-
Roll Pin Punch Tool
Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:
Polaris ATV’s from 1993 to Current
Polaris RZR UTV’s from 2008 to Current
Polaris Ranger UTV’s from 2003 to Current
$24.95$22.46Roll Pin Punch Tool
$24.95$22.46 -
RZR Premium Billet Primary Clutch Cover with Bearing
Replace that heavy and weak cast aluminum primary clutch cover with this billet aluminum version. CNC cut from 6061 aluminum, this cover is a work of art and works great too. Lighter and stronger then stock and you will notice and better top end engagement. Also has a small fins to allow for slightly better cooling. Installs just like the stock unit, no modifications necessary. Replaces pretty much every Polaris ATV/ UTV clutch cover from 1996 and up. Does not fit 2016-19 RZR Turbos and RS1
$99.95$89.96RZR Premium Billet Primary Clutch Cover with Bearing
$99.95$89.96 -
Scrambler 400 Water Pump Impeller
NEW Scrambler 400 Water Pump Impeller! Replace that cheesy stock plastic impeller with our aluminum version. Installs just like the stock unit, no modifications necessary.
FITS THE FOLLOWING MODEL(S):
1995-’02 SCRAMBLER 400 REPLACES POLARIS PART NUMBER(S): 3084186
$34.95$31.46Scrambler 400 Water Pump Impeller
$34.95$31.46 -
Scrambler 500 (1998-2001) Fuel Petcock
Exact replacement fuel shut off valve for your 1998-2001 Polaris Scrambler 500. Three way valve for on, off and reserve. If you have a slow leak it is bound to get worse, replace it now at a fraction of the dealer cost.
FITS THE FOLLOWING MODEL(S):
1998-’01 SCRAMBLER 500 1998-’99 BIG BOSS 500 REPLACES POLARIS PART NUMBER(S): 7052190
$15.95$14.36Scrambler 500 (1998-2001) Fuel Petcock
$15.95$14.36 -
Scrambler 500 Choke Cable Fitting Removal Tool
If you have removed the carburetor on a Polaris ATV you will understand the importance of this NEW tool from Quad Logic! Mikuni 34mm Carburetors didn’t leave any room for a typical wrench to remove the choke cable fitting. This leaves very few options to successfully remove the choke cable with out damaging the brass fitting. We know the pain and fight these daily so we developed this very simple but very effective wrench to make your Polaris carburetor repair fast and simple! These custom made tools are precision cut for a perfect fit and zinc coated to prevent rust. This tool works to remove the choke cable fitting on most Polaris 34mm and 40mm carburetors from 1996 – 2013.
FITS THE FOLLOWING MODELS WITH 34mm – 40mm MIKUNI CARBURETORS:
1997-’12 Scrambler 500 We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.$22.95$20.66Scrambler 500 Choke Cable Fitting Removal Tool
$22.95$20.66 -
Scrambler 500 Engine Coolant Hose
We have developed our own line of replacement radiator hoses for Polaris ATV’s! These fabric reinforced hoses are custom formed and automotive quality. These are an exact replacement to the expensive OEM hoses. If you have any bulges or soft spots in your hoses, replace them now before they split. This short hose runs from the water pump to the cylinder on the engine. Fits the 1997-10 Scrambler 500’s.
Replaces Polaris part number 3084938 and 3085857.
$19.95$17.96Scrambler 500 Engine Coolant Hose
$19.95$17.96 -
Scrambler 500 Rear Hub with Studs
Brand new replacement rear hub for the Scrambler 500. Cast aluminum and finish machined to fit perfectly. Includes brand new installed wheel studs as well. Replaces Polaris part # 2200341 and 5131777. Fits either left or right side and sold Each.
Fits all 1997-12 Scrambler 500’s.
$49.95$44.96Scrambler 500 Rear Hub with Studs
$49.95$44.96 -
Scrambler 500 Spark Plug (BKR6E)
A misfiring engine or loss of spark could simply be a bad spark plug. Replace it quickly and easily with this spark plug you would find at the dealer but not paying the extra cost. Genuine NGK BKR6E spark plug. Sold Each
Fits all the 1997-2012 Scrambler 500’s.
Replaces Polaris Part Numbers: 3070172 and 3084997.
$7.99$7.19Scrambler 500 Spark Plug (BKR6E)
$7.99$7.19 -
Scrambler Billet Fuel Valve Extension and Knob
Replace your old broken plastic fuel shut off knob and extension with this bolt on direct replacement billet version that wont break. Replaces Polaris part number 5431021 and 5431391. Fits the following machines:
1995-09 Scrambler
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$24.95$22.46Scrambler Billet Fuel Valve Extension and Knob
$24.95$22.46 -
Scrambler Front Brake Rotor
Got bent or worn out front brake rotors? This heavy gauge steel rotor will last for years.
Includes a zinc coating to prevent rust. This rotor is the logical choice for your Polaris ATV!
Replaces Polaris part number 5211869.
This FRONT rotor fits the following machines:
1998-00 Scrambler 400
1998-00 Scrambler 500$29.95$26.96Scrambler Front Brake Rotor
$29.95$26.96 -
Scrambler Hi Beam, Low Oil Light Indicator Bulb
Indicator snaps right into your console and plugs in just like the original. It actually comes from the same factory as the OEM unit! Replace that burn out or broken light. Has the blue Hi Beam indicator and red Low Oil indicator. Three tabs on the back so all your original wires fit right on. Replaces Polaris part number 4040052. Fits the following Polaris ATV models:
1995-99 Scrambler 400
1995-99 Xplorer 300 and 400
1995-99 Xpress 300/400
Replaces Polaris part number 4040052.
$14.95$13.46Scrambler Hi Beam, Low Oil Light Indicator Bulb
$14.95$13.46 -
Sportsman 335 500 Rear STAINLESS Brake Line
Replace that swollen or blown OEM rubber brake line with this higher quality stainless steel brake line. Not only will it last much longer but you will get better brake feel and less fade. These brake lines are manufactured in the USA and are fully tested to 3000 psi! This 16″ overall length REAR brake line goes from the rear caliper to the foot brake master cylinder. Replaces Polaris part number 1910305. Fits the following models:1999-00 Sportsman 3351998-00 Sportsman 5001999 Worker 335/500
REPLACES POLARIS PART NUMBER(S): 1910305$49.95$44.96Sportsman 335 500 Rear STAINLESS Brake Line
$49.95$44.96 -
Sportsman 335 Stage 1 Engine Tune Up Kit
If your machine is not running up to its potential, this kit is for you. This Stage 1 kit includes a new air filter, pre-filter, oil filter, and spark plug. These simple to replace components can make a huge improvement in a machine that has been maintenance neglected. These filters are excellent quality replacements and Quad Logic approved. The spark plug is a genuine NGK plug matched for your Sportsman. Works on all 1999-2000 Sportsman 335 models.
This kit includes:
– Air Filter
– Water Resistant Pre-filter for the air filter.
– Oil Filter
– NGK Spark Plug (BKR7E)Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$44.95$40.46Sportsman 335 Stage 1 Engine Tune Up Kit
$44.95$40.46 -
Sportsman 34mm Carburetor Billet Side Cover with Gasket
Did you break the brittle plastic throttle cover on your Polaris carburetor? Quad Logic has the fix! Simply bolt this Billet side cover on in place of the broken factory throttle cover. This beautiful billet side cover is machined of 6061 billet aluminum, black anodized, then re-machined for a two tone effect. The center features our Quad Logic gear icon. This listing is for the cover and gasket only. Screws are NOT included. Fits all Polaris ATV and UTV that come factory with the Mikuni 34mm Carburetor. We tested this cover on both the OEM Mikuni carburetor as well as the aftermarket reproduction carburetors. Direct replacement for Polaris part number 3130511.
Fits the following Sportsman models:
2008-’10 SPORTSMAN 300 1999-’00 SPORTSMAN 335 2001-’14 SPORTSMAN 400 2006-’07 SPORTSMAN 450 1996-’01 SPORTSMAN 500 2000-’08 SPORTSMAN 500 6X6 2003-’05 SPORTSMAN 600 2002-’06 SPORTSMAN 700 (Does not fit the Sportsman 500 HO)Also fits the following models:
2000-’02 TRAIL BOSS 250 2001 TRAIL BOSS 325 2003-’13 TRAIL BOSS 330 1999 WORKER 335 1999 WORKER 500 2000-’02 XPEDITION 325 2000-’02 XPEDITION 425 1997 XPLORER 500 1998-’99 BIG BOSS 500 2008 HAWKEYE 2X4 2011 HAWKEYE 2X4 2006 HAWKEYE 2X4/4X4 2007 HAWKEYE 2X4/4X4 2009-’10 HAWKEYE 300 2011-’14 HAWKEYE 400 Replaces Polaris part number(s): 3130511
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$24.95$22.46Sportsman 34mm Carburetor Billet Side Cover with Gasket
$24.95$22.46 -
Sportsman 400 (1993-1997) Upper Engine Radiator Cooling Hose
We have developed our own line of replacement radiator hoses for Polaris ATV’s! These fabric reinforced hoses are custom formed and automotive quality. These are an exact replacement to the expensive OEM hoses. If you have any bulges or soft spots in your hoses, replace them now before they split. Replaces Polaris part number 5410570 for the 1993-1997 Sportsman 400’s,
FITS THE FOLLOWING MODEL(S):
1993-’96 SPORTSMAN 400 1997 SPORTSMAN 400L ALSO FITS…
1995-’00 SCRAMBLER 400 REPLACES POLARIS PART NUMBER(S): 5410570
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$24.95$22.46 -
Sportsman 400 (1994-96) Magneto Stator
Complete replacement stator for your Polaris ATV. This is an excellent quality RM stator brand replacement unit. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part #3084763. Fits all the following Polaris models:
1995-02 Xplorer 400
1994-96 Sportsman 400
1994-95 400L
1995 Sport 400
1996-97 Xpress 400L
1994-97 Big Boss 400L
Replaces Polaris part #3090155.
$199.95$179.96Sportsman 400 (1994-96) Magneto Stator
$199.95$179.96
- HOME
- Quad-Logic ATV Parts
- POLARIS RZR PARTS AND ACCESSORIES
- Polaris RZR 570 Parts and Accessories
- Polaris RZR 800 Parts and Accessories
- Polaris RZR 900 XP Parts and Accessories
- Polaris RZR 1000 XP Parts and Accessories
- Polaris RZR 1000 S Parts and Accessories
- Polaris RZR 900 Trail/XC/S Parts and Accessories
- RS1 Parts and Accessories
- RZR PRO XP
- Polaris RZR Turbo Parts and Accessories
- POLARIS RANGER PARTS AND ACCESSORIES
- POLARIS ATV PARTS AND ACCESSORIES
- Sportsman 400
- Polaris Sportsman 500 Parts and Accessories
- Polaris Sportsman 570 Parts and Accessories
- Polaris Sportsman 600 Parts and Accessories
- Polaris Sportsman 700 Parts and Accessories
- Polaris Sportsman 800 Parts and Accessories
- Polaris Sportsman 550/850/1000 XP Parts and Accessories
- Polaris Scrambler 500 Parts and Accessories
- Polaris Scrambler 850/1000 Parts and Accessories
- Polaris Trailblazer Parts and Accessories
- Polaris Magnum Parts and Accessories
- Polaris Ace Parts and Accessories
- CAN-AM PARTS AND ACCESSORIES
- POLARIS RZR PARTS AND ACCESSORIES
- ATV
- UTV
- SNOWMOBILE
- MOTORCYCLE
- LAWN & GARDEN
- Small Engine Parts
- 50% OFF PRODUCTS
- Checkout
