-
Sportsman 400 Front Strut Wheel Bearing Driver Press Tool
Changing your wheel bearings can be a real pain without the correct tools. Get the job done fast and correctly using this Torpedo installation and removal tool set by Quad Logic. We developed this tool to both remove and install the FRONT STRUT wheel bearings from your Sportsman and Rangers. It includes a holder for the hub and then a driver to press the old bearing out of the hub. Once removed, flip over the hub and driver and press in the new bearing. The dual sided driver/installer torpedo tool works for both! Designed to work with wheel bearing part number: 3514634. ONLY WORKS ON MODELS WITH FRONT STRUT STYLE SUSPENSION.
Fits the following models and more:
2005-14 Sportsman 400
Works with Polaris Part Number: 3514634
$59.95$53.96 -
Scrambler XP Ball Joint Install & Removal Tool
Replacing the ball joints from the a-arms on most Polaris machines can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel tool set is designed to both remove and install the ball joint using any standard shop press without damaging the a-arm or ball joint.
The kit starts with our holder tool. This uniquely sized tube is welded to a nice baseplate for a secure footprint. The holder tool fits perfectly in the groove of the a-arm around the balljoint. Simply set the a-arm in place over the holder tool and press the old ball joint out. It will drop out of the a-arm and into the holder tool.
To install the new balljoints simply flip the a-arm over on the holding tool, put the new balljoint in place, use the install tool on top of the balljoint, and press into place. The install tool pushes against the edge of the balljoint so you do not dimple or damage the center. Very simple and no damage to paint or powdercoat.
Both tools are zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
2013-21 Scrambler 850
2014-19 Scrambler 1000Works with Polaris Part Number: 7061220, 7061187, 7081505, 7081580, and 7081666
$39.95$35.96Scrambler XP Ball Joint Install & Removal Tool
$39.95$35.96 -
Scrambler 500 Choke Cable Fitting Removal Tool
If you have removed the carburetor on a Polaris ATV you will understand the importance of this NEW tool from Quad Logic! Mikuni 34mm Carburetors didn’t leave any room for a typical wrench to remove the choke cable fitting. This leaves very few options to successfully remove the choke cable with out damaging the brass fitting. We know the pain and fight these daily so we developed this very simple but very effective wrench to make your Polaris carburetor repair fast and simple! These custom made tools are precision cut for a perfect fit and zinc coated to prevent rust. This tool works to remove the choke cable fitting on most Polaris 34mm and 40mm carburetors from 1996 – 2013.
FITS THE FOLLOWING MODELS WITH 34mm – 40mm MIKUNI CARBURETORS:
1997-’12 Scrambler 500 We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.$22.95$20.66Scrambler 500 Choke Cable Fitting Removal Tool
$22.95$20.66 -
RZR 900 Wheel Bearing Install/Removal Press Tool
Changing your wheel bearings can be a real pain without the correct tools. Get the job done fast and correctly using this Torpedo installation and removal tool set by Quad Logic. We developed this tool to both remove and install the FRONT or REAR wheel bearings from your RZR. It includes a holder for the hub and then a driver to press the old bearing out of the hub. Once removed, flip over the hub and driver and press in the new bearing. The dual sided driver/installer torpedo tool works for both! Fits the following models and more:
2011-19 RZR 900 (All models, front and rear bearings)
$49.95$44.96RZR 900 Wheel Bearing Install/Removal Press Tool
$49.95$44.96 -
RZR 800 REAR Wheel Bearing Install/Removal Press Tool
Changing your rear wheel bearings can be a real pain without the correct tools. Get the job done fast and correctly using this Torpedo installation and removal tool set by Quad Logic. We developed this tool to both remove and install the REAR wheel bearings from your RZR. It includes a holder for the hub and then a driver to press the old bearing out of the hub. Once removed, flip over the hub and driver and press in the new bearing. The dual sided driver/installer torpedo tool works for both! Fits the following models and more:
All 2008-14 RZR 800 (Rear Wheel bearings).
$49.95$44.96RZR 800 REAR Wheel Bearing Install/Removal Press Tool
$49.95$44.96 -
RZR 1000 Ball Joint Install and Removal Tool
Replacing the ball joints from the a-arms on most Polaris machines can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel tool set is designed to both remove and install the ball joint using any standard shop press without damaging the a-arm or ball joint.
The kit starts with our holder tool. This uniquely sized tube is welded to a nice baseplate for a secure footprint. The holder tool fits perfectly in the groove of the a-arm around the balljoint. Simply set the a-arm in place over the holder tool and press the old ball joint out. It will drop out of the a-arm and into the holder tool.
To install the new balljoints simply flip the a-arm over on the holding tool, put the new balljoint in place, use the install tool on top of the balljoint, and press into place. The install tool pushes against the edge of the balljoint so you do not dimple or damage the center. Very simple and no damage to paint or powdercoat.
Both tools are zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
WILL NOT WORK WITH NEW OEM POLARIS BALLJOINT PART #7082422
2014-20 RZR 1000 XP (All models)
Work with Polaris Part Number: 7061220, 7061187, 7081505, 7081580, and 7081666$44.95$40.46RZR 1000 Ball Joint Install and Removal Tool
$44.95$40.46 -
Roll Pin Punch Tool
Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:
Polaris ATV’s from 1993 to Current
Polaris RZR UTV’s from 2008 to Current
Polaris Ranger UTV’s from 2003 to Current
$24.95$22.46Roll Pin Punch Tool
$24.95$22.46 -
-
-
-
-
$10.98$5.49Oil Filter Wrench – Deluxe, Adjustable
$10.98$5.49 -
-
-
-
$6.75$3.38Standard Duty Racer Tape, 90ft – Silver
$6.75$3.38
- HOME
- Quad-Logic ATV Parts
- POLARIS RZR PARTS AND ACCESSORIES
- Polaris RZR 570 Parts and Accessories
- Polaris RZR 800 Parts and Accessories
- Polaris RZR 900 XP Parts and Accessories
- Polaris RZR 1000 XP Parts and Accessories
- Polaris RZR 1000 S Parts and Accessories
- Polaris RZR 900 Trail/XC/S Parts and Accessories
- RS1 Parts and Accessories
- RZR PRO XP
- Polaris RZR Turbo Parts and Accessories
- POLARIS RANGER PARTS AND ACCESSORIES
- POLARIS ATV PARTS AND ACCESSORIES
- Sportsman 400
- Polaris Sportsman 500 Parts and Accessories
- Polaris Sportsman 570 Parts and Accessories
- Polaris Sportsman 600 Parts and Accessories
- Polaris Sportsman 700 Parts and Accessories
- Polaris Sportsman 800 Parts and Accessories
- Polaris Sportsman 550/850/1000 XP Parts and Accessories
- Polaris Scrambler 500 Parts and Accessories
- Polaris Scrambler 850/1000 Parts and Accessories
- Polaris Trailblazer Parts and Accessories
- Polaris Magnum Parts and Accessories
- Polaris Ace Parts and Accessories
- CAN-AM PARTS AND ACCESSORIES
- POLARIS RZR PARTS AND ACCESSORIES
- ATV
- UTV
- SNOWMOBILE
- MOTORCYCLE
- LAWN & GARDEN
- Small Engine Parts
- 50% OFF PRODUCTS
- Checkout