-
Defender Cab Heater with Defrost
Stay warmer outside longer with a top-quality Can-Am Defender Cab Heater with Defrost for 2016-Current models from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight and includes everything you need to install it into your Can-Am Defender (2016-Current).
It’s built with a SPAL high-performance blower, ensuring longevity and high performance and the fan comes with a 1-year warranty.
Can-Am Defender Inferno Cab Heater Features:
- Direct-fit to your machine and hidden from sight.
- Fits BOTH the Standard and Crew models.
- This kit got an all-new design for 2019! We developed a brand new heater box so we could mount the heater behind the center cubby hole.
- Factory style cubby block off plate included! Allows for easy heater box installation behind the center cubby.
- Unlike the OEM heater, you will not lose the legroom for the 3rd passenger with our set-up!
- Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, ductwork & wiring.
- NEW Pre-thermostat plumbing gives this kit quicker and more consistent heat! Don’t have to pay $100 for a thermostat bypass valve like you do with our competitor’s kits.
- SPAL multi-speed blower. SPAL is the world leader in high-performance fans and blowers, ensuring performance with longevity that is second to none.
- Includes a center Dash Plate for the defrost and body vents.
- The custom multi-speed switch fits right into the dash plate rocker hole.
- Includes Shut-Off Valve.
- 18,000 BTU heater.
About Inferno Heaters:
Inferno™ Cabs Heaters is an OEM and Aftermarket Manufacturer of Cab Heaters for use in a wide range of applications. We take pride in producing top quality products that we manufacture right here in the USA. All of our cab heaters come equipped with a SPAL blower and an aluminum heater core, meaning Inferno™ Cab Heaters are built with components that stand above our competition. This is the highest quality and most heavy-duty heater on the market, you will not be disappointed.
We made our mark as a producer of OEM-quality aftermarket cab heating kits for the UTV market. Nobody offers a full line of hidden direct-fit UTV heaters like the Inferno™ line of cab heaters. We bring in each machine and customize a heater that fits ONLY that machine. We design our heaters to be friendly to install and out of sight, making sure you have the cleanest and best-looking heater setup available. Our cab heater kits include all components needed for a complete installation to your machine. Take your UTV to the next level today and purchase an Inferno™ Cab Heater!
*Depending on the time of the year there maybe a 1-2 week lead time when demand is heavy*
$429.95 – $449.95
$386.96 – $404.96Defender Cab Heater with Defrost
$429.95 – $449.95
$386.96 – $404.96 -
Maverick/ Maverick Sport and Trail Cab Heater with Defrost
Stay warmer outside longer with a top-quality Can-Am Maverick Cab Heater with Defrost from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight and includes everything you need to install it into your Can-Am Maverick.
It’s built with a SPAL high-performance blower, ensuring longevity and high performance and the fan comes with a 1-year warranty.
Can-Am Maverick Inferno Cab Heater Features:
- Direct-fit to your machine and hidden from sight.
- Fits BOTH the Standard and Crew models.
- Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, ductwork & wiring.
- SPAL multi-speed blower. SPAL is the world leader in high-performance fans and blowers, ensuring performance with longevity that is second to none.
- Includes custom multi-speed switch.
- 18,000 BTU heater.
About Inferno Heaters:
Inferno™ Cabs Heaters is an OEM and Aftermarket Manufacturer of Cab Heaters for use in a wide range of applications. We take pride in producing top quality products that we manufacture right here in the USA. All of our cab heaters come equipped with a SPAL blower and an aluminum heater core, meaning Inferno™ Cab Heaters are built with components that stand above our competition. This is the highest quality and most heavy-duty heater on the market, you will not be disappointed.
We made our mark as a producer of OEM-quality aftermarket cab heating kits for the UTV market. Nobody offers a full line of hidden direct-fit UTV heaters like the Inferno™ line of cab heaters. We bring in each machine and customize a heater that fits ONLY that machine. We design our heaters to be friendly to install and out of sight, making sure you have the cleanest and best-looking heater setup available. Our cab heater kits include all components needed for a complete installation to your machine. Take your UTV to the next level today and purchase an Inferno™ Cab Heater!
*Depending on the time of the year there maybe a 1-2 week lead time when demand is heavy*
$429.95
$386.96Maverick/ Maverick Sport and Trail Cab Heater with Defrost
$429.95
$386.96 -
Maverick X3 Cab Heater with Defrost
Stay warmer outside longer with a top-quality Can-Am Maverick X3 Cab Heater with Defrost for 2017-current models from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight and includes everything you need to install it into your Can-Am Maverick X3 (2017-current).
This is a premium upgrade that is included in the kit at only $399! There are very few panels that need to be removed, this is a huge benefit over our competitor’s kits where you have to tear apart the majority of the front end of the machine.
It’s built with a SPAL high-performance blower, ensuring longevity and high performance and the fan comes with a 1-year warranty.
Can-Am Maverick X3 Inferno Cab Heater Features:
- Direct-fit to your machine and hidden from sight.
- Kit includes an in-dash enclosure that hides the kit from sight.
- Fits BOTH the Standard and Crew models.
- Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, ductwork & wiring.
- SPAL multi-speed blower. SPAL is the world leader in high-performance fans and blowers, ensuring performance with longevity that is second to none.
- Includes custom multi-speed switch.
- Includes Shut-Off Valve
- 18,000 BTU heater.
About Inferno Heaters:
Inferno™ Cabs Heaters is an OEM and Aftermarket Manufacturer of Cab Heaters for use in a wide range of applications. We take pride in producing top quality products that we manufacture right here in the USA. All of our cab heaters come equipped with a SPAL blower and an aluminum heater core, meaning Inferno™ Cab Heaters are built with components that stand above our competition. This is the highest quality and most heavy-duty heater on the market, you will not be disappointed.
We made our mark as a producer of OEM-quality aftermarket cab heating kits for the UTV market. Nobody offers a full line of hidden direct-fit UTV heaters like the Inferno™ line of cab heaters. We bring in each machine and customize a heater that fits ONLY that machine. We design our heaters to be friendly to install and out of sight, making sure you have the cleanest and best-looking heater setup available. Our cab heater kits include all components needed for a complete installation to your machine. Take your UTV to the next level today and purchase an Inferno™ Cab Heater!
*Depending on the time of the year there maybe a 1-2 week lead time when demand is heavy*
$429.95
$386.96Maverick X3 Cab Heater with Defrost
$429.95
$386.96 -
Gen 2 Can-Am Outlander Steel Footwells
Quad Logic now offers these heavy duty steel footwells for Gen 2 Can-Am Outlanders! After years of success producing aftermarket Polaris footwells we decided to design our own Can-Am footwells. Our design is the perfect combination for aggressive mud riding as well as trail riding. With so many basic flat steel options available our design team made these to both look amazing and allow you to run up to most 32″ tires. These footwells are fabricated locally right here in Minnesota. With Quad Logic there’s no need to wait on a built to order set of footwells with extended lead times. We keep these parts in stock and ready to ship so you can have your parts in a couple days instead of a couple weeks! These footwells come powder coated black and ready for the quick bolt on installation. Our footwells use the original aluminum foot pegs off of your stock footwells. Replaces Can-Am Part Number(s): 705007040, 705007039, 705003427 and 705003426.
These footwells fit the Gen 2 Outlanders. (Do NOT fit Gen 1 – 2011 and older)
Fits The Following Models;
2012-2022 Outlander 450, 500, 570, 650, 800, 850 and 1000 (All models except MAX)
***DOES NOT FIT OUTLANDER MAX MODELS
NOTE: Due to the excessive size/shape of these footwells it is possible they will get some small scratches or scuffs during shipping. We do package them very well but the shipping companies are rough with them. If you are looking for show quality, please do not order. They will arrive in good condition and hopefully perfect but we cannot guarantee there will not be some small scratches/scuffs. If so, they can easily be fixed up with some touch-up paint. Thank you.
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$199.95 – $399.95
$179.96 – $359.96 -
Can-Am Maverick X3 (2017-21) Black LED Headlights (PAIR)
Have a fender bender or hit a tree? Replace your broken X3 headlights with these exact LED replacement headlights. Clear lenses with black inner housings look great and are crazy bright.
Sold as a PAIR.
Replaces Can-am part numbers 710004658 and 710004659.
These fit all packages and years of Maverick X3 from 2017-2021.
$319.95$287.96Can-Am Maverick X3 (2017-21) Black LED Headlights (PAIR)
$319.95$287.96 -
Can-Am Renegade 570 Magneto Stator
Replace that weak or burnt out stator with this brand new replacement unit. Unbolt and unplug the old stator and plug and bolt this one in. It’s that simple.
FITS THE FOLLOWING MODEL(S):
2018-’23 Renegade 1000 2016-’23 Renegade 1000R 2019-’22 Renegade 570 2018-’23 Renegade 650 2019-’22 Renegade 850 ALSO FITS….
2013 Commander 1000 2013 Commander 800R Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$199.95$179.96Can-Am Renegade 570 Magneto Stator
$199.95$179.96 -
$190.00$95.00 -
Universal 8Pod RGB Rock Light Accessory Kit
Add some glow to your ATV or UTV with this 8 Pod Rock Light Kit! The universal installation makes it easy to install on any machine with a 12 volt battery. Use them for accent light in the wheel wells, under the dash, as a dome light, reverse lights, etc. You can literally put these lights wherever you want. Everything is included so the installation is easy to do and the lights are Bluetooth controlled by a simple phone app. You can do virtually any color along with flashing or even set to the beat of your music!
Highlighted features of these lights:
– 6 high powered LED chips per light for the brightest display!
– Cast aluminum housing. Forget about those cheap plastic ones that crack.
– IP68 waterproof rating. Go deep or go home.
– Stainless mounting hardware. It’s the details that count.
– IOS and android compatible app.
– Detailed instructions in proper english, not the poor quality instructions from the other sellers.
– Millions of RGB light combinations.
– Low power draw. We know you probably have other powered accessories as well.These are the strongest, best looking, most versatile rock lights on the market! This kit includes the controller box, 4 pod lights with 10′ wires, mounting hardware, and instructions.
NOTE: The phone shown in the picture is NOT included. You must use your own phone to operate the app.
$189.95$170.96Universal 8Pod RGB Rock Light Accessory Kit
$189.95$170.96 -
Can-Am Outlander Clutch Cover
Crack your clutch cover? Replace it before your clutches get wet and leave you stranded on the trail. Quad Logic now offers the quality replacement clutch covers for Can-Am Outlander models. These cover simply bolt on in place of the factory cover. While replacing your clutch cover make sure to check out our other listings for complete clutch cover gaskets, screws and drain plug kits.
FITS THE FOLLOWING MODEL(S):
2007-’17 Outlander 500 2016-’23 Outlander 570 2006-’23 Outlander 650 2006-’15 Outlander 800 2016-’23 Outlander 850 2012-’23 Outlander 1000 ALSO FITS….
2011-’14 Commander 800 2011-’17 Commander 1000
REPLACES CAN-AM PART NUMBER(S): 420611397, 420611395, 420611393, 420611391 and 420611390We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$189.95$170.96Can-Am Outlander Clutch Cover
$189.95$170.96 -
Can-Am Renegade Front Brake Calipers
Is your caliper stuck, broke, or simply worn out? Don’t go to the dealer! This caliper is an exact reproduction of the OEM unit. After bolting on your brake line simply threads into the fitting on the back. Bleed it out and you are ready to go at a fraction of the dealer price. This caliper comes ready to use, it even includes new semi metallic brake pads.
FITS THE FOLLOWING MODELS:
2014-’15 RENEGADE 500 2016-’22 RENEGADE 570 2016-’22 RENEGADE 650 2014-’15 RENEGADE 800 2016-’22 RENEGADE 850 2014-’22 RENEGADE 1000 REPLACES CAN-AM PART NUMBER(S): 705600861 & 705600862
$89.95 – $174.95
$80.96 – $157.46 -
Can-Am Renegade Low Beam Headlight Assembly
Replace your burnt out headlight with a replacement low beam headlight assembly from Quad Logic. This headlight assembly replaces Can-Am part number(s): 710000703, 710001325 and 710006176. Sold individually or a pair.
FITS THE FOLLOWING CAN-AM MODELS:
2008-’11 Renegade 500 2018, ’21-’22 Renegade 570 2018-’22 Renegade 650 Models 2007-’11 Renegade 800 2018-’22 Renegade 850 2018-’22 Renegade 1000 Models 2011 Commander 800 2011 Commander 1000 REPLACES CAN-AM NUMBER(S): 710000703, 710001325 and 710006176
$89.95 – $168.95
$80.96 – $152.06 -
Can-Am Maverick Clutch Cover
Crack your clutch cover? Replace it before your clutches get wet and leave you stranded on the trail. Quad Logic now offers the quality replacement clutch covers for Can-Am Maverick models. These cover simply bolt on in place of the factory cover. While replacing your clutch cover make sure to check out our other listings for complete clutch cover gaskets, screws and drain plug kits.
FITS THE FOLLOWING MODEL(S):
2013-’14 MAVERICK 1000 ALSO FITS….
2014 COMMANDER MAX 1000
REPLACES CAN-AM PART NUMBER(S): 420612312 and 420612313We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$154.95$139.46Can-Am Maverick Clutch Cover
$154.95$139.46 -
Maverick X3, 800 & 1000 (2016-2020) Billet Thermostat Housing
Replace your OEM thermostat housing with this billet aluminum Quad Logic version. When you get them from the factory you can’t change the thermostat without changing the whole housing. With our product you can easily remove or replace your thermostat if it ever goes out. Great product for people who want to run a cooler temp thermostat, thermostat delete or just like being able to change your thermostat out if it ever goes bad. Easily installs right where the factory thermostat housing does. All hardware is included.
FITS THE FOLLOWING MODEL(S):
2016-’19 Defender HD10 2016-’19 Defender HD8 2018-’20 Maverick 1000 2018-’20 Maverick 800 2018 Maverick 900 HO 2017-’20 Maverick X3 2017-’19 Traxter HD10 2016-’19 Traxter HD8 REPLACES CAN-AM PART NUMBER(S): 709200581
$149.95$134.96Maverick X3, 800 & 1000 (2016-2020) Billet Thermostat Housing
$149.95$134.96 -
Can-Am Outlander Magneto Stator
Replace that weak or burnt out stator with this brand new replacement unit. Just unbolt and unplug the old stator and put this one in. All the wires will plug right in. Fits all the following models:
2011-2015 Outlander 500
2011-2019 Outlander 650
2011-2015 Outlander 800
2015-2019 Outlander 850
2012-2018 Outlander 1000
Replaces Can-Am Part Number: 420685632, 420685631, 420685632, 420685630
$149.95$134.96Can-Am Outlander Magneto Stator
$149.95$134.96 -
Can-Am Outlander (Std. Model) ATV Magneto Stator
Complete replacement stator Can-Am Outlander. This is an excellent quality RM stator brand replacement unit. All stators are brand new and are ready to plug right in.
Please make sure that you compare your old stator to the one pictured above as Can-Am has used multiple stators depending upon the model (XT, XMR, etc). This stator is generally used for STANDARD PACKAGE MODELS (NOT XT) but may be used on others. Please compare the photos and part numbers before ordering!!!
Replaces Can-Am part numbers 420296907, 420684850, and 420685920. Has been shown to fit at least one chassis package in the following models:
2003-14 Outlander 400
2007-15 Outlander 500
2006-16 Outlander 650
2006-15 Outlander 800
2012 Outlander 1000-Also fits some 2016+ Outlander 450, 570, and 650 models.
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$149.95$134.96Can-Am Outlander (Std. Model) ATV Magneto Stator
$149.95$134.96 -
Can-Am Maverick (2013-2018) Fuel Pump Assembly
Changing out the fuel pumps in these modules can be tricky. Then there is still a possibility that the regulator is bad or there is some other issue. Forget all that and just drop in this complete fuel pump assembly. Its fully assembled so you just drop it in the tank and plug it in! If you are having poor idling, sputtering, cutting out at high speeds or other running issues, this could be your fix. This automotive quality fuel pump is an exact replacement. Installs in the stock location and will maintain the proper operation and life of your fuel system. Replaces Can-Am part number(s): 709000759, 709000362 and 709000270.
FITS THE FOLLOWING MODELS:
2013-’18 MAVERICK 1000 2014-’18 MAVERICK MAX 1000 ALSO FITS THE FOLLOWING MODEL(S):
2011-’20 COMMANDER 1000 2011-’20 COMMANDER 800 2015-’20 COMMANDER MAX 1000 2018-’20 COMMANDER MAX 800R
POLARIS PART NUMBER(S): 709000759, 709000362 and 709000270We make every attempt to ensure every item fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$149.95$134.96Can-Am Maverick (2013-2018) Fuel Pump Assembly
$149.95$134.96
- HOME
- Quad-Logic ATV Parts
- POLARIS RZR PARTS AND ACCESSORIES
- Polaris RZR 570 Parts and Accessories
- Polaris RZR 800 Parts and Accessories
- Polaris RZR 900 XP Parts and Accessories
- Polaris RZR 1000 XP Parts and Accessories
- Polaris RZR 1000 S Parts and Accessories
- Polaris RZR 900 Trail/XC/S Parts and Accessories
- RS1 Parts and Accessories
- RZR PRO XP
- Polaris RZR Turbo Parts and Accessories
- POLARIS RANGER PARTS AND ACCESSORIES
- POLARIS ATV PARTS AND ACCESSORIES
- Sportsman 400
- Polaris Sportsman 500 Parts and Accessories
- Polaris Sportsman 570 Parts and Accessories
- Polaris Sportsman 600 Parts and Accessories
- Polaris Sportsman 700 Parts and Accessories
- Polaris Sportsman 800 Parts and Accessories
- Polaris Sportsman 550/850/1000 XP Parts and Accessories
- Polaris Scrambler 500 Parts and Accessories
- Polaris Scrambler 850/1000 Parts and Accessories
- Polaris Trailblazer Parts and Accessories
- Polaris Magnum Parts and Accessories
- Polaris Ace Parts and Accessories
- CAN-AM PARTS AND ACCESSORIES
- POLARIS RZR PARTS AND ACCESSORIES
- ATV
- UTV
- SNOWMOBILE
- MOTORCYCLE
- LAWN & GARDEN
- Small Engine Parts
- 50% OFF PRODUCTS
- Checkout