| | |
 | TraxMat(Reference #TRAXMAT)
BY CALIBER
The Best Traction Mat Available
Stop the damage to your trailer decking or ramp from damage cause by studded tracks.
Oversize 18" wide x 54" or 72" long and 1/2" thick rubber mat gives optimum protection.
Unique bottom groove design allow moisture to dissipate, allowing the deck to dry out and prevent rotting caused by some other track mats on the market.
Provides excellent traction when loading your snowmobile.
Mounting hardware included.
Instruction Sheet
|
| |
TraxMat
(Reference #13210)
$28.95 | 54" LONG
13 In Stock
| |
TraxMat
(Reference #13211)
$37.95 | 72" LONG
2 In Stock
| |
|
 | Trailer Traction Mat(Reference #122-033)
16" x 72" x 3/8" tough rubber traction mat to protect your trailer bed from track or stud damage. Designed to allow air space between trailer bed and mat to prevent bed rot. Mounting hardware not included.
7 In Stock
$24.95
|
| |
|
Grips - Trailer Grip System(Reference #710-123)
BY CALIBER
Trailer Snowmobile Track Grip Systems.
Grips are extremely durable and manufactured from recycled HDPE.
Grips eliminate track freeze-down on your trailer.
Provide superior performance compared to similar competitive products.
Excellent traction and braking control while loading or unloading.
Grips save trailer decking wear 'n tear caused by track studs.
Each packaged set consists of 6 - 15" Grips complete with stainless steel attaching hardware and mounting instructions.
Instruction Sheet
16 In Stock
$18.95
|  |
| |
|
Multi-Glides(Reference #MULTI-GLIDE)
BY CALIBER
Plastic construction provides friction-free and effortless loading and unloading.
Deep-channel design actually suspends carbide wear rods.
Multi-Glides provide up to 7" of ski stance width variance.
Multi-Glides Wide provide up to 11" ski stance variance.
Saves trailer decking wear 'n tear
Sets include glides and mounting hardware to complete one side of a 10' trailer (4 - 5' pieces).
Does not include track grips - order separately if desired.
Instruction Sheet
|  |
| |
Multi Glides
(Reference #13305)
$66.95 | 6" - 4 Channel
12 In Stock
| |
Multi Glides - WIDE
(Reference #13306)
$75.95 | 8" - 6 Channel
12 In Stock
| |
|
 | Multi-Glides Low Pro(Reference #LOW-PRO)
BY CALIBER
Protects trailer deck from carbide damage
Available in 6" & 8" width (8" accomodates dual runner skis)
Lower profile design allows the trailer to be used for multiple purposes, as well as offering a lower price.
Glide channels suspend carbide inserts to create friction-free loading and unloading.
Each set completes a typical 10' 2-place trailer (both sides: 8 - 5' pieces) - does not include trailer Grips - packaged with stainless steel attaching hardware.
Easily installed with simple hand tools in approximately 15 minutes.
Instruction Sheet
|
| |
Multi Glides - Low Pro (#13320)
(Reference #710-124)
$113.95 | 6" WIDTH
0 In Stock
| |
Multi-Glides Low Pro
(Reference #13322)
$132.95 | 8" WIDTH
13 In Stock
| |
|
Low Pro Part(Reference #0121)
6" Glide x 5 feet (each)
31 In Stock
$17.95
|
|
|
Low Pro Part(Reference #0122)
8" Glide x 5 feet (each)
40 In Stock
$18.95
|
|
|
Low Pro Part(Reference #0103)
Stainless Steel Screws - package of 8. (does 1 5' section)
19 In Stock
$2.95
|
|
|
 | PaddleGrabber(Reference #122-035)
TRAILER TRACTIONOne piece molded gridEasy installationPositive track grabTrailer bed stays dry - no moisture trappedProvides traction for ATV's alsoIncludes stainless mounting hardware16" x 45" (2 pieces) - overall length is 45"
3 In Stock
$26.95
|
| |
|
| GripGlides Finally, an innovative accessory to help load your snowmobile and ATV. This innovative design features grips for ATV wheels and a glide pattern to suspend snowmobile wear bars for easy loading. Three Grip Glide packages are available - choose below. |
|
Grip Glides(Reference #13350)
For 10' Tilt Trailer - One Side
22 Pieces
6 In Stock
$52.95
|  |
| |
|
 | Grip Glides(Reference #13351)
For Enclosed Trailer with Ramp-Door
32 Pieces
4 In Stock
$75.95
|
| |
|
Grip Glides(Reference #13352)
Ramp Kit for Open Frame Ramp
16 Pieces
0 In Stock
$37.95
|  |
| |
|
 | Gatorbaxx(Reference #122-068)
Gatorbaxx are modified multi-glides and work great for snowmobiles and wheeled vehicles. The Gatorbaxx are cross cut to make them more universal. The cross cut design allows ATVs and lawn mowers more grip when loading and unloading. It also makes the loading ramp less slippery when walking up and down with snow boots. Includes mounting hardware.
5 In Stock
$89.95
|
| |
|
Ski Guides(Reference #122SKIGUIDE)
Think of Guides as a friction reducing highway for sled skis on your trailer. A set comes with 22 sections 12" in length, 5 3/4" wide. You use 18 as ski paths and 4 as traction cleats for your track. Ski Guides make loading and unloading very easy. They also help if you have to pull a sled from a trailer or push a dead sled onto the trailer. Pre-drilled for fasteners. Alignment tabs help lock the sections together. Does NOT include mounting hardware.
|  |
| |
Ski Guides
(Reference #122-050)
$75.95 | Set of 22 / BLACK
5 In Stock
| |
Ski Guides
(Reference #122-050-82)
$75.95 | Set of 22 / RED
2 In Stock
| |
Ski Guides
(Reference #122-050-86)
$59.95 | Set of 22 / PURPLE
4 In Stock
| |
Ski Guides
(Reference #122-051)
$3.95 | 12" Section / BLACK
0 In Stock
| |
Ski Guides
(Reference #122-051-82)
$3.95 | 12" Section / RED
0 In Stock
| |
Ski Guides
(Reference #122-051-86)
$3.95 | 12" Section / PURPLE
0 In Stock
| |
