2016
-
Ranger 900 Accessory Frame Tube End Cap Plug Kit
This neat plug kit finished off the unsightly open frame tubes in your Ranger. The frame tubes fill up with water and mud then start rusting out right away. These plugs simply pound into place with your hand or a rubber mallet and give that professional fit and finish look. Keep your frame tubes clean and rust free with this simple kit! Fits all Ranger 900 XP models from 2013 to current. Not sure if it also fits the Crew model as we are still looking into it. Includes FOUR frame plugs.
$19.95$17.96Ranger 900 Accessory Frame Tube End Cap Plug Kit
$19.95$17.96 -
Ranger 900 Coated Tailgate Cable
Exact replacement stainless steel tailgate cable for many Polaris Ranger models. This cable is a direct fit, it will install just like the original and is the same 10-3/8″ overall length. Has one looped cable end and one steel end with a hole. One key feature over the stock cable is there there is a heavy duty PVC coating over this cable. This extends the cable life, looks better for a much longer period, and will not allow the cable to fray like the stock uncoated cables! It is even MADE in the USA! Fits either left or right side. Sold EACH. Replaces Polaris part number 7081925. Fits the following Polaris Ranger Models:
2014-18 Ranger 900 (XP and Crew Models)
Replacement for the Polaris 7081925
$19.95$17.96Ranger 900 Coated Tailgate Cable
$19.95$17.96 -
Ranger Body Panel Torx Screw and Flat Nut (Set of 6)
Brand new flat nut used on many 2014 and newer Polaris Ranger, RZR and ACE models to mount different body panels, fender flares, plastic, etc. Exact replacement for Polaris 7547674. Black zinc plating. This is for a set of 6 flat nuts.
Exact replacement for Polaris # 7547674
$10.95$9.86Ranger Body Panel Torx Screw and Flat Nut (Set of 6)
$10.95$9.86 -
Ranger Side Safety Window Net Buckle Clips 2″
Exact replacement 2″ net buckle for many 2015 and newer Rangers. This is a direct replacement from the original manufacturer. This is used on the front of the nets where it clips into the bracket on the roll cage. Just the male buckle shown is included. Many fit other years and models as well, just compare your old buckle to the photo.
$8.95$8.06Ranger Side Safety Window Net Buckle Clips 2″
$8.95$8.06 -
RZR 1000 XP 2″ Receiver Tow Hitch
This is a very heavy duty 2″ receiver style tow hitch for the RZR 1000. The backbone is made of formed heavy gauge steel which is mated to a thick one-piece receiver tube. We then integrate tow hooks for added strength and a place to put your tow hooks when moving a trailer. Any standard 2″ automotive tow bar will fit into the hitch using the normal 5/8″ pin. It will even work with the Polaris accessory rear bumper!
Installation is simple and we include the mounting hardware and instructions. Black powder coated finish will look great for years. These hitches are made here in the USA!! Please support local manufacturing. This hitch will fit all RZR 1000 and Turbo models from 2014-17.
Note: If you have a 2017 model, be sure to measure your suspension bolt holes before ordering. The 2017’s can have either a 10m or 12m hole.
$79.95$71.96RZR 1000 XP 2″ Receiver Tow Hitch
$79.95$71.96 -
RZR 1000 XP Front Tow Hook
This is a very heavy duty front tow hook for most Polaris RZR models. Thick plate steel construction with dual reinforcements make this a very over-built tow hook! Aggressive design and beefy five point mounting make this a must have accessory. We designed it not to stick out too far from the machine but still have the capability of using either a tow strap or winch hook for towing. Mounts below the winch area so it normally will not interfere if you have a winch mounted. Will NOT fit with most front bumpers.
Installation is simple and we include the mounting hardware and instructions. Black powder coated finish will look great for years. These tow hooks are made here in the USA!! Please support local manufacturing. This hitch will fit the following models:2014-18 RZR 1000 (All Models)
2016-18 RZR Turbo$39.95$35.96RZR 1000 XP Front Tow Hook
$39.95$35.96 -
RZR 800 Adjustable Roll Bar Rollbar Clamp for Accessories
This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. Even the tension is adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of two ways. There is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
Fits most 2008 and newer RZR 800, 900, 1000 roll bars.
$22.95$20.66 -
RZR Roll Bar Clamp w/Bracket for LED Lights, Windshields, Roofs…
This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. This clamp is differentiated from our other clamps by the bracket installed to give you extra mounting options. It has a larger 7/16″ hole to handle heavier accessories. The tension is also adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of a couple ways. The easiest is bolting through the 7/16″ hole on the bracket. If this does not work for your application you can actually remove the bracket and there is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
These are the strongest, best looking, most versatile quick release roll bar clamps on the market!!! Fits most 2008-16 RZR 570, 800, 900, and 1000 models.$24.95$22.46 -
RZR Seat Belt Harness Pass Through Bezel (INDIVIDUAL)
These plastic seat bezel allow for the installation of 4 or 5 point harnesses in your factory seat by allowing the top straps to go through the back of the seat ensuring a safe proper fitment of the harness.
Fits most Polaris RZR and General models.
This plastic bezel will offer a smooth clean look to your seat after they are installed.
Installation will require some work and cutting the factory seats. We include detailed installation instructions.
Sold as Each.
Fits the following Polaris models:
2015-21 RZR 900 (All)
2014-21 RZR 1000 (All)
2016-21 RZR Turbo (All, Except Pro-XP)
2018-21 RZR RS1Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$24.95$22.46RZR Seat Belt Harness Pass Through Bezel (INDIVIDUAL)
$24.95$22.46 -
RZR Turbo 1/4 Turn Hood Latch and Rubber Gromment Kit
Replacement quarter turn latch and rubber grommet kit for RZR Turbo hoods. Replaces Polaris part number 5439798, 5413428. Fits the following Polaris models:
2016-18 RZR XP Turbo (Including 4 Seater)
Replaces Polaris Part Number: 5439798, 5413428
$14.95$13.46RZR Turbo 1/4 Turn Hood Latch and Rubber Gromment Kit
$14.95$13.46 -
RZR Turbo Exhaust Aluminum Heat Shield
Add some style to your RZR turbo while keeping heat under control. This aluminum heat shield has a very military inspired fluted barrel design! Full three sided protection around the main headpipe (behind the rear tire). Not only does it protect your shock and plastic from heat, it also protects the exhaust from flying rocks and debris. The gun barrel look sets your machine apart from the rest! Black powdercoated finish. Simple installation. Fits all 2016-18 RZR Turbo models.
2016-22 RZR Turbo
$114.95$103.46RZR Turbo Exhaust Aluminum Heat Shield
$114.95$103.46 -
RZR Turbo Winch Mount Kit
Heavy gauge steel Winch Mount Kit specific for your Polaris RZR 900/1000 models. Kit provides the hardware necessary to mount a winch to your Polaris and are designed to fit Cycle Country, Kolpin & other branded aftermarket winches.Fits the following models;2016-21 RZR Turbo (All Models except Turbo S)
Sturdy line of winch mount kit provides the hardware necessary to mount a winch to your vehicle
Designed to fit Kolpin and other branded aftermarket winches with common bolt patterns
Made with heavy gauge steel
Powder coat paint protectionWe make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.Returns are subject to 15% restocking fee.$69.99$62.99RZR Turbo Winch Mount Kit
$69.99$62.99 -
RZR XP Turbo 1/4 Turn Hood Latch
Replacement quarter turn latch for RZR Turbo hoods. Replaces Polaris part number 5439798. Fits the following Polaris models:
2016-18 RZR XP Turbo (Including 4 Seater)
Replaces Polaris Part Number: 5439798
$8.95$8.06RZR XP Turbo 1/4 Turn Hood Latch
$8.95$8.06 -
Scrambler 850/1000 Quick Release Dzus Fastener Side Panel Hardware Kit
It’s very frustrating that Polaris has stooped to using those cheap plastic rivets to attach body panels on their ATV’s. Not only do they break or loosen up over time but you need a special pliers to remove them. The Scrambler 850/1000 side panels are held on with these plastic rivets, what are you to do if you have an engine issue out on the trail and you don’t have tools to remove them? Who wants to grab special pliers to remove the side panels every time you wash it?
We are problem solvers here at Quad Logic and like to make your life easier. We developed this super trick Dzus fastener kit to easily remove your side panels without tools! They are also much stronger and will not break like the plastic rivets. After some simple installation, all it takes is a quarter turn of the fasteners and the side panel can be removed or installed. Don’t worry about dropping or losing any hardware either, it all stays attached to the side panels!
This kit includes everything you need to install it on both side panels including instructions. Definitely recommended for all Scrambler 850/1000 owners!FITS THE FOLLOWING MODELS:
2013-’22 Scrambler 850
2014-’22 Scrambler 1000$39.95$35.96 -
Scrambler XP BILLET Front Storage Rack Latch
We designed our own 6061 billet aluminum latch assembly for the newer Sportsman and Scrambler front racks. This latch is virtually unbreakable and looks amazing on the machine. Get rid of those flimsy stock plastic latches that break! Both the latch and the shaft are billet aluminum in this assembly. A black anodized finish with an engraved Quad Logic logo looks awesome. We use a strong shoulder bolt to hold the two together and we also include a new spacer and bushing for a complete installation! Installs and works just like the original. Replaces Polaris part numbers 5438117, 5438118, 5413887, 5521796.
Sold each so order two if replacing both latches.
Fits the following models:
2013-21 Scrambler 850
2014-21 Scrambler 1000Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$29.95$26.96Scrambler XP BILLET Front Storage Rack Latch
$29.95$26.96 -
Scrambler XP Rear Storage Compartment Rubber Strap
Exact replacement rubber rear storage cover strap for the Scrambler 850/1000. Replaces Polaris part number 5438262. Sold Each. Fits the following models:
2014-21 Scrambler 850
2014-21 Scrambler 1000
Replaces Polaris part number 5438262
$7.95$7.16