-
Ranger 900 Accessory Frame Tube End Cap Plug Kit
This neat plug kit finished off the unsightly open frame tubes in your Ranger. The frame tubes fill up with water and mud then start rusting out right away. These plugs simply pound into place with your hand or a rubber mallet and give that professional fit and finish look. Keep your frame tubes clean and rust free with this simple kit! Fits all Ranger 900 XP models from 2013 to current. Not sure if it also fits the Crew model as we are still looking into it. Includes FOUR frame plugs.
$19.95$17.96Ranger 900 Accessory Frame Tube End Cap Plug Kit
$19.95$17.96 -
Ranger 900 Coated Tailgate Cable
Exact replacement stainless steel tailgate cable for many Polaris Ranger models. This cable is a direct fit, it will install just like the original and is the same 10-3/8″ overall length. Has one looped cable end and one steel end with a hole. One key feature over the stock cable is there there is a heavy duty PVC coating over this cable. This extends the cable life, looks better for a much longer period, and will not allow the cable to fray like the stock uncoated cables! It is even MADE in the USA! Fits either left or right side. Sold EACH. Replaces Polaris part number 7081925. Fits the following Polaris Ranger Models:
2014-18 Ranger 900 (XP and Crew Models)
Replacement for the Polaris 7081925
$19.95$17.96Ranger 900 Coated Tailgate Cable
$19.95$17.96 -
Ranger Body Panel Torx Screw and Flat Nut (Set of 6)
Brand new flat nut used on many 2014 and newer Polaris Ranger, RZR and ACE models to mount different body panels, fender flares, plastic, etc. Exact replacement for Polaris 7547674. Black zinc plating. This is for a set of 6 flat nuts.
Exact replacement for Polaris # 7547674
$10.95$9.86Ranger Body Panel Torx Screw and Flat Nut (Set of 6)
$10.95$9.86 -
Ranger Side Safety Window Net Buckle Clips 2″
Exact replacement 2″ net buckle for many 2015 and newer Rangers. This is a direct replacement from the original manufacturer. This is used on the front of the nets where it clips into the bracket on the roll cage. Just the male buckle shown is included. Many fit other years and models as well, just compare your old buckle to the photo.
$8.95$8.06Ranger Side Safety Window Net Buckle Clips 2″
$8.95$8.06 -
RZR 1000 XP Front Tow Hook
This is a very heavy duty front tow hook for most Polaris RZR models. Thick plate steel construction with dual reinforcements make this a very over-built tow hook! Aggressive design and beefy five point mounting make this a must have accessory. We designed it not to stick out too far from the machine but still have the capability of using either a tow strap or winch hook for towing. Mounts below the winch area so it normally will not interfere if you have a winch mounted. Will NOT fit with most front bumpers.
Installation is simple and we include the mounting hardware and instructions. Black powder coated finish will look great for years. These tow hooks are made here in the USA!! Please support local manufacturing. This hitch will fit the following models:2014-18 RZR 1000 (All Models)
2016-18 RZR Turbo$39.95$35.96RZR 1000 XP Front Tow Hook
$39.95$35.96 -
RZR 800 Adjustable Roll Bar Rollbar Clamp for Accessories
This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. Even the tension is adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of two ways. There is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
Fits most 2008 and newer RZR 800, 900, 1000 roll bars.
$22.95$20.66 -
RZR Seat Belt Harness Pass Through Bezel (INDIVIDUAL)
These plastic seat bezel allow for the installation of 4 or 5 point harnesses in your factory seat by allowing the top straps to go through the back of the seat ensuring a safe proper fitment of the harness.
Fits most Polaris RZR and General models.
This plastic bezel will offer a smooth clean look to your seat after they are installed.
Installation will require some work and cutting the factory seats. We include detailed installation instructions.
Sold as Each.
Fits the following Polaris models:
2015-21 RZR 900 (All)
2014-21 RZR 1000 (All)
2016-21 RZR Turbo (All, Except Pro-XP)
2018-21 RZR RS1Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$24.95$22.46RZR Seat Belt Harness Pass Through Bezel (INDIVIDUAL)
$24.95$22.46 -
RZR Turbo 1/4 Turn Hood Latch and Rubber Gromment Kit
Replacement quarter turn latch and rubber grommet kit for RZR Turbo hoods. Replaces Polaris part number 5439798, 5413428. Fits the following Polaris models:
2016-18 RZR XP Turbo (Including 4 Seater)
Replaces Polaris Part Number: 5439798, 5413428
$14.95$13.46RZR Turbo 1/4 Turn Hood Latch and Rubber Gromment Kit
$14.95$13.46 -
RZR Turbo Exhaust Aluminum Heat Shield
Add some style to your RZR turbo while keeping heat under control. This aluminum heat shield has a very military inspired fluted barrel design! Full three sided protection around the main headpipe (behind the rear tire). Not only does it protect your shock and plastic from heat, it also protects the exhaust from flying rocks and debris. The gun barrel look sets your machine apart from the rest! Black powdercoated finish. Simple installation. Fits all 2016-18 RZR Turbo models.
2016-22 RZR Turbo
$114.95$103.46RZR Turbo Exhaust Aluminum Heat Shield
$114.95$103.46 -
RZR Turbo Smoke Center LED Tail Light
Murder out your center taillight with this dark smoked LED. Looks black when not on but lights up bright red when you hit the brakes. This is a full LED replacement unit, not just a lens covering. Fits and works just the like expensive factory lens.
Replaces Polaris part number 2413431. Can be added to some models that did not come with the center taillight from the factory.
Fits the following models:
2018-20 RZR Turbo “S”Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$79.95$71.96RZR Turbo Smoke Center LED Tail Light
$79.95$71.96 -
RZR Turbo Winch Mount Kit
Heavy gauge steel Winch Mount Kit specific for your Polaris RZR 900/1000 models. Kit provides the hardware necessary to mount a winch to your Polaris and are designed to fit Cycle Country, Kolpin & other branded aftermarket winches.Fits the following models;2016-21 RZR Turbo (All Models except Turbo S)
Sturdy line of winch mount kit provides the hardware necessary to mount a winch to your vehicle
Designed to fit Kolpin and other branded aftermarket winches with common bolt patterns
Made with heavy gauge steel
Powder coat paint protectionWe make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$69.99$62.99RZR Turbo Winch Mount Kit
$69.99$62.99 -
RZR XP Turbo 1/4 Turn Hood Latch
Replacement quarter turn latch for RZR Turbo hoods. Replaces Polaris part number 5439798. Fits the following Polaris models:
2016-18 RZR XP Turbo (Including 4 Seater)
Replaces Polaris Part Number: 5439798
$8.95$8.06RZR XP Turbo 1/4 Turn Hood Latch
$8.95$8.06 -
Scrambler 850/1000 Quick Release Dzus Fastener Side Panel Hardware Kit
It’s very frustrating that Polaris has stooped to using those cheap plastic rivets to attach body panels on their ATV’s. Not only do they break or loosen up over time but you need a special pliers to remove them. The Scrambler 850/1000 side panels are held on with these plastic rivets, what are you to do if you have an engine issue out on the trail and you don’t have tools to remove them? Who wants to grab special pliers to remove the side panels every time you wash it?
We are problem solvers here at Quad Logic and like to make your life easier. We developed this super trick Dzus fastener kit to easily remove your side panels without tools! They are also much stronger and will not break like the plastic rivets. After some simple installation, all it takes is a quarter turn of the fasteners and the side panel can be removed or installed. Don’t worry about dropping or losing any hardware either, it all stays attached to the side panels!
This kit includes everything you need to install it on both side panels including instructions. Definitely recommended for all Scrambler 850/1000 owners!FITS THE FOLLOWING MODELS:
2013-’22 Scrambler 850
2014-’22 Scrambler 1000$39.95$35.96 -
Scrambler XP BILLET Front Storage Rack Latch
We designed our own 6061 billet aluminum latch assembly for the newer Sportsman and Scrambler front racks. This latch is virtually unbreakable and looks amazing on the machine. Get rid of those flimsy stock plastic latches that break! Both the latch and the shaft are billet aluminum in this assembly. A black anodized finish with an engraved Quad Logic logo looks awesome. We use a strong shoulder bolt to hold the two together and we also include a new spacer and bushing for a complete installation! Installs and works just like the original. Replaces Polaris part numbers 5438117, 5438118, 5413887, 5521796.
Sold each so order two if replacing both latches.
Fits the following models:
2013-21 Scrambler 850
2014-21 Scrambler 1000Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$29.95$26.96Scrambler XP BILLET Front Storage Rack Latch
$29.95$26.96 -
Scrambler XP Rear Storage Compartment Rubber Strap
Exact replacement rubber rear storage cover strap for the Scrambler 850/1000. Replaces Polaris part number 5438262. Sold Each. Fits the following models:
2014-21 Scrambler 850
2014-21 Scrambler 1000
Replaces Polaris part number 5438262
$7.95$7.16 -
Sportsman 450 570 STEEL Footwell Floorboards LEFT SIDE
You’ve asked for them and now they are ready! Following our popular older Style sportsman steel footwells, these are the new Sportsman 450/570 footwells! The fit and finish is fantastic on these footwells, the lines match perfectly and they look like OEM equipment. These floorboards are manufactured from lasered sheet steel then formed to fit the contour of your fenders. We even put tabs on the backside to hold your plastic in place. We even kept the nice footpegs that run from side to side! Lastly they are finished in a beautiful black texture powdercoat for a long lasting finish. This special powdercoat is VERY grippy, it feels like grip tape so your boots will not slide around in the floorboards. Plastic does not belong on an ATV! Fix yours for good with these new steel footwells. Fits similar to stock, you can re-use most the original hardware and we add some hardware to finish it off. Includes Left floorboards. Replaces Polaris part number 5450523-070
Fits all 2014-19 standard chassis Sportsman 450 and 570 including EPS and SP models.
NOTE: Due to the excessive size/shape of these footwells it is possible they will get some small scratches or scuffs during shipping. We do package them very well but the shipping companies are rough with them. If you are looking for show quality, please do not order. They will arrive in good condition and hopefully perfect but we cannot guarantee there will not be some small scratches/scuffs. If so, they can easily be fixed up with some touch-up paint. Thank you.
Replaces Polaris Part Number: 5450523-070
$199.95$179.96Sportsman 450 570 STEEL Footwell Floorboards LEFT SIDE
$199.95$179.96
- HOME
- Quad-Logic ATV Parts
- POLARIS RZR PARTS AND ACCESSORIES
- Polaris RZR 570 Parts and Accessories
- Polaris RZR 800 Parts and Accessories
- Polaris RZR 900 XP Parts and Accessories
- Polaris RZR 1000 XP Parts and Accessories
- Polaris RZR 1000 S Parts and Accessories
- Polaris RZR 900 Trail/XC/S Parts and Accessories
- RS1 Parts and Accessories
- RZR PRO XP
- Polaris RZR Turbo Parts and Accessories
- POLARIS RANGER PARTS AND ACCESSORIES
- POLARIS ATV PARTS AND ACCESSORIES
- Sportsman 400
- Polaris Sportsman 500 Parts and Accessories
- Polaris Sportsman 570 Parts and Accessories
- Polaris Sportsman 600 Parts and Accessories
- Polaris Sportsman 700 Parts and Accessories
- Polaris Sportsman 800 Parts and Accessories
- Polaris Sportsman 550/850/1000 XP Parts and Accessories
- Polaris Scrambler 500 Parts and Accessories
- Polaris Scrambler 850/1000 Parts and Accessories
- Polaris Trailblazer Parts and Accessories
- Polaris Magnum Parts and Accessories
- Polaris Ace Parts and Accessories
- CAN-AM PARTS AND ACCESSORIES
- POLARIS RZR PARTS AND ACCESSORIES
- ATV
- UTV
- SNOWMOBILE
- MOTORCYCLE
- LAWN & GARDEN
- Small Engine Parts
- 50% OFF PRODUCTS
- Checkout