• Ranger Air Filter

    Don’t ignore that dirty air filter. This can rob a ton of power from your Ranger and allow dirt and impurities into the engine. Drop in this new exact replacement filter and your Ranger will thank you. Replaces Polaris part number 7081308. Fits the following models:

    2010-14 Ranger 400 (All)

    2006-13 Ranger 500 (All)

    2006-09 Ranger 700 (All)

    2010 Ranger 800 (All)

    Replaces Polaris Part # 7081308

    $24.95 $22.46

    Ranger Air Filter

    $24.95 $22.46
  • Ranger Black LED Taillight Lens – Pair

    Replace your broken rear taillight lens with this new black taillight replacement. Killer blacked out appearance when off but shines bright red when the brakes are applied!!  Fits and works just the like expensive factory lens. Sold as a pair. Replaces Polaris part number 2411099.

    FIT THE FOLLOWING RANGER MODELS:

    2009-’10 Ranger 500 EFI

    2009 Ranger 700 EFI

    2010-’14 Ranger 800  (Fullsize Models Only)

    2010-’16 Ranger 800 6×6

    2011-’14 Ranger 900 Diesel

    REPLACES POLARIS PART NUMBER(S): 2411099

    $40.95 $36.86
  • Ranger Secondary Clutch Bolt and Washers

    Brand new secondary clutch bolt, lock washer and domed washer for the Ranger. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5220646, 7515382, and 7552901. Includes one clutch bolt, one domed washer, and one lock washer. Fits the following Ranger’s:

    2011-14 Ranger 400

    2006-12 Ranger 500

    2006-09 Ranger 700

    2012-14 Ranger 800

    Ranger Series 10 and 11

    Replaces Polaris Part Numbers: 5250562, 7515327, and 7552901

    $8.95 $8.06
  • Renegade 500 800 Heavy Duty Headlight Support Mount

    Did you break the plastic headlight support on your Can-Am Renegade? Quad Logic has your fix! After having this problem on our machines we developed this heavy duty steel replacement. These brackets are laser cut from heavy gauge steel, welded and then powder coated for a life long durable finish. Simply bolt these brackets in place of the factory plastic mounts. To make installation even easier Quad Logic even includes all the necessary hardware! We specifically designed these brackets to fit Gen 1 Renegade 500 and 800 models. (2007-2012) Be sure to check out Quad Logics full line up of Can-am parts and accessories.

     Directly replaces Can-am part numbers 705002424 and 705002425

    This kit includes Left and Right side headlight support brackets and all mounting hardware.

    Fits the following models:

    2007-11 Renegade 800

    2008-12 Renegade 500

    Direct replacement of Can-Am Part Numbers 705002424 and 705002425
    $49.95 $44.96
  • Renegade Front Differential Bearing and Seal Kit

    If your rear diff is making some noise or completely blown, this bearing and seal kit will smooth it out again. These brand new bearings and seals are direct replacements. Includes all the bearings and seals shown to complete the rebuild. Fits the following Can-Am models:

    2008-2015 Renegade 500

    2012 Renegade 500 XT

    2016 Renegade 570 EFI

    2007-2015 Renegade 800

     2016 Renegade 850

    2012-2015 Renegade 1000

    2016 Renegade 1000 XMR

    $79.95 $71.96
  • Renegade Fuel Pressure Regulator

    Having running or fuel issues with your EFI Can-Am? In many cases the fuel pressure regulator is the culprit. Can-Am will not sell you just the fuel pressure regulator, they make you buy the entire fuel pump assembly as a unit for a ridiculous amount of money. Don’t worry, we have your back. Installs in the stock location just like OEM unit and keeps your fuel pressure at a constant 50-52 PSI. You will only receive the fuel pressure regulator with new o-rings. Sold each. Fits the following models and more:

    2009-15 Can-Am Renegade 500

    2016 Can-Am Renegade 570

    2007-15 Can-Am Renegade 800

    2016 Can-Am Renegade 850

    2012-16 Can-Am Renegade 1000

    $39.95 $35.96
  • Sportsman 500 600 700 800 (2005-10) Body Stickers Decals Graphics Kit

    Give your 2005-10 Polaris Sportsman a makeover with this affordable graphics kit.  Too often your machine with get ripped, torn, or faded graphics over the years that can reduce its appearance and value.  We designed this kit to be an OEM look unlike the other crazy flames, skulls, etc wraps that are out there.  This kit both updates the style and appearance of your machine at a fraction of the cost of OEM graphics.  Includes graphics for both the left and right sides of the machine as well as the handlebar pod.  Heavy gauge 10 mil vinyl is extremely durable for outdoor use and UV resistant as well.  Color neutral black, white, and grey (with a touch of red) will look amazing on any color of machine.  We included all the applicable engine size decals as well so you can pick the correct one for your machine.  Includes all the decals shown in the picture.  Does NOT include any warning decals.

    Will fit all 2005-10 Sportsman 400 (2005 model only), 450, 500, 600, 700 and 800 models.

    $69.95 $62.96
  • Sportsman Ignition Keyswitch Repair Harness Pigtail

    The connectors to the Polaris ATV ignition switches are prone to corroding and preventing the switch from working. Even the tab is brittle so they can easily break off and need to be replaced. Don’t buy the whole wire harness from Polaris!! We have this easy pigtail kit to splice in the new connector. This direct replacement plug fits a huge number of 2002 and newer Polaris ATV models and will get your ignition switch working again. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail. Our pigtail fits perfectly to the ignition switch and has a nice wire sheathing protecting the wires going into the plug. The wires are 6″ long so it can be fixed inside the headlight pod. Sold Each. Includes butt connectors and zip ties. Fits all 6 pin ignition switches such as Polaris part number 4010390, 4011002, 4012165, 4012166. Fits the models listed below and more:

    2008-10 Sportsman 300
    2002-14 Sportsman 400
    2006-18 Sportsman 450
    2002-13 Sportsman 500
    2009-14 Sportsman 550
    2014-18 Sportsman 570
    2003-05 Sportsman 600
    2002-07 Sportsman 700
    2005-14 Sportsman 800
    2009-17 Sportsman 850

    2010-19 Sportsman 850 Touring
    2015-17 Sportsman 1000

    2015-18 Sportsman 1000 Touring
    2015 Sportsman ETX

    Works with Polaris Part Number: 4010390, 4011002, 4012165, 4012166

    $24.95 $22.46
  • Sportsman REAR Brake Caliper Piston

    Replace that corroded caliper piston with this brand new unit from the original brake manufacturer.  This is NOT a reproduction piston.  Long lasting anodized finish. This piston will fit rear caliper part numbers 1910690, 1911075, 1910806.

    FITS THE FOLLOWING MODEL(S): 

     
    2003-05 Sportsman 400
    2006-07 Sportsman 450
    2003-09 Sportsman 500
    2003-05 Sportsman 600
    2002-07 Sportsman 700
    2005-09 Sportsman 800
    2008-13 Sportsman 800 6×6

    This kit will fit Polaris rear caliper part number 1910690, 1911075, 1910806.

    $29.95 $26.96
  • Sportsman Tie Rod End To Spindle Washers (4 PACK)

    Brand new washers for your Polaris Sportsman. These washers are specifically used on the outer tie rod ends of models Polaris Sportsman models. These yellow zinc washers are an exact replacement for Polaris Part number 7556099. 2 washers are used each side of machine, 1 on top of spindle and 1 on the bottom as shown in pictures above. these are sold as a 4 pack so you can replace both sides of the machine.

    This listing is for 4 washers only. No other hardware is included in the listing. Please check out Quad Logic for all your Polaris hardware needs.

    Fits the following models and many more

    2000 Sportsman 335

    2000-19 Sportsman 500

    2001-14 Sportsman 400

    2002-07 Sportsman 700

    2006-14 Sportsman 800

    2014-22 Sportsman 570

    2016-22 Sportsman 450

    2020-22 Sportsman 850

    2020-22 Sportsman 1000

    REPLACES POLARIS PART NUMBER(S): 7556099

    $6.95 $6.26

Main Menu