit is our mechanical water pump seal. You can trust our seals to last! Changing the oil seal behind the mechanical seal is a must so we included our viton replacement unit. Installing the mechanical seal can be very tricky so we machined a perfectly sized seal driver to make installation a breeze. Also, our billet water pump impeller will last much longer than the cheap plastic stock impeller. Lastly a new cover o-ring will prevent any leaks. This kit will get you back up and running in no time at a fraction of the cost of dealer parts. Fits the following Polaris models:

    2005-15 Ranger 700 and 800 models (Including XP, 6×6, Crew, and Midsize)

    $99.95 $89.96
  • Ranger Air Filter

    Don’t ignore that dirty air filter. This can rob a ton of power from your Ranger and allow dirt and impurities into the engine. Drop in this new exact replacement filter and your Ranger will thank you. Replaces Polaris part number 7081308. Fits the following models:

    2010-14 Ranger 400 (All)

    2006-13 Ranger 500 (All)

    2006-09 Ranger 700 (All)

    2010 Ranger 800 (All)

    Replaces Polaris Part # 7081308

    $24.95 $22.46

    Ranger Air Filter

    $24.95 $22.46
  • Ranger Fuel Filter

    Replace that cracked, broken or missing fuel pickup with this exact replacement unit. This pickup is located inside the fuel tank and filters out the impurities. Replaces Polaris part number 7052301. Fits the following Ranger models and more:

    Series 10 Ranger

    Series 11 Ranger

    2004-07 Ranger 500 (All)

    2008-09 Ranger 500 (2×4 only)

    2004-06 Ranger TM

    Replaces Polaris part number 7052301

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $9.95 $8.96

    Ranger Fuel Filter

    $9.95 $8.96
  • Ranger Secondary Clutch Bolt and Washers

    Brand new secondary clutch bolt, lock washer and domed washer for the Ranger. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5220646, 7515382, and 7552901. Includes one clutch bolt, one domed washer, and one lock washer. Fits the following Ranger’s:

    2011-14 Ranger 400

    2006-12 Ranger 500

    2006-09 Ranger 700

    2012-14 Ranger 800

    Ranger Series 10 and 11

    Replaces Polaris Part Numbers: 5250562, 7515327, and 7552901

    $8.95 $8.06
  • Renegade 500 800 Heavy Duty Headlight Support Mount

    Did you break the plastic headlight support on your Can-Am Renegade? Quad Logic has your fix! After having this problem on our machines we developed this heavy duty steel replacement. These brackets are laser cut from heavy gauge steel, welded and then powder coated for a life long durable finish. Simply bolt these brackets in place of the factory plastic mounts. To make installation even easier Quad Logic even includes all the necessary hardware! We specifically designed these brackets to fit Gen 1 Renegade 500 and 800 models. (2007-2012) Be sure to check out Quad Logics full line up of Can-am parts and accessories.

     Directly replaces Can-am part numbers 705002424 and 705002425

    This kit includes Left and Right side headlight support brackets and all mounting hardware.

    Fits the following models:

    2007-11 Renegade 800

    2008-12 Renegade 500

    Direct replacement of Can-Am Part Numbers 705002424 and 705002425
    $49.95 $44.96
  • Renegade Front Differential Bearing and Seal Kit

    If your rear diff is making some noise or completely blown, this bearing and seal kit will smooth it out again. These brand new bearings and seals are direct replacements. Includes all the bearings and seals shown to complete the rebuild. Fits the following Can-Am models:

    2008-2015 Renegade 500

    2012 Renegade 500 XT

    2016 Renegade 570 EFI

    2007-2015 Renegade 800

     2016 Renegade 850

    2012-2015 Renegade 1000

    2016 Renegade 1000 XMR

    $79.95 $71.96
  • Roll Pin Punch Tool

    Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:

    Polaris ATV’s from 1993 to Current

    Polaris RZR UTV’s from 2008 to Current

    Polaris Ranger UTV’s from 2003 to Current

    $24.95 $22.46

    Roll Pin Punch Tool

    $24.95 $22.46
  • RZR 800 Adjustable Roll Bar Rollbar Clamp for Accessories

    This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. Even the tension is adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of two ways. There is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.

     

    Fits most 2008 and newer RZR 800, 900, 1000 roll bars.

    $22.95 $20.66
  • RZR 800 Clutch Cover Gasket

    Getting water in your clutches is a major pain and will cause major problems if it happens out on the trail. Replace that worn or torn gasket now.

    Replaces Polaris part number 5521738.

    Fits the following models:
    2008-14 RZR 800 (all)

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $12.95 $11.66
  • RZR 800 Connecting Rod Kit

    Brand new connecting rod kit for all RZR 800 models.   The rod is manufactured from a very durable SCM420 chromoly and double honed on the bearing surfaces.  Includes the lower bearings.  Sold each so order two kits if rebuilding the whole crank.

    Fits all 2008-14 RZR 800 models.

     

    $59.95 $53.96
  • RZR 800 Driveshaft Spring Pin (Roll Pin)

    This spring pin is used in almost all Polaris Ranger and RZR UTV’s from 2003 to 2016 for attaching the driveshafts and prop shafts to the differentials. These can be very difficult to remove and normally get damaged when you pound them out. Be sure to use a new one each time you remove one. Exactly the same as Polaris 7661913. Sold Each.

    $7.95 $7.16

Main Menu