Search Results

Search Results for ""

  • Universal Premium ATV Heated Hand Grips

    Quad Logic’s Universal Premium ATV Heated Hand Grips are the ideal accessory for your machine when riding or plowing in cold weather conditions. Our heated hand grips will fit on standard 7/8″ handlebar. Install is easy as these grips are a simple two wire hook up. The adjustable 5 level temperature setting will allow you to keep your hands warm and comfortable, without being too hot or too cold. The left handle grip is equipped with an LED light and a push button temperature adjustment.  These hand grips go great with our Universal ATV Heated Seat Pads. (Part # 100-5156) Comes with installation instructions.

     

    Shipping from Ramsey, Minnesota (USA) within 24 hours allows you to BUY WITH CONFIDENCE!

    $99.95 $89.96
  • Universal Polaris EFI Fuel Sending Unit Float

    Fuel gauge quit working? Save the costly repair bill and try this replacement float from Quad Logic! Many times a faulty fuel gauge is caused by a leaky float and we’re here to help. Polaris and Can-Am do not sell these individually. We do not have a way to get and exact list of what these fit so please look closely and the pictures and compare the size to what is currently used on your machine. This quality float is approximately 1 1/2″ Tall and 1 1/4″ Diameter with an 1/8″ Hole in the middle. This float also includes the retainer clip to keep float securely mounted on the sending unit rod. Be sure to check out all of Quad Logic’s other options for complete sending units and other fuel system parts! This Universal fuel system float fits many powersport applications including the models listed below and many more!

    Ranger, RZR, Sportsman, Scrambler, Outlander Renegade, Maverick, Commander, Defender

    Exact Dimensions (1.45″ Tall 1.26″ DIA .100″ Center Hole)

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.

    Returns are subject to 15% restocking fee.

    $12.95 $11.66
  • Universal UTV Cigarette Lighter Kit

    No longer is wind an issue with this blast from the past universal UTV cigarette lighter kit!! Our lighter kit can be installed into an existing 1.10″ (28mm) or .875″ (22.25mm) hole in your dash or you can drill out a hole in a new location.  Once installed, just push, pop and enjoy!

    KIT INCLUDES:

    (1) Lighter Plug w/ Handle
    (1) Lighter socket
    (1) Trim Ring
    (1) Wire Harness
    (1) Install Instructions

     

    $19.95 $17.96
  • Universal ATV UTV Billet Aluminum Hawse

    Quad Logic now offers a new universal billet aluminum hawse.  Our heavy duty hawse is used for winches using nylon rope.  Mounting holes are 4 7/8″ apart and comes with mounting hardware. This universal hawse can be used on most model ATV and UTV makes and models. With a black powder coat finish and machined edges, not only is our hawse built strong, but looks just as tough.

    $49.95 $44.96
  • Trailblazer 400 Top End Gasket Set

    Kit includes head gasket, base gasket, reed valve gasket and exhaust gasket to rebuild the top end of your Polaris ATV 400 two stroke.  Don’t ever re-use old gaskets when rebuilding your engine! High quality non-asbestos materials are used in kit.  Includes all of the following top end gaskets shown in the photo including:

     

    • Head Gasket  (Replaces Polaris # 3084731)
    • Base Gasket (Replaces Polaris # 3084729)
    • Reed Valve Gasket (Replaces Polaris # 3084148)
    • Exhaust Gasket (Replaces Polaris #3084439, 3086757)

     

    This gasket kit fits the following models:

    1994-95 400L

    1994-97 400L Big Boss

    1995-02 Scrambler 400

    1994-99 Sport 400

    1994-97 Sportsman 400L

    1996-97 Xpress 400

    1995-02 Xplorer 400

    2003 Trail Blazer 400

    $24.95 $22.46
  • Trailblazer Engine Mounting Nuts (6 PACK)

    Brand new replacement engine mounting nuts for Polaris ATV models. These brand new flange hex flange nuts are brand new replacements for Polaris part number 7547108. These identical replacements are zinc coated for a durable finish and even include the factory applied thread locker on inside of the threads. We sell these nuts in a 6 pack. With many applications and other uses across all the Polaris machines be sure to check with the Polaris parts diagrams. The applications listed below show what machines use these nuts for engine mounting. 

    (Sold as a 6 PACK)

    Check out Quad Logic for all your replacement Polaris hardware needs.

    Fits the following models:

    2001 Worker 500

    1999-01 Xplorer 400

    2000-02 Xpedition 325

    2000-02 Xpedition 425

    2003-13 Trail Boss 330

    2008-13 Trail Blazer 330

    Replaces Polaris Part Number: 7547108

     

    We make every attempt to ensure every items fitment is accurate. We do the testing on each item before its listed for sale to ensure fitment and quality. Items may fit multiple years and models listed.
    Returns are subject to 15% restocking fee.
    $7.95 $7.16
  • Trailblazer Primary Clutch Bolt and Washers

    Brand new primary clutch bolt and washers for many single cylinder Polaris ATV and UTV’s. Brand new high quality parts are exactly the same as the originals! These replace Polaris part numbers 5210748, 7512566, and 7575202. Includes one clutch bolt, one thick flat washer, and one star type washer. Fits the following models and more:

    1990-2006 Trailblazer 250

    2008-13 Trailblazer 330

    Replaces Polaris Part Number: 5210748, 7512566, and 7575202

    $8.95 $8.06
  • Trailblazer Secondary Clutch Puller

    The secondary clutch is supposed to slide right off the shaft. However, if neglected, the clutch will be rusted onto the shaft and you simply cannot get it off without this puller. Hardened steel puller is plated for corrosion resistance. 5.5″ overall length. Same as Polaris part number 2870913.


    Fits all 1990-2013 Trailblazer 250/330/400 models

    Same as Polaris part number 2870913.

    $24.95 $22.46
  • Universal 4Pod RGB Rock Light Accessory Kit

    Add some glow to your ATV or UTV with this 4 Pod Rock Light Kit! The universal installation makes it easy to install on any machine with a 12 volt battery.  Use them for accent light in the wheel wells, under the dash, as a dome light, reverse lights, etc. You can literally put these lights wherever you want.  Everything is included so the installation is easy to do and the lights are Bluetooth controlled by a simple phone app. You can do virtually any color along with flashing or even set to the beat of your music!

    Highlighted features of these lights:
    – 6 high powered LED chips per light for the brightest display!
    – Cast aluminum housing. Forget about those cheap plastic ones that crack.
    – IP68 waterproof rating. Go deep or go home.
    – Stainless mounting hardware. It’s the details that count.
    – IOS and android compatible app.
    – Detailed instructions in proper english, not the poor quality instructions from the other sellers.
    – Millions of RGB light combinations.
    – Low power draw. We know you probably have other powered accessories as well.

    These are the strongest, best looking, most versatile rock lights on the market! This kit includes the controller box, 4 pod lights with 10′ wires, mounting hardware, and instructions.

    NOTE:  The phone shown in the picture is NOT included. You must use your own phone to operate the app.

    $99.95 $89.96
  • Trailblazer Primary Clutch Puller

    Brand new primary clutch puller for almost all 1985 and newer Polaris ATV’s and UTV’s using the P85 primary clutch. Hardened steel puller is plated for corrosion resistance. 10.25″ overall length and 3/4″-16 threads. Be sure to use a dab of grease on the end of the puller and threads to properly pull the clutch. Same as Polaris part number 2870506.

    Fits all 1990-2013 Trailblazer 250/330/400 models

    Same as Polaris part number 2870506.

    $24.95 $22.46
  • Trailblazer Low Oil Light Indicator

    This is the exact same low oil indicator lamp you can get at the dealer but for much less.  We cut out the middleman to save you money.  Indicator snaps right into your handlebar pod and plugs in just like the original.  Replace that burn out or broken light before you have heating issues and dont know it!  Fits the 1999-02 Xplorer 400, 1999-01 Scrambler 400, 1999 Sport 400, and 2000-01 Trailblazer 250 models.  Replaces Polaris part number 4010140.

    Replaces Polaris part number 4010140.

    $12.95 $11.66
  • Trailblazer Exhaust Gasket Donut Seal

    This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite.  It is designed to perform even better than the stock Polaris gasket.  Exact replacement for your Polaris.  Most Trailboss and Trailblazers use TWO gaskets total: one between the short head pipe and main pipe and another between the main pipe and the muffler.  Be sure to order 2 if replacing both.  Sold each. Replaces Polaris 5243517.  Fits the following Polaris ATV models:

    2008-13 Trail Blazer 330

    2000-02 Trail Boss

    2003-13 Trail Boss 330

    2000-02 Xpedition 325/425  

    Replaces Polaris 5243517.

    $9.99 $8.99
  • Trailblazer Clutch Cover Gasket and Screw Kit

    Replace your leaking clutch cover gasket with this quality replacement gasket from Quad Logic. To make your installation easy we took the time to group these gaskets with new screws into a complete kit! This kit includes 1 Clutch Cover Gasket, 7 Screws

    This kit replaces Polaris part numbers:

    Clutch Cover Gasket, 5521148, 5521160, 5521301, 5525160, 5521578, 5521738

    Screws, 7512094, 7512093, 7512095, 7512093

    This kit works with the following models;

     

    1999 Worker 335

    1999-01 Worker 500

    2000-02 Xplorer 250

    1996-99 Xplorer 300

    1996-02 Xplorer 400

    1997 Xplorer 500

    1996-99 Xpress 300

    1996-97 Xpress 400

    2003 Trail Blazer 400

    1996-02 Trail Boss 250

    2001-02 Trail Boss 325

    1997-02 Trail Blazer 250

    REPLACES POLARIS PART NUMBER(S): 5521148, 5521160, 5521301, 5525160, 5521578, 5521738, 7512094, 7512093, 7512095, 7512093

    $22.95 $20.66
  • Trailblazer Exhaust Gasket Donut Seal

    This exhaust gasket from Quad Logic is manufactured from a thick stainless steel mesh wrapped in an outer layer of graphite.  It is designed to perform even better than the stock Polaris gasket.  Exact replacement for the 1995-02 Scrambler 400, 1996-99 Sport 400, and the 2003 Trail Blazer 400.  The Scrambler/Sport 400 uses TWO of these gaskets total: one one each side of the short headpipe.  Be sure to order 2 if replacing both.  Sold each.  Replaces Polaris 5211592.

    Replaces Polaris Part # 5211592.

    $9.99 $8.99

Main Menu