2012
-
Roll Pin Punch Tool
Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:
Polaris ATV’s from 1993 to Current
Polaris RZR UTV’s from 2008 to Current
Polaris Ranger UTV’s from 2003 to Current
$24.95$22.46Roll Pin Punch Tool
$24.95$22.46 -
RZR 570 Flywheel Puller
This heavy duty steel puller will remove even the most stubborn flywheels! Zinc plating for corrosion resistance.
Simply thread onto the flywheel then tighten the center bolt to pop the flywheel off the shaft. This puller uses the M50 x 1.5 Left Hand threads. This is equivalent to the Polaris PA-49316 puller!
Easy to use and works on the following models:
2012-20 RZR 570Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$54.95$49.46RZR 570 Flywheel Puller
$54.95$49.46 -
RZR 570 Front A-Arm Bushing Rebuild Kit
Repair your lower LH/RH A-Arms with a New A-Arm Bushing Rebuild Kit from Quad Logic! This kit works for both left hand and right hand lower front A-Arms. Kit Includes: Front A-Arm Bushing (2), Pivot Tube (1), A-Arm Bolt (1), Washer (1), Nut (1) and Ball Joint (1) SOLD EACH
FITS THE FOLLOWING MODEL(S):
2012-’20 RZR 570 2021-’22 RZR 570 TRAIL REPLACES POLARIS PART NUMBER(S): 5436973, 5138791, 7519087, 7556153, 754333 and 7061187
$49.95$44.96RZR 570 Front A-Arm Bushing Rebuild Kit
$49.95$44.96 -
RZR 570 Fuel Injector 2012-2022
Quad Logic now stocks these new quality replacement fuel injectors for your 2012-22 RZR 900 These injectors have been tested and proven on our own equipment so you can buy with confidence. Keep your machine running like new by replacing your old and failing injectors with our quality products. These are direct replacements of Polaris part # 2521068
Please check the Polaris parts diagrams to ensure proper fitment.(This listing is for 1 single injector)
Fits the following models:
2012-22 RZR 570
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$34.95$31.46RZR 570 Fuel Injector 2012-2022
$34.95$31.46 -
RZR 570 New Ignition Coil
Does your Polaris not have any spark? The ignition coil is a great place to start! Save tons of money over the expensive dealerships and try the quality electrical components from Quad Logic. These direct replacement ignition coils will get your Polaris running running like new. This ignition coil is a direct replacement for Polaris part numbers 4011482, 4011834, 4015072.
Fits the following models:
2012-22 RZR 570
REPLACES POLARIS PART NUMBER(S): 4011482, 4011834, 40150727$49.95$44.96RZR 570 New Ignition Coil
$49.95$44.96 -
RZR 570 Steering Rack
Is your steering getting sloppy? Is your rack and pinion worn out? Replace it with this heavy-duty rack and pinion and get back out riding today. This rack and pinion comes with all new hardware and upgraded heavy-duty tie rods. Just screw your old tie rod ends on and go. DOES NOT COME WITH TIE ROD END’S.FITS THE FOLLOWING MODEL(S):
2012-’22 RZR 570
REPLACES POLARIS PART NUMBER(S): 1823632$99.95$89.96RZR 570 Steering Rack
$99.95$89.96 -
RZR 800 Adjustable Roll Bar Rollbar Clamp for Accessories
This high impact plastic clamp is the ticket for installing any accessory to your RZR roll bar. Adjustable size fits 1.5″ to 1.75″ roll bars. Even the tension is adjustable with the twist handle! The handle then cams over to lock in place. The great part is this is quick release without tools! Just pull the handle and pop the clamp off the rollbar. Install your accessory to the clamp one of two ways. There is an M6 threaded insert that can be bolted to or there is pocket on the inside to mount an M6 (or 1/4″) bolt facing outward. Sold EACH.
Fits most 2008 and newer RZR 800, 900, 1000 roll bars.
$22.95$20.66 -
RZR 900 Brake Master Cylinder
Excellent OEM quality replacement foot pedal master cylinder for your RZR. Comes fully assembled and ready to bolt in. Includes the reservoir and cap. Fits all 2011-22 RZR 900’s.
Replaces Polaris part numbers 1911515, 1911234, 1911168, 2203454, 2204117, and 1912463.
$99.95$89.96RZR 900 Brake Master Cylinder
$99.95$89.96 -
RZR Premium Billet Primary Clutch Cover with Bearing
Replace that heavy and weak cast aluminum primary clutch cover with this billet aluminum version. CNC cut from 6061 aluminum, this cover is a work of art and works great too. Lighter and stronger then stock and you will notice and better top end engagement. Also has a small fins to allow for slightly better cooling. Installs just like the stock unit, no modifications necessary. Replaces pretty much every Polaris ATV/ UTV clutch cover from 1996 and up. Does not fit 2016-19 RZR Turbos and RS1
$99.95$89.96RZR Premium Billet Primary Clutch Cover with Bearing
$99.95$89.96 -
RZR XP 1000 Right Rear Brake Line
Fix your Polaris brake line with this quality replacement from Quad Logic. This is a Direct replacement for Polaris part number 1912061. It replaces the RIGHT REAR brake line. Please check Polaris parts diagrams to ensure proper fitment.
FITS THE FOLLOWING MODEL(S):
2014-22 RZR XP 1000
2014-22 RZR XP4 1000
2016-21 RZR XP Turbo
2016-21 RZR XP4 Turbo
REPLACE POLARIS PART NUMBER(S): 1912061
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$89.95$80.96RZR XP 1000 Right Rear Brake Line
$89.95$80.96 -
Sportsman 500 Front Ball Joint Puller Removal Tool
Pulling the ball joints from the aluminum strut housing on most Polaris ATV’s can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel puller simply goes over the balljoint, install the nut, and turn out the inner puller to remove the ball joint. A 6 point 1″ socket is required. Zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
Unlike other tools on the market that use all of the old ball joints threads, this tool only uses the top few threads of the ball joint. If your threads are damaged, those other pullers will not work! Even in your threads are damaged you can normally still make our puller work due to the dual puller design. Does the balljoint spin freely or slop up and down in its housing? No problem, this puller will easily remove it! Complete instructions are included.
This puller can be used on almost any Polaris ATV or UTV with the strut style front suspension from about 1985 to current.
You can view a video of the puller in action on Youtube here, just copy and past the URL into your browser:
https://youtu.be/NgGPTWaG5Q0
$39.95$35.96Sportsman 500 Front Ball Joint Puller Removal Tool
$39.95$35.96 -
Sportsman 550 850 XP 1000 Front Ball Joint
New replacement front ball joints for your Polaris Sportsman XP chassis. Get rid of that slop in your front end by replacing your worn out ball joints with these OEM quality replacements. Sold Each. Fits either left or right side on the upper or lower a-arms. Includes the dust cap and a new circlip. Replaces the Polaris # 7061220, 7061187, 7081505, 7081580, and 7081666. Fits the following models:
2009-14 Sportsman 5502009-22 Sportsman 850 XP (All Models)2015-19 Sportsman 1000 XP$19.95$17.96Sportsman 550 850 XP 1000 Front Ball Joint
$19.95$17.96 -
Sportsman 550/850/1000 Clutch Bolt Spacer Bushing
New clutch bolt spacer bushing for your Sportsman 550/850/1000. Replaces Polaris part number 5437682
FITS THE FOLLOWING POLARIS MODELS:
2015-’16 SPORTSMAN 1000 2016-’18 SPORTSMAN 1000 HIGH LIFTER 2015-’18 SPORTSMAN TOURING 1000 2019-’22 SPORTSMAN TOURING XP 1000 2015-’22 SPORTSMAN XP 1000 2010-’14 SPORTSMAN 550 2013-’14 SPORTSMAN TOURING 550 2010-’14 SPORTSMAN X2 550 2009-’10, -’13 SPORTSMAN XP 550 2014-’22 SPORTSMAN 850 2010-’22 SPORTSMAN TOURING 850 2020 SPORTSMAN TOURING XP 850 2011 SPORTSMAN X2 850 2009-’15 SPORTSMAN XP 850 REPLACES POLARIS PART NUMBER(S): 5437682.
$6.95$6.26 -
Sportsman 850/1000 Main Bearing and Seal Kit
Smoking a crank bearing is a pretty common problem but does not have to be the end of your motor. Fix it yourself and save a ton of money. This kit includes the main crank bearings and seals.
FITS THE FOLLOWING MODEL(S):2014-’22 SPORTSMAN 850 2010-’22 SPORTSMAN 850 TOURING 2011 SPORTSMAN X2 850 2009-’14 SPORTSMAN XP 850 2015-’22 SPORTSMAN XP 1000 2015-’22 SPORTSMAN XP 1000 TOURING REPLACES POLARIS PART NUMBER(S): 3514534
$114.95$103.46Sportsman 850/1000 Main Bearing and Seal Kit
$114.95$103.46 -
Sportsman Tie Rod End To Spindle Washers (4 PACK)
Brand new washers for your Polaris Sportsman. These washers are specifically used on the outer tie rod ends of models Polaris Sportsman models. These yellow zinc washers are an exact replacement for Polaris Part number 7556099. 2 washers are used each side of machine, 1 on top of spindle and 1 on the bottom as shown in pictures above. these are sold as a 4 pack so you can replace both sides of the machine.
This listing is for 4 washers only. No other hardware is included in the listing. Please check out Quad Logic for all your Polaris hardware needs.
Fits the following models and many more
2000 Sportsman 335
2000-19 Sportsman 500
2001-14 Sportsman 400
2002-07 Sportsman 700
2006-14 Sportsman 800
2014-22 Sportsman 570
2016-22 Sportsman 450
2020-22 Sportsman 850
2020-22 Sportsman 1000
REPLACES POLARIS PART NUMBER(S): 7556099
$6.95$6.26 -
Sportsman XP Brake Light Switch
No brake lights? Fix your broken or corroded brake light switch with this direct replacement. Simply bolt in place and you are back in business. Get you brake lights working properly again with this new switch. Easy installation on the handlebar master cylinder. Same as Polaris 2202794. Fits the following Polaris models:
2009-14 Sportsman 550 (All models)
2009-22 Sportsman 850 (All models)
2015-22 Sportsman 1000 (All models)Replaces Polaris Part Number: 2202794
$39.95$35.96Sportsman XP Brake Light Switch
$39.95$35.96