2007
-
Ranger 700 Keihin Throttle Position Sensor (TPS)
New replacement Keihin TPS (Throttle Position Sensor) for your Polaris Ranger 700. Replaces Polaris part numbers 2410342 and 1204715.
FITS THE FOLLOWING MODELS:
2005-’09 RANGER 700REPLACES POLARIS PART NUMBER(S): 2410342 and 1204715
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$24.95$22.46Ranger 700 Keihin Throttle Position Sensor (TPS)
$24.95$22.46 -
Ranger 800 UTV Mechanical Water Pump Seal and Seal Driver
We’ve tooled up to offer you a great cost effective replacement to the OEM water pump seal. This seal is made to the exact same specifications as stock so you can be sure it will perform the same and save you money at the same time! Kit also includes our custom seal driver. This particular seal is hard to install because you cannot use a socket. It sits in a pocket that a socket of this size will not fit into. A standard piece of pipe will also not work as there is nothing the correct size. The answer? We took some heavy gauge PVC tubing and machined the ID to fit perfectly over the lip of the seal. Use a big rubber mallet to pound it in perfectly.
This kit includes both the water pump seal and the matching seal driver.
Fits the following:
2006-14 Polaris Ranger 700 and 800’s (Including XP, Crew, and 6×6 models).
Replaces Polaris part number 3610075.
$49.95$44.96 -
Ranger 800 Water Pump Rebuild Kit
We put together a complete water pump rebuild kit for all Polaris 600/700/800 motors. The heart of this kit is our mechanical water pump seal. You can trust our seals to last! Changing the oil seal behind the mechanical seal is a must so we included our viton replacement unit. Installing the mechanical seal can be very tricky so we machined a perfectly sized seal driver to make installation a breeze. Also, our billet water pump impeller will last much longer than the cheap plastic stock impeller. Lastly a new cover o-ring will prevent any leaks. This kit will get you back up and running in no time at a fraction of the cost of dealer parts. Fits the following Polaris models:
2005-15 Ranger 700 and 800 models (Including XP, 6×6, Crew, and Midsize)
$99.95$89.96Ranger 800 Water Pump Rebuild Kit
$99.95$89.96 -
Ranger Air Filter
Don’t ignore that dirty air filter. This can rob a ton of power from your Ranger and allow dirt and impurities into the engine. Drop in this new exact replacement filter and your Ranger will thank you. Replaces Polaris part number 7081308. Fits the following models:
2010-14 Ranger 400 (All)
2006-13 Ranger 500 (All)
2006-09 Ranger 700 (All)
2010 Ranger 800 (All)
Replaces Polaris Part # 7081308
$24.95$22.46Ranger Air Filter
$24.95$22.46 -
Ranger Secondary Clutch Bolt and Washers
Brand new secondary clutch bolt, lock washer and domed washer for the Ranger. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5220646, 7515382, and 7552901. Includes one clutch bolt, one domed washer, and one lock washer. Fits the following Ranger’s:
2011-14 Ranger 400
2006-12 Ranger 500
2006-09 Ranger 700
2012-14 Ranger 800
Ranger Series 10 and 11
Replaces Polaris Part Numbers: 5250562, 7515327, and 7552901
$8.95$8.06Ranger Secondary Clutch Bolt and Washers
$8.95$8.06 -
Renegade 500 800 Heavy Duty Headlight Support Mount
Did you break the plastic headlight support on your Can-Am Renegade? Quad Logic has your fix! After having this problem on our machines we developed this heavy duty steel replacement. These brackets are laser cut from heavy gauge steel, welded and then powder coated for a life long durable finish. Simply bolt these brackets in place of the factory plastic mounts. To make installation even easier Quad Logic even includes all the necessary hardware! We specifically designed these brackets to fit Gen 1 Renegade 500 and 800 models. (2007-2012) Be sure to check out Quad Logics full line up of Can-am parts and accessories.
Directly replaces Can-am part numbers 705002424 and 705002425
This kit includes Left and Right side headlight support brackets and all mounting hardware.
Fits the following models:
2007-11 Renegade 800
2008-12 Renegade 500
Direct replacement of Can-Am Part Numbers 705002424 and 705002425 $49.95$44.96Renegade 500 800 Heavy Duty Headlight Support Mount
$49.95$44.96 -
Renegade Front Differential Bearing and Seal Kit
If your rear diff is making some noise or completely blown, this bearing and seal kit will smooth it out again. These brand new bearings and seals are direct replacements. Includes all the bearings and seals shown to complete the rebuild. Fits the following Can-Am models:
2008-2015 Renegade 500
2012 Renegade 500 XT
2016 Renegade 570 EFI
2007-2015 Renegade 800
2016 Renegade 850
2012-2015 Renegade 1000
2016 Renegade 1000 XMR
$79.95$71.96Renegade Front Differential Bearing and Seal Kit
$79.95$71.96 -
Roll Pin Punch Tool
Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:
Polaris ATV’s from 1993 to Current
Polaris RZR UTV’s from 2008 to Current
Polaris Ranger UTV’s from 2003 to Current
$24.95$22.46Roll Pin Punch Tool
$24.95$22.46 -
RZR 800 Driveshaft Spring Pin (Roll Pin)
This spring pin is used in almost all Polaris Ranger and RZR UTV’s from 2003 to 2016 for attaching the driveshafts and prop shafts to the differentials. These can be very difficult to remove and normally get damaged when you pound them out. Be sure to use a new one each time you remove one. Exactly the same as Polaris 7661913. Sold Each.
$7.95$7.16RZR 800 Driveshaft Spring Pin (Roll Pin)
$7.95$7.16 -
RZR Premium Billet Primary Clutch Cover with Bearing
Replace that heavy and weak cast aluminum primary clutch cover with this billet aluminum version. CNC cut from 6061 aluminum, this cover is a work of art and works great too. Lighter and stronger then stock and you will notice and better top end engagement. Also has a small fins to allow for slightly better cooling. Installs just like the stock unit, no modifications necessary. Replaces pretty much every Polaris ATV/ UTV clutch cover from 1996 and up. Does not fit 2016-19 RZR Turbos and RS1
$99.95$89.96RZR Premium Billet Primary Clutch Cover with Bearing
$99.95$89.96 -
Scrambler 500 Choke Cable Fitting Removal Tool
If you have removed the carburetor on a Polaris ATV you will understand the importance of this NEW tool from Quad Logic! Mikuni 34mm Carburetors didn’t leave any room for a typical wrench to remove the choke cable fitting. This leaves very few options to successfully remove the choke cable with out damaging the brass fitting. We know the pain and fight these daily so we developed this very simple but very effective wrench to make your Polaris carburetor repair fast and simple! These custom made tools are precision cut for a perfect fit and zinc coated to prevent rust. This tool works to remove the choke cable fitting on most Polaris 34mm and 40mm carburetors from 1996 – 2013.
FITS THE FOLLOWING MODELS WITH 34mm – 40mm MIKUNI CARBURETORS:
1997-’12 Scrambler 500 We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.$22.95$20.66Scrambler 500 Choke Cable Fitting Removal Tool
$22.95$20.66 -
Scrambler 500 Rear Hub with Studs
Brand new replacement rear hub for the Scrambler 500. Cast aluminum and finish machined to fit perfectly. Includes brand new installed wheel studs as well. Replaces Polaris part # 2200341 and 5131777. Fits either left or right side and sold Each.
Fits all 1997-12 Scrambler 500’s.
$49.95$44.96Scrambler 500 Rear Hub with Studs
$49.95$44.96 -
Scrambler 500 Spark Plug (BKR6E)
A misfiring engine or loss of spark could simply be a bad spark plug. Replace it quickly and easily with this spark plug you would find at the dealer but not paying the extra cost. Genuine NGK BKR6E spark plug. Sold Each
Fits all the 1997-2012 Scrambler 500’s.
Replaces Polaris Part Numbers: 3070172 and 3084997.
$7.99$7.19Scrambler 500 Spark Plug (BKR6E)
$7.99$7.19 -
Sportsman 34mm Carburetor Billet Side Cover with Gasket
Did you break the brittle plastic throttle cover on your Polaris carburetor? Quad Logic has the fix! Simply bolt this Billet side cover on in place of the broken factory throttle cover. This beautiful billet side cover is machined of 6061 billet aluminum, black anodized, then re-machined for a two tone effect. The center features our Quad Logic gear icon. This listing is for the cover and gasket only. Screws are NOT included. Fits all Polaris ATV and UTV that come factory with the Mikuni 34mm Carburetor. We tested this cover on both the OEM Mikuni carburetor as well as the aftermarket reproduction carburetors. Direct replacement for Polaris part number 3130511.
Fits the following Sportsman models:
2008-’10 SPORTSMAN 300 1999-’00 SPORTSMAN 335 2001-’14 SPORTSMAN 400 2006-’07 SPORTSMAN 450 1996-’01 SPORTSMAN 500 2000-’08 SPORTSMAN 500 6X6 2003-’05 SPORTSMAN 600 2002-’06 SPORTSMAN 700 (Does not fit the Sportsman 500 HO)Also fits the following models:
2000-’02 TRAIL BOSS 250 2001 TRAIL BOSS 325 2003-’13 TRAIL BOSS 330 1999 WORKER 335 1999 WORKER 500 2000-’02 XPEDITION 325 2000-’02 XPEDITION 425 1997 XPLORER 500 1998-’99 BIG BOSS 500 2008 HAWKEYE 2X4 2011 HAWKEYE 2X4 2006 HAWKEYE 2X4/4X4 2007 HAWKEYE 2X4/4X4 2009-’10 HAWKEYE 300 2011-’14 HAWKEYE 400 Replaces Polaris part number(s): 3130511
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$24.95$22.46Sportsman 34mm Carburetor Billet Side Cover with Gasket
$24.95$22.46 -
Sportsman 400 450 Top End Rebuild: Piston, Rings, Top End Gaskets
Rebuild your top end with this complete kit. The kit is centered around a new Namura piston kit. These pistons are top quality and include all the features of the more expensive pistons like teflon coated skirts, anodized domes, and machine finished heads. This kit includes a STANDARD 87.89 MM piston kit with rings, pin and circlip. The top end gasket kit includes head, base, side cover and exhaust gasket to rebuild the top end of your Polaris 400. Even includes the valve seals! Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following parts shown in the photo including:
- Std. Piston Kit
- Head Gasket
- Base Gasket
- Valve Cover Gasket
- Exhaust Gasket
- Cam Cover Gasket
- Water Outlet Gasket
- Valve Seals (4)
- Camshaft Adapter O-ring
This top end repair kit fits the following models:
2001-05 Sportsman 400
2008-14 Sportsman 400
2004-05 Ranger 400
2010-14 Ranger 400
2011-14 Hawkeye 400
2006-07 Sportsman 450
$129.95$116.96 -
Sportsman 400 Clutch Cover Gasket and Screw Kit
Brand new clutch cover gasket and screw kit.
Fits the following and much more:
1999-00 SPORTSMAN 335
2001-05 SPORTSMAN 400
1997 SPORTSMAN 400L
2011-14 SPORTSMAN 400 HO 4X4
You will receive ONE clutch cover foam gasket and SIX clutch cover screws.
The gasket replaces Polaris part numbers 5521148, 5521160, 5521301, 5525160, 5521578, and 5521738. The screws replace Polaris part numbers 7512093, 7512094 and 7512095.
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
$18.95$17.06Sportsman 400 Clutch Cover Gasket and Screw Kit
$18.95$17.06
