Accessories
-
-
Scrambler 850/1000 Quick Release Dzus Fastener Side Panel Hardware Kit
It’s very frustrating that Polaris has stooped to using those cheap plastic rivets to attach body panels on their ATV’s. Not only do they break or loosen up over time but you need a special pliers to remove them. The Scrambler 850/1000 side panels are held on with these plastic rivets, what are you to do if you have an engine issue out on the trail and you don’t have tools to remove them? Who wants to grab special pliers to remove the side panels every time you wash it?
We are problem solvers here at Quad Logic and like to make your life easier. We developed this super trick Dzus fastener kit to easily remove your side panels without tools! They are also much stronger and will not break like the plastic rivets. After some simple installation, all it takes is a quarter turn of the fasteners and the side panel can be removed or installed. Don’t worry about dropping or losing any hardware either, it all stays attached to the side panels!
This kit includes everything you need to install it on both side panels including instructions. Definitely recommended for all Scrambler 850/1000 owners!FITS THE FOLLOWING MODELS:
2013-’22 Scrambler 850
2014-’22 Scrambler 1000$39.95$35.96 -
Scrambler XP BILLET Front Storage Rack Latch
We designed our own 6061 billet aluminum latch assembly for the newer Sportsman and Scrambler front racks. This latch is virtually unbreakable and looks amazing on the machine. Get rid of those flimsy stock plastic latches that break! Both the latch and the shaft are billet aluminum in this assembly. A black anodized finish with an engraved Quad Logic logo looks awesome. We use a strong shoulder bolt to hold the two together and we also include a new spacer and bushing for a complete installation! Installs and works just like the original. Replaces Polaris part numbers 5438117, 5438118, 5413887, 5521796.
Sold each so order two if replacing both latches.
Fits the following models:
2013-21 Scrambler 850
2014-21 Scrambler 1000Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$29.95$26.96Scrambler XP BILLET Front Storage Rack Latch
$29.95$26.96 -
Scrambler XP Rear Storage Compartment Rubber Strap
Exact replacement rubber rear storage cover strap for the Scrambler 850/1000. Replaces Polaris part number 5438262. Sold Each. Fits the following models:
2014-21 Scrambler 850
2014-21 Scrambler 1000
Replaces Polaris part number 5438262
$7.95$7.16 -
Sportsman 400 (2001-2004) Gripper Seat Cover
Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather GRIPPER material. The gripper material gives you a better feel on the seat and eliminates that slippery feeling you get from the stock seat cover. Simply remove the old seat cover and staple this in its place. Custom fit for the following Polaris ATV models:
2001-04 Sportsman 400
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$34.95$31.46Sportsman 400 (2001-2004) Gripper Seat Cover
$34.95$31.46 -
Sportsman 400 (2001-2004) Seat Cover
Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. Our new seat covers are made out of a very high quality advanced material. It has a 4 way stretch pattern unlike most cheaper 2 way stretch materials. The benefit to the 4 way stretch is that it will be easier to install and be much less prone to wrinkles! You can stretch it any direction to staple it in place. Secondly, this is a low temp material. It will not crack or tear down to -20 degrees! The cheap materials just do not stand up to the cold. Simply remove the old seat cover and staple this in its place. Installation instructions included. NOTE: THIS IS THE COVER ONLY, NOT THE WHOLE SEAT. Custom fit for the following Sportsman ATV models:
2001-04 Sportsman 400
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$39.95$35.96Sportsman 400 (2001-2004) Seat Cover
$39.95$35.96 -
Sportsman 400 (2004) STEEL Front Rack
Calling all 2004 Sportsman 400 owners! Following our extremely popular steel floorboards are these brand new steel front racks! Forget about broken racks for good! These steel racks have a tubular substructure with a sheet metal top layer to mimic the look of the factory racks. These racks look so good most people wont notice they are aftermarket. We kept the look and integrity of the machine while giving it a huge upgrade in strength. Those of you who load up your racks or ride their machine off road a lot know, the plastic racks do not hold up!
These racks are finished in a beautiful black texture powdercoat for a long lasting finish. It is a very grippy finish that helps keep your gear from sliding around like on the factory racks. There are as many or more tie down points for straps as well. Installation in a snap, it uses the same four mounting bots as stock.
Plastic does not belong on an ATV! The fit and finish are excellent, these look like they are factory equipment, the way your Sportsman should have been. Fits just like stock, you can re-use all the original hardware. These racks will NOT accept rack extensions or other accessories without modification. This is for the FRONT only. Replaces Polaris part numbers 5434697-070
FITS THE FOLLOWING MODEL(S):
2004 Sportsman 400
REPLACES POLARIS PART NUMBER(S): 5434697-070
$179.95$161.96Sportsman 400 (2004) STEEL Front Rack
$179.95$161.96 -
Sportsman 400 (2008-2010) Seat Cover
Got a ripped or torn seat cover? Replace it with this custom fit cover made out of the highest quality all weather material. Our new seat covers are made out of a very high quality advanced material. It has a 4 way stretch pattern unlike most cheaper 2 way stretch materials. The benefit to the 4 way stretch is that it will be easier to install and be much less prone to wrinkles! You can stretch it any direction to staple it in place. Secondly, this is a low temp material. It will not crack or tear down to -20 degrees! The cheap materials just do not stand up to the cold. To install, simply remove the old seat cover and staple this cover in its place, instructions are included. This cover is proudly MADE IN THE USA.
THIS IS NOT A COMPLETE SEAT, IT IS THE SEAT COVERING ONLY!
FITS THE FOLLOWING MODEL(S):2008-’10 SPORTSMAN 400 ALSO FITS….
2008-10 SPORTSMAN 300
REPLACES POLARIS PART NUMBER(S): 2684012-070 and 2684061We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$44.95$40.46Sportsman 400 (2008-2010) Seat Cover
$44.95$40.46 -
Sportsman 400 Front Storage Rack Rubber Seal
Exact replacement foam/rubber seal for the Sportsman front storage rack. Keep your compartment water tight by replacing this seal when worn or torn. Replaces Polaris part number 5521693. Fits the following Sportsman models:
2005 Sportsman 400
2006-07 Sportsman 450
Replaces Polaris part Numbers: 5521693
$9.95$8.96Sportsman 400 Front Storage Rack Rubber Seal
$9.95$8.96 -
Sportsman 400 Winch Mount Kit (Warn, KFI Superwinch)
This heavy gauge steel winch mount kit allows you to mount just about any brand or size (up to 4000#) of winch to your 2005-10 Sportsman. The winch and roller fairlead must be the standard 4.875″ bolt pattern version. Generally this kit will fit most 1500 lb. and larger winches of any brand but you must check your bolt pattern spacing before ordering!! This kit tucks the winch up behind the plastic for a very nice, clean installation. All mounting hardware and instructions are included. Black powder coated finish. Roller fairlead and winch are NOT included, mount only.
Fits winches on the following models:
2005 Sportsman 400
$49.95$44.96Sportsman 400 Winch Mount Kit (Warn, KFI Superwinch)
$49.95$44.96 -
Sportsman 450 570 STEEL Footwell Floorboards LEFT SIDE
You’ve asked for them and now they are ready! Following our popular older Style sportsman steel footwells, these are the new Sportsman 450/570 footwells! The fit and finish is fantastic on these footwells, the lines match perfectly and they look like OEM equipment. These floorboards are manufactured from lasered sheet steel then formed to fit the contour of your fenders. We even put tabs on the backside to hold your plastic in place. We even kept the nice footpegs that run from side to side! Lastly they are finished in a beautiful black texture powdercoat for a long lasting finish. This special powdercoat is VERY grippy, it feels like grip tape so your boots will not slide around in the floorboards. Plastic does not belong on an ATV! Fix yours for good with these new steel footwells. Fits similar to stock, you can re-use most the original hardware and we add some hardware to finish it off. Includes Left floorboards. Replaces Polaris part number 5450523-070
Fits all 2014-19 standard chassis Sportsman 450 and 570 including EPS and SP models.
NOTE: Due to the excessive size/shape of these footwells it is possible they will get some small scratches or scuffs during shipping. We do package them very well but the shipping companies are rough with them. If you are looking for show quality, please do not order. They will arrive in good condition and hopefully perfect but we cannot guarantee there will not be some small scratches/scuffs. If so, they can easily be fixed up with some touch-up paint. Thank you.
Replaces Polaris Part Number: 5450523-070
$199.95$179.96Sportsman 450 570 STEEL Footwell Floorboards LEFT SIDE
$199.95$179.96 -
Sportsman 450 570 STEEL Footwell Floorboards RIGHT SIDE
You’ve asked for them and now they are ready! Following our popular older Style sportsman steel footwells, these are the new Sportsman 450/570 footwells! The fit and finish is fantastic on these footwells, the lines match perfectly and they look like OEM equipment. These floorboards are manufactured from lasered sheet steel then formed to fit the contour of your fenders. We even put tabs on the backside to hold your plastic in place. We even kept the nice footpegs that run from side to side! Lastly they are finished in a beautiful black texture powdercoat for a long lasting finish. This special powdercoat is VERY grippy, it feels like grip tape so your boots will not slide around in the floorboards. Plastic does not belong on an ATV! Fix yours for good with these new steel footwells. Fits similar to stock, you can re-use most the original hardware and we add some hardware to finish it off. Includes Right floorboards. Replaces Polaris part number 5450524-070
Fits all 2014-19 standard chassis Sportsman 450 and 570 including EPS and SP models.
NOTE: Due to the excessive size/shape of these footwells it is possible they will get some small scratches or scuffs during shipping. We do package them very well but the shipping companies are rough with them. If you are looking for show quality, please do not order. They will arrive in good condition and hopefully perfect but we cannot guarantee there will not be some small scratches/scuffs. If so, they can easily be fixed up with some touch-up paint. Thank you.
Replaces Polaris Part Number: 5450524-070
$199.95$179.96Sportsman 450 570 STEEL Footwell Floorboards RIGHT SIDE
$199.95$179.96 -
Sportsman 450/570 Footpad Set
Keep your feet dry and your Sportsman 450/570 fenders protected with our new waterproof EVA footpads! These footpads are made using EVA Foam with 3M adhesive, the same material used on boat decks and jet ski’s. Our footpads are easy to install. Simply clean off your fender surface, then peal and stick!
FITS THE FOLLOWING MODELS:
2014-’22 Sportsman 450
2014-’22 Sportsman 570We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$39.95$35.96Sportsman 450/570 Footpad Set
$39.95$35.96 -
Sportsman 500 2″ Receiver Tow Hitch
This is a very heavy duty 2″ receiver style tow hitch for the Sportsman 500. The backbone is made of formed heavy gauge steel which is mated to a thick one-piece receiver tube. We then integrate tow hooks for added strength and a place to put your tow hooks when moving a trailer. Any standard 2″ automotive tow bar will fit into the hitch using the normal 5/8″ pin.
Installation is simple and we include the mounting hardware and instructions. Black powder coated finish will look great for years. These hitches are made here in the USA!! Please support local manufacturing. This hitch will fit all standard chassis Sportsman 500’s from 2005-10. It does NOT fit the X2 models. Its possible it will fit the Touring but we nave not tried it yet so we cannot confirm. Also may fit the 700 and 800 but not sure yet.$69.95$62.96Sportsman 500 2″ Receiver Tow Hitch
$69.95$62.96 -
Sportsman 500 600 700 800 (2005-10) Body Stickers Decals Graphics Kit
Give your 2005-10 Polaris Sportsman a makeover with this affordable graphics kit. Too often your machine with get ripped, torn, or faded graphics over the years that can reduce its appearance and value. We designed this kit to be an OEM look unlike the other crazy flames, skulls, etc wraps that are out there. This kit both updates the style and appearance of your machine at a fraction of the cost of OEM graphics. Includes graphics for both the left and right sides of the machine as well as the handlebar pod. Heavy gauge 10 mil vinyl is extremely durable for outdoor use and UV resistant as well. Color neutral black, white, and grey (with a touch of red) will look amazing on any color of machine. We included all the applicable engine size decals as well so you can pick the correct one for your machine. Includes all the decals shown in the picture. Does NOT include any warning decals.
Will fit all 2005-10 Sportsman 400 (2005 model only), 450, 500, 600, 700 and 800 models.
$69.95$62.96 -
Sportsman 500 Floorboard Screw and Nut Kit
Brand new phillips head screws and nylock nuts used on most 1997-04 Polaris ATV’s to mount the floorboards to the frame. Includes two longer screws that go through the plastic spacer and two shorter screws where the spacer is not used. This kit is enough to mount ONE footwell. Exact replacement for Polaris 7517377, 7517376, 7542122 and 7512239. This auction is for a set of 4 screws and 4 nylock nuts. On twin cylinder machines (600/700) be sure to order two kits since they use 4 long bolts on one side and 4 short bolts on the other side. For use on the following machines and more:
1997-04 Sportsman 500
Replaces Polaris part numbers 7517377, 7517376, 7542122 and 7512239.
$8.95$8.06Sportsman 500 Floorboard Screw and Nut Kit
$8.95$8.06