1. Home
  2. Login
  3. View Cart
  4. Checkout
  5. Checkout

Rox Pivot Risers

Rox Pivot Risers

IMPORTANT INSTALLATION NOTES

  • Caution: First determine if you have adequate cable length before installing handlebar risers.
  • Important: After installation, check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IN BINDING. Check throttle routing and length. You may have to adjust position of controls or purchase extended cables.
  • Caution: Rox Speed FX is not responsible for injury or death resulting from improper installation! Thoroughly read and follow instructions.




  • Based on the Rox Speed FX patented pivoting riser, these risers work on any snowmobile, ATV, motorcycles, etc.
  • Dual rotation points allow rider to select optimum riding position
  • Check your cables first to see how high you can raise your bars
  • Three heights are available 2", 3.5" and 5"