• Trailblazer Clutch Cover Gasket and Screw Kit

    Replace your leaking clutch cover gasket with this quality replacement gasket from Quad Logic. To make your installation easy we took the time to group these gaskets with new screws into a complete kit! This kit includes 1 Clutch Cover Gasket, 7 Screws

    This kit replaces Polaris part numbers:

    Clutch Cover Gasket, 5521148, 5521160, 5521301, 5525160, 5521578, 5521738

    Screws, 7512094, 7512093, 7512095, 7512093

    This kit works with the following models;

     

    1999 Worker 335

    1999-01 Worker 500

    2000-02 Xplorer 250

    1996-99 Xplorer 300

    1996-02 Xplorer 400

    1997 Xplorer 500

    1996-99 Xpress 300

    1996-97 Xpress 400

    2003 Trail Blazer 400

    1996-02 Trail Boss 250

    2001-02 Trail Boss 325

    1997-02 Trail Blazer 250

    REPLACES POLARIS PART NUMBER(S): 5521148, 5521160, 5521301, 5525160, 5521578, 5521738, 7512094, 7512093, 7512095, 7512093

    $22.95 $20.66
  • Trailblazer Carburetor Needle and Seat

    New replacement needle and seat for your Polaris ATV carburetor.  Includes a new needle, seat, and rubber sealing o-ring.  Installs just like stock to get your fuel flowing properly again.  Replaces Polaris part number 3130495.  Fits the following Polaris two stroke ATV’s:

    1994-97 400L
    1995-01 Scrambler 400
    1994-99 Sport 400
    1996-97 Trailblazer 250
    1995-01 Xplorer 400
    1996-97 Xpress 300/400

    Replaces Polaris 3130495.

    $23.95 $21.56
  • Trailblazer Carburetor Needle & Seat

    New replacement 2.5 needle and seat for your Polaris ATV carburetor.  Includes a new viton tipped needle and brass seat.  Installs just like stock to get your fuel flowing properly again.  Replaces Polaris part number 3130360. Fits the following Polaris two stroke ATV’s and more:

    1990-01 Trailblazer
    1985-99 Trail Boss
    1993-95 250/300/350L models

    1996-97 Sport 400
    1996-01 Xplorer 250/300
    1996-99 Xpress 300/400
    1993-95 250/300/350L models

    Replaces Polaris part number 3130360

    $19.95 $17.96
  • Trailblazer 2 stroke Flywheel

    Complete new replacement flywheel for your Polaris 2 Stroke ATV. The stock flywheels are prone to failure, especially the magnets coming loose or breaking. Fix it for good with our aftermarket flywheel that is a big improvement over the stock unit. It starts with using a higher temp epoxy that eliminates magnet detachment. High strength steel capping prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator. Lastly, these stators are precision balanced to reduce vibration and add longevity to your engine. Installation is just like stock. Replaces Polaris part numbers: 3084760, and 3084784.

    Fits all the following Polaris models:

    2003 Trail Blazer 400

    1994-97 Big Boss 400

    1996-97 Xpress 300

    1996-97 Xpress 400

    1995-02 Xplorer 400

    1994-99 Sport 400

    1995-02 Scrambler 400

    1994-97 Sportsman 400

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $174.95 $157.46
  • Trail Blazer 250 (1990-2006) Carburetor Intake Adapter Boot

    Brand new intake manifold for the Polaris Trail Blazer 250 motors. A cracked or leaking intake manifold will cause a lean condition and engine damage if not corrected. Get it back running like new again with this new direct replacement intake boot by Quad Logic.


    FITS THE FOLLOWING MODEL(S):

    1990-’06 TRAIL BLAZER 250
    1993 250
    1994-’95 300
    1989-’92 BIG BOSS 250
    1985-’86 SCRAMBLER 250
    1996-’97 SPORT 400L
    1985-’99 TRAIL BOSS 250
    1996-’02 XPLORER 300
    1996-’99 XPRESS 300
    1996-’97 XPRESS 400

    USED ON CAN-AM PART NUMBER(S): 3085013 and 3083412

    $17.95 $16.16
  • Sportsman Ignition Keyswitch Repair Harness Pigtail

    The connectors to the Polaris ATV ignition switches are prone to corroding and preventing the switch from working. Even the tab is brittle so they can easily break off and need to be replaced. Don’t buy the whole wire harness from Polaris!! We have this easy pigtail kit to splice in the new connector. This direct replacement plug fits a huge number of 2002 and newer Polaris ATV models and will get your ignition switch working again. Simply cut off the old harness and use the included butt connectors or solder the connections to the new pigtail. Our pigtail fits perfectly to the ignition switch and has a nice wire sheathing protecting the wires going into the plug. The wires are 6″ long so it can be fixed inside the headlight pod. Sold Each. Includes butt connectors and zip ties. Fits all 6 pin ignition switches such as Polaris part number 4010390, 4011002, 4012165, 4012166. Fits the models listed below and more:

    2008-10 Sportsman 300
    2002-14 Sportsman 400
    2006-18 Sportsman 450
    2002-13 Sportsman 500
    2009-14 Sportsman 550
    2014-18 Sportsman 570
    2003-05 Sportsman 600
    2002-07 Sportsman 700
    2005-14 Sportsman 800
    2009-17 Sportsman 850

    2010-19 Sportsman 850 Touring
    2015-17 Sportsman 1000

    2015-18 Sportsman 1000 Touring
    2015 Sportsman ETX

    Works with Polaris Part Number: 4010390, 4011002, 4012165, 4012166

    $24.95 $22.46
  • Sportsman 500 Storage Box Latch Left

    Replacement quarter turn latch with detent for the Sportsman front storage rack. This perfect replacement includes the glass filled nylon thumb latch with LH steel hook. Also included a new steel mounting nut and rubber washer. This latch fits the LEFT side only (when sitting on the machine). Replaces Polaris part number 7081241, 7081421, and 7081145. Fits the following Polaris models:

    2008-11 Hawkeye
    2006 Magnum 330
    2008-10 Sportsman 300
    2005 and 2008-10 Sportsman 400
    2006-07 Sportsman 450
    2005-10 Sportsman 500 (All, including X2, Touring, 6×6)

    Replaces Polaris Part Numbers: 7081241, 7081421, and 7081145

    $11.95 $10.76
  • Sportsman 500 Recoil Spring

    If your recoil spring broke or exploded out of the housing, this is an excellent replacement. Simply drop into place then release the wire to install! Sold each. Replaces Polaris 3083185 and 3021648. Replacement for all following Polaris ATV’s:

    2008-10 Sportsman 300
    1999-00 Sportsman 335
    1994-97 Sportsman 400L
    2001-08 Sportsman 400
    2006-07 Sportsman 450
    1996-08 Sportsman 500

    $14.95 $13.46
  • Sportsman 500 REAR Brake Caliper Seal O-ring Kit

    This seal kit allows you to rebuild that sticking or worn out rear brake caliper.  Includes all the seals pictured. Sold per caliper. Replaces Polaris part numbers 5410766, 5410767, 5410542, and 5411432.  Fits the REAR transmission mounted caliper on the following Polaris Sportsman ATV’s and more:
    1996-97 Sportsman 500
    1994-95 Polaris 300 2×4 and 4×4
    1994-97 Polaris 400L 2×4, 4×4, and 6×6
    1998-99 Big Boss 500 6×6

    This kit will fit Polaris rear caliper part number 5410766, 5410767, 5410542, and 5411432.

    $19.95 $17.96
  • Sportsman 500 Handlebar Master Cylinder

    Excellent replacement master cylinder for your 2007-2017 Polaris ATV. Comes complete with aluminum brake lever and parking brake just like the original Hayes model. This completely assembled, ready to bolt on unit is a great alternative to the expensive OEM unit. Will work great on just about any 2007-17 Sportsman Scrambler, or Hawkeye model.

    2008-10 SPORTSMAN 300
    2008-14 SPORTSMAN 400
    2007 AND 2016 SPORTSMAN 450
    2010-13 SPORTSMAN 500

    Replaces Polaris part number 2010276, 2203051, and 2203060

    $119.95 $107.96
  • Sportsman 500 (1996-1998) Speedometer Backlight Bulb

    This bulb will replace that blown out bulb in your Speedometer on 1996-98 Sportsman 500 models. Replace it now so you can see your speedo at night!

    FITS THE FOLLOWING MODEL(S):

    1996-’98 SPORTSMAN 500

    ALSO FITS….

    1999 WORKER 335
    1996-’98 XPLORER 400L
    1996-’97 XPRESS 300
    1996-’97 XPRESS 400

    REPLACES POLARIS PART NUMBER(S): 4030015

    $6.95 $6.26
  • Sportsman 400L Water Pump Seal

    We developed these seals to be exact replacements to the original. This water pump seal is the INNER of the two water pump seals. Replaces Polaris part # 3084184.  Fits the following models and more:

    1995-02 Scrambler 400

    1994-98 Sport 400

    1995-02 Xplorer 400

    1996-97 Xpress 300/400

    1990-95 Trail Boss 350L

    1993-97 Sportsman 400L

    1995-97 Big Boss 400L

    Replaces Polaris part #3084184.

    $11.95 $10.76
  • Sportsman 400 Ignition Switch Keyswitch Key

    Stop Letting the dealer rip you off! This is the same exact key switch you would get at the dealer for a fraction of the price. Snaps right in. Two keys and mounting nut included. Replaces part numbers: 4110086 and 4110140

    1993-95 250 
    1989-92 Trail Boss 250 
    1994-95 300
    1993 350L 
    1990-92 Trail Boss 350L
    1994-95 400L
    1995 Scrambler 400 
    1994-95 Sport 400 
    1993-95 Sportsman 400 
    1995 Xplorer 400

    Replacement for the Polaris 4110086 and 4110140

    $19.95 $17.96
  • Sportsman 400 Front Diff Pinion Gear Bushing

    This small bushing that is installed in the pinion gear assembly and cannot be purchased separately from Polaris! Save yourself hundreds of dollars in extra parts you don’t need while saving your differential from a costly rebuild. Install just like stock.

    Fits the following Polaris models:

    2008-10 Sportsman 300

    2008-14 Sportsman 400

    $14.95 $13.46
  • Sportsman 400 (2008-2010) Seat Cover

    Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. Our new seat covers are made out of a very high quality advanced material. It has a 4 way stretch pattern unlike most cheaper 2 way stretch materials. The benefit to the 4 way stretch is that it will be easier to install and be much less prone to wrinkles! You can stretch it any direction to staple it in place. Secondly, this is a low temp material. It will not crack or tear down to -20 degrees! The cheap materials just do not stand up to the cold. To install, simply remove the old seat cover and staple this cover in its place, instructions are included. This cover is proudly MADE IN THE USA.

    THIS IS NOT A COMPLETE SEAT, IT IS THE SEAT COVERING ONLY!


    FITS THE FOLLOWING MODEL(S):

    2008-’10 SPORTSMAN 400

    ALSO FITS….

    2008-10 SPORTSMAN 300


    REPLACES POLARIS PART NUMBER(S): 2684012-070 and 2684061

     

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $44.95 $40.46
  • Sportsman 400 (1996-1997) Carburetor Intake Adapter Boot

    Brand new intake manifold for the Polaris Trail Blazer 250 motors. A cracked or leaking intake manifold will cause a lean condition and engine damage if not corrected. Get it back running like new again with this new direct replacement intake boot by Quad Logic.


    FITS THE FOLLOWING MODEL(S):

    1996 SPORTSMAN 400
    1997 SPORTSMAN 400L

    ALSO FITS…

    1997 BIG BOSS 400L
    1998-’02 SCRAMBLER 400
    1999 SPORT 400
    1996-’97 SPORT 400L
    1999-’02 XPLORER 400
    1996-’98 XPLORER 400L
    1996-’97 XPRESS 300
    1996-’97 XPRESS 400

    REPLACES POLARIS PART NUMBER(S): 3085277

    $15.95 $14.36

Main Menu