2001
-
Roll Pin Punch Tool
Working on your front differential can be a real pain without the correct tools. Get the job done fast and correctly using this roll pin punch tool by Quad Logic. We developed this tool to remove the Pin Spring (Roll Pin) that you see on most of Polaris’s drive train. You can use an air hammer if you have one or just use a normal hammer. Be sure to use a new one each time you remove the old one. Works with the following models and more:
Polaris ATV’s from 1993 to Current
Polaris RZR UTV’s from 2008 to Current
Polaris Ranger UTV’s from 2003 to Current
$24.95$22.46Roll Pin Punch Tool
$24.95$22.46 -
Scrambler 400 Water Pump Impeller
NEW Scrambler 400 Water Pump Impeller! Replace that cheesy stock plastic impeller with our aluminum version. Installs just like the stock unit, no modifications necessary.
FITS THE FOLLOWING MODEL(S):
1995-’02 SCRAMBLER 400 REPLACES POLARIS PART NUMBER(S): 3084186
$34.95$31.46Scrambler 400 Water Pump Impeller
$34.95$31.46 -
Scrambler Billet Fuel Valve Extension and Knob
Replace your old broken plastic fuel shut off knob and extension with this bolt on direct replacement billet version that wont break. Replaces Polaris part number 5431021 and 5431391. Fits the following machines:
1995-09 Scrambler
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$24.95$22.46Scrambler Billet Fuel Valve Extension and Knob
$24.95$22.46 -
Sportsman 400 10″ Battery Strap
Replace your snapped or worn out battery strap with our 10″ battery strap with hooks.
FITS THE FOLLOWING MODELS:
2001-’05 SPORTSMAN 400 2011-’14 SPORTSMAN 400 1993-’96 SPORTSMAN 400L ALSO FITS POLARIS MODELS:
2015 SPORTSMAN ETX 1999-’00 SPORTSMAN 335 REPLACES POLARIS PART NUMBER(S): 5410424 and 5412499
$10.95$9.86Sportsman 400 10″ Battery Strap
$10.95$9.86 -
Sportsman 400L (1994-97) Exhaust Manifold Gasket
This exhaust manifold gasket from Quad Logic is designed to perform even better than the stock Polaris gasket. Installs between the cylinder and exhaust manifold. Sold each. Replaces Polaris part numbers 3084017, 3084439, and 3086757 for all Polaris 2-Stroke 300/400 cc motors. MADE IN THE USA! Exact replacement for the following models:
1995-02 Scrambler 400
1994-97 Sport 400
1994-97 Sportsman 400L (Including 6×6)
1995-06 Trail Blazer 250/400
1995-99 Trail Boss 250
Replaces Polaris 3084017, 3084439, and 3086757.
$9.95$8.96Sportsman 400L (1994-97) Exhaust Manifold Gasket
$9.95$8.96 -
Sportsman 400L 500 1/2″ Rear Wheel Stud (SET OF 4)
Brand new 1/2″ REAR wheel stud for many 1990-2013 Polaris ATV’s and UTV’s with steel wheels. Fits the rear hubs only. Exact replacement for Polaris 7512673. This auction is for a set of FOUR studs. Some applications include:
1993-99 Sportsman 400L
2000-08 Sportsman 500 6×6
Replaces Polaris Part Number 7512673
$11.95$10.76Sportsman 400L 500 1/2″ Rear Wheel Stud (SET OF 4)
$11.95$10.76 -
Sportsman 400L Water Pump Seal
We developed these seals to be exact replacements to the original. This water pump seal is the INNER of the two water pump seals. Replaces Polaris part # 3084184. Fits the following models and more:
1995-02 Scrambler 400
1994-98 Sport 400
1995-02 Xplorer 400
1996-97 Xpress 300/400
1990-95 Trail Boss 350L
1993-97 Sportsman 400L
1995-97 Big Boss 400L
Replaces Polaris part #3084184.
$11.95$10.76Sportsman 400L Water Pump Seal
$11.95$10.76 -
Sportsman 500 Front Ball Joint Puller Removal Tool
Pulling the ball joints from the aluminum strut housing on most Polaris ATV’s can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel puller simply goes over the balljoint, install the nut, and turn out the inner puller to remove the ball joint. A 6 point 1″ socket is required. Zinc plated for corrosion resistance. The heavy duty design is suited for either home or professional shop use.
Unlike other tools on the market that use all of the old ball joints threads, this tool only uses the top few threads of the ball joint. If your threads are damaged, those other pullers will not work! Even in your threads are damaged you can normally still make our puller work due to the dual puller design. Does the balljoint spin freely or slop up and down in its housing? No problem, this puller will easily remove it! Complete instructions are included.
This puller can be used on almost any Polaris ATV or UTV with the strut style front suspension from about 1985 to current.
You can view a video of the puller in action on Youtube here, just copy and past the URL into your browser:
https://youtu.be/NgGPTWaG5Q0
$39.95$35.96Sportsman 500 Front Ball Joint Puller Removal Tool
$39.95$35.96 -
Sportsman 500 Primary Clutch Weight Bolt and Nut Kit
Brand new primary clutch weight shoulder bolt and nut kit for many older Polaris ATV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 7512266 and 7541906. Includes three bolt’s and three nut’s. Fits the following models and more:
1994-98 Sport 400L
1993-96 Sportsman
1999-00 Sportsman 335
1997 Sportsman 400L
2001-05 Sportsman 400
2006 Sportsman 450
1996-07 Sportsman 500
Replaces Polaris Part Number: 7512266 and 7541906
$19.95$17.96Sportsman 500 Primary Clutch Weight Bolt and Nut Kit
$19.95$17.96 -
Sportsman 500 Recoil Spring
If your recoil spring broke or exploded out of the housing, this is an excellent replacement. Simply drop into place then release the wire to install! Sold each. Replaces Polaris 3083185 and 3021648. Replacement for all following Polaris ATV’s:
2008-10 Sportsman 300
1999-00 Sportsman 335
1994-97 Sportsman 400L
2001-08 Sportsman 400
2006-07 Sportsman 450
1996-08 Sportsman 500$14.95$13.46Sportsman 500 Recoil Spring
$14.95$13.46 -
Trail Blazer 250 (1990-2006) Carburetor Intake Adapter Boot
Brand new intake manifold for the Polaris Trail Blazer 250 motors. A cracked or leaking intake manifold will cause a lean condition and engine damage if not corrected. Get it back running like new again with this new direct replacement intake boot by Quad Logic.
FITS THE FOLLOWING MODEL(S):1990-’06 TRAIL BLAZER 250 1993 250 1994-’95 300 1989-’92 BIG BOSS 250 1985-’86 SCRAMBLER 250 1996-’97 SPORT 400L 1985-’99 TRAIL BOSS 250 1996-’02 XPLORER 300 1996-’99 XPRESS 300 1996-’97 XPRESS 400 USED ON CAN-AM PART NUMBER(S): 3085013 and 3083412
$17.95$16.16 -
Trail Blazer 250 Complete Engine Gasket Set with Seals
Trail Blazer 250 Complete Engine Gasket Set with Seals includes all the gaskets and seals to completely rebuild the engine of your Polaris 250 two stroke. Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit. Includes all of the following gaskets and seals shown in the photo including:
- Head Gasket
- Base Gasket
- Intake Boot O-ring
- Exhaust Gasket
- Starter Gasket
- PTO Oil Seal
- Mag Oil Seal
This gasket kit fits the following models:
1990-2006 Trailblazer 250
1989-92 Trailboss 250
1989-92 Big Boss 250
2000-02 Xplorer 250
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.$24.95$22.46Trail Blazer 250 Complete Engine Gasket Set with Seals
$24.95$22.46 -
Trail Blazer 250 Magneto Stator
Complete replacement stator for your Polaris ATV. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part # 3083979. Fits following models listed below.
1990-2006 Trail Blazer 250
Replaces Polaris Part Number: 3083979
$199.95$179.96Trail Blazer 250 Magneto Stator
$199.95$179.96 -
Trail Blazer Air Box Foam Collar
Quad Logic offers these quality foam replacement air box collars. The old foam parts are known to deteriorate over the years of use and we are here to help with our full line of replacement Polaris parts. These foam parts are a direct replacement for Polaris part number 5811102 and fit most Polaris Scrambler, Sport, and Trailblazers from 1995-02. Save over the high priced dealership prices with replacements from Quad Logic. Check out our full line up of products on our eBay store.
Fits the following models;
1995-02 Scrambler 400
1996-99 Sport 400
1996-99 Trailblazer
2000 Xplorer
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$14.95$13.46Trail Blazer Air Box Foam Collar
$14.95$13.46 -
Trailblazer 2 stroke Flywheel
Complete new replacement flywheel for your Polaris 2 Stroke ATV. The stock flywheels are prone to failure, especially the magnets coming loose or breaking. Fix it for good with our aftermarket flywheel that is a big improvement over the stock unit. It starts with using a higher temp epoxy that eliminates magnet detachment. High strength steel capping prevents harsh additives in motor oil from degrading the epoxy attaching the magnets. Though extremely unlikely, if a magnet did ever come loose, it would remain in the sleeve preventing contact with the stator. Lastly, these stators are precision balanced to reduce vibration and add longevity to your engine. Installation is just like stock. Replaces Polaris part numbers: 3084760, and 3084784.
Fits all the following Polaris models:
2003 Trail Blazer 400
1994-97 Big Boss 400
1996-97 Xpress 300
1996-97 Xpress 400
1995-02 Xplorer 400
1994-99 Sport 400
1995-02 Scrambler 400
1994-97 Sportsman 400
Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!
We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
Returns are subject to 15% restocking fee.
$174.95$157.46Trailblazer 2 stroke Flywheel
$174.95$157.46 -
Trailblazer 400 (1994-03) Magneto Stator
Complete replacement stator for your Polaris Trail Blazer, Scrambler, and Sport. This is an excellent quality RM stator brand replacement unit. All stators are brand new and are ready to plug right in. These are tested before they are shipped so you know you will not get a defective unit right out of the box. They use the highest quality windings and lamination material. Replaces Polaris part #3084785 and 3084788. Fits all the following Polaris models:
1996-97 and 03 Trail Blazer 400
1995-02 Scrambler 400
1996-99 and 94 Sport 400
Replaces Polaris part #3084785 and 3084788.
$199.95$179.96Trailblazer 400 (1994-03) Magneto Stator
$199.95$179.96