| | |
 | 80 Degree Carbide Gold Digger®(Reference #GDC7MM)
This 80 degree carbide stud delivers solid longevity and good trail traction at a popular price. LIMITED TO CURRENT STOCK.
|
| |
.875" - 7mm
(Reference #GDC-8750B)
$49.95 | Package of 96 studs only
17 In Stock | |
|
60 Degree Gold Digger® Carbide Snap-Off Stud(Reference #GDCX7MM)
This carbide Snap-Off stud provides excellent traction on hard pack snow and ice. The 60 degree stud has a larger diameter carbide pin which will last longer. Four lengths allow use on regular and deep lub tracks. This stud features a 7mm thread body. LIMITED TO CURRENT STOCK
|  |
| |
.875" - 7mm
(Reference #GDCX-8750)
$44.95 | Package of 48 studs only
10 In Stock | |
|
Grass Plus Stud(Reference #DPS-8500)
"Grass Plus" is a scooper plate that works on grass, ice, or snow. It has a 45 degree angle that lays flat against the rubber lug and the track. Two arrow-head scoopers extend above the surface of the track. Package of 12 .850" studs.
1 In Stock
$6.95
|
|
|
 | 3-Point Grass Plus Stud(Reference #DSP-8750)
Highly aggressive triple points and terrain holding blade are designed for maximum traction on grass and snow. Package includes 24 - .875" steel scooper studs. The hole pattern is interchangeable with Bender Stud Made plates.
1 In Stock
$14.95
|
| |
|
 | 7mm Carbide Arrow Wedge Stud(Reference #ARROW-WEDGE)
A very large carbide wedge is brazed into a steel body for deep penetration. Position the wedge in line with sled travel and the stud will aid in cornering control. Rotate the wedge 90 degrees and the stud hooks up for stopping and starting traction. Or use a combination of positions on your track.
|
| |
Carbide Wedge
(Reference #GDW-7500B)
$99.95 | .750" T-Nut Style
Package of 96
3 In Stock | |
Arrow Wedge Carbide Stud
(Reference #GDWX-8750)
$79.95 | .875" Snap-Off Style
Package of 48
4 In Stock | |
|
 | Colored Square Support Plates(Reference #PLATES-COLOR)
Woody's had added exciting colors to the aluminum support plates. Closeout only on PURPLE.
|
|
Square Support Plate - PURPLE
(Reference #ASW-3735B)
$29.95 | 7mm HolePackage of 96
1 In Stock | |
Square Support Plate - PURPLE
(Reference #ASW2-3785)
$9.95 | 5/16" HolePackage of 24
1 In Stock | |
|
 | Bender Stud Mate Plates(Reference #BENDERPLATE)
Stud Mate plates hold stud rigid for maximum traction . The 45 degree angle lies flush against the track and the track lug. 1/4" / 7mm hole. Available in one hole or two hole.
|
|
One Hole Bender Stud Mate Plate
(Reference #AWL-3850)
$4.95 | STEELPackage of 12
27 In Stock | |
|
RBX Washer(Reference #RBX)
1 1/8" diameterFlat with reinforcing ribFor 7mm studsPackage of 96 pieces
4 In Stock
$12.95
|  |
| |
|
3-Point Starter Stud(Reference #SS-30X)
Wider base for stability
11/16" height
Package of 12 (HDB nuts and bolts are included)
2 In Stock
$12.95
|
|
|
Roetin Aluminum Drivers(Reference #PD-2)
7/8" HIGH DOUBLE HOLE PADDLE - 12 PER PACKAGE. They provide the same sort of push that the plasic paddles do, but in addition, they are much tougher and can stand running on hard pack and bare ground.
4 In Stock
$12.95
|
|
|
Roetin Black Header Stud(Reference #HDCM-875B)
7/8" SHARPENED CARBIDE 50 DEGREE POINT - 96 PACK. The large diameter obround stud head has a hex in the back to hold it while installing or removing. Made of the same high strength materials as the conventional Black Daggers. 1/4-20 thread. Originally $193.95.
1 In Stock
$49.95
|
|
|
Roetin X-Celerator Stud(Reference #900-013)
11/16" HIGH - 2 POINT. The carbide is brazed in at a very aggressive 10 degree angle. Each package contains six for both the left and right side. HDB bolt and nut included. Originally $68.95.
1 In Stock
$19.95
|
|
|
Simmons Paddle Picks(Reference #PDS-6500)
FOR PLASTIC CLEATS - 7MM DIAMETER. Designed to add carbide studs In place of mounting bolts for traction on ice and hard packed trails. Paddle pick is made to work with all current plastic cleat designs. Two flat support washers are used for supporting the stud and to shim the stud to the desired height. It is important to shim the stud slightly below the top of the plastic cleat. On hard surface and under torque the plastic cleat flexes to allow the stud to extend above the cleat for additionaly traction. Package of 18 picks, small washers, large washers and 1 tube of loctite. Originally $32.00.
1 In Stock
$9.95
|
|
|
Simmons Paddle Picks(Reference #PDS-6500X)
Same as above except 1/4"-20 thread.
1 In Stock
$9.95
|
|
|
| TCDTM Traction Control Device Exclusive "pyramid design" makes the TCD super strong
Exclusive 2 piece design makes installation easier and faster
Blades provide a paddle effect for the best traction in all snow conditions
Anti-rotation ribs in the base help hold the TCD during installation
Weighs the same or less than conventional push through stud designs
Gain 30% more traction than standard style studs.
All components included, nothing else to buy.
Package of 48 studs and 1/16" height spacers
Originally $131.95 per package.
|
Traction Control Device (TCD)
(Reference #TPS1-48)
$39.95 | .875"
10 In Stock | |
Traction Control Device (TCD)
(Reference #TPS-48)
$39.95 | 1.000"
17 In Stock | |
|
| TCDTM Height Spacers To change heights of TCDs for different height track lugs. 3/8" of TCD over the track lug is recommended. Package of 48 spacers per package.Originally $21.95 per pack |
TCD Height Spacer - 1/8"
(Reference #422-18)
$6.95 | 1/8" Height Spacer
9 In Stock | |
TCD Height Spacer - 3/8"
(Reference #422-38)
$6.95 | 3/8" Height Spacer
4 In Stock | |
|
| 1 5/16" X-Calibar Stud - 7mm Body |
X-Calibar Stud
(Reference #651-100B)
$136.20 | 96 Pack
1 In Stock | |
|
X-Calibar Modfied Studs(Reference #XCALMOD)
45 degree machine ground point. 48 pieces per package - stud only - order your choice of backers and nut separately.
|  |
| |
X-Calibar Stud
(Reference #648-1005)
$79.95 | 1 5/16" - 7mm Body
2 In Stock | |
|
Ultra Lite Nut & Backer(Reference #670-100)
1/6th the weight of steel
Self-tapping & lockiing
1/4" - Natural Color
Package of 24
2 In Stock
$12.50
|
|
|
 | Ultra Lites(Reference #ULTRALITES)
Patented Ultra-Lites replace the backing plate and the nut on push-through studs. They are made of a self taping, space-age plastic which is very hard and very light. The weight savings can be as much as 4 to 6 pounds in the cases where 144 to 240 studs are installed. They weigh about 1/6 that of steel plates and nuts. Two sizes for 7mm and 5/16" studs.
|
| |
|
| 7mm Ultra-Lite - 24 PACKS |
Ultra-Lite
(Reference #670-200PL)
$3.95 | PURPLE
22 In Stock | |
Ultra-Lite
(Reference #670-200-81)
$3.95 | ORANGE
3 In Stock | |
|
| 7mm Ultra-Lite - 96 PACKS |
Ultra-Lite
(Reference #671-200PL)
$14.95 | PURPLE
23 In Stock | |
|
Studding Template(Reference #725-921)
Use this guide to mark out patterns for 72, 96, 120, 144 or super aggressive pattern of 192 studs on 48 rib tracks. You have the option of using the guide to mark out a pattern before you drill or drill right through this metal template. LIMITED TO CURRENT STOCK
1 In Stock
$14.95
|
|
