| | |
 | Universal Template Ref: COMB-TEMP
The studding experts at Woody's have designed a template that includes the Trail Template, Double Digger and the Performance Template patterns on ONE TEMPLATE. The Woody's Universal Template will have patterns from 48 to 192 studs with exception of the 72 stud pattern. One template gives you the ability to add to your stud pattern without waiting for a different template. Constructed from heavy card stock with a laminate protective cover that will fit 15" wide track configurations.
Technical Info
14 In Stock
$11.95
|
|
|
Universal Template Ref: COMB-TEMP-P
$24.95
1 In Stock |
|
For those that will use the template a number of times, this template is the same as the COMB-TEMP above, except it is clear polycarbonate.
Technical Info
|
|
 | 13.5" Template - 128" & 144" Track Ref: FCSC-TEMP
For 13.5" wide track as used on Firecat & Sabercat. 128" and 144" track lengths
Technical Info
0 In Stock
$14.95
|
CURRENTLY OUT OF STOCK |
|
128" Track Template Ref: 128-TEMP
For 14" and 15" wide x 128" tracks
8 In Stock
$19.95
|  |
|
|
 | Long Track Template Ref: LONG-TEMP-2
A special Long Track Template to fit tracks 15" x 136" and 15" x 144" with an added cut-away feature to make expandable for 16" wide tracks. It has multiple options for center belt studding with or without Double Digger support plates.
Technical Info
1 In Stock
$19.95
|
|
|
| Woody's Track Templates
|
Template Ref: 725-941
2.52 Pitch - Single Ply Track
5 In Stock
$14.95
|
|
Template Ref: 725-940
2.86 Pitch - Single Ply Track
4 In Stock
$19.95
|
|
Template Ref: 725-943
2.86 Pitch - 2 Ply Track
2 In Stock
$19.95
|
|
Template Ref: 725-942
3.00 Pitch - Single Ply Track
1 In Stock
$19.95
|
|
|
 | Track Marker Ref: TRAK-MARK
3 In Stock
$7.95
|
|
|
Track Cutter Ref: TC-CUTTER
Cust neat, clean hole in track for easy installation of studs. Can be used in hand drill or drill press. Ejects rubber slugs automatically. These are heavy duty, shop grade track cutter tools. Manufactured from top quality drill rod. Can be resharpened several times.
|  |
|
Track Cutter Ref: TC-15
For 1/4" T-Nut Studs and 7mm Push Thru
21 In Stock
$9.95
|
|
Track Cutter Ref: TC-16
For 7mm T-Nut Studs and 5/16" Push Thru
56 In Stock
$9.95
|
|
|
 | Stud Tool Ref: 725-925
Use this tool for installing and removing push-through studs. The handle is made from premium aluminum. Each tool comes with an extra hex bit.
0 In Stock
$22.95
|
CURRENTLY OUT OF STOCK |
|
Replacement Hex Bits Ref: 725-934
Set of 2 replacement hex bits for stud tool #725-925 listed above.
3 In Stock
$5.95
|
|
|
 | Socket Style Nut Puller Ref: NUTPULLER
Reduces studding time by quickly setting T-nut into track
|
|
Nut Puller
Ref: 725-920
$16.95 | 7mm
5 In Stock |
|
Nut Puller
Ref: NP-10
$16.95 | 1/4"
0 In Stock |
CURRENTLY OUT OF STOCK |
|
Square Support Plate Indexing Tool Ref: SPI-TOOL-5
For 5/16 Square Backers
The square support plate indexing tool is a real time saver. Attach the tool directly to a standard 3/8" ratchet, align the square support plate flush with the track lugs, and then tighten the nut. Aligning the support plates can contribute to track longevity and your safety.
1 In Stock
$17.95
|  |
|
|
 | Track Tension Tool Ref: TRAK-TOOL
Make sure the tension of your track is correct. Use Woody's Track Tension Tool to help stay within the manufacturer's guidelines.
12 In Stock
$35.95
|
|
|
Spec Gauge Ref: ASG-4100
This gauge is a must for all serious racers and race tech people. It checks the race legal installation of studs and carbide runners particularly if you are sharpening your own.
7 In Stock
$13.95
|  |
|
|
 | Hand Grinding Wheel Ref: AGW-4500
Here is a handy device for sharpening carbides right on the skis. This thin, 4 1/2" wheel fits most hand grinders. (Follow manufacturers safety instructions) 4 1/2" black silicon wheel
0 In Stock
$7.95
|
CURRENTLY OUT OF STOCK |
|
Carbide Grinding Wheel Ref: AGW-WHL
This special grade grinding wheel is designed for sharpening just carbide runners and studs. It will help maintain sharp edges and points or alter stud point angles. Not recommended for general grinding. Includes arbor shim. (Follow manufacturers safety instructions)
|  |
|
Grinding Wheel Ref: AGW-4000
1/2" Wide x 6"
0 In Stock
$24.95
|
CURRENTLY OUT OF STOCK |
Grinding Wheel Ref: AGW-4100
1" Wide x 6"
0 In Stock
$31.95
|
CURRENTLY OUT OF STOCK |
Grinding Wheel Ref: AGW-4200
1" Wide x 7"
0 In Stock
$33.95
|
CURRENTLY OUT OF STOCK |
|
Shallow Socket Tool Ref: SCW-TOOL
Woody's developed a unique shallow socket for installing studs without touching the surface of the support plate. Works ideal with colored support plates. The 5/16" socket is deep enough to install studs up to 1.575" length.
|  |
|
Shallow Socket Tool
Ref: SCW-4500
$18.95 | 7mm
1 In Stock |
|
Shallow Socket Tool
Ref: SCW-4505
$18.95 | 5/16"
1 In Stock |
|
|
 | Race Stud Gauge Ref: 2287-00
Zinc plated steelConvenient hole to hang on workbenchMaximum stud height of 3/8" for oval/snow crossMaximum stud height of 3/4" for dragsMaximum wearbar height 5/8" and width 5/8"Minimum wear bar height 5/8" and width 1/2"Maximum carbide in runner 10"Maximum 60 degree angle on carbide runnerMaximum width of backer plate 2 1/4"Minimum 3 3/4" traction device from edge of track
6 In Stock
$13.95
|
|
|
Ski-Doo Coolant Hose Protector Ref: 298-106
A must when studding the S-2000, F-2000 or CK3 chassis. Instructions and mounting harware included.
Installation Instructions
3 In Stock
$14.95
|  |
|
|
 | Stud Sharpener Ref: 725-SHARP
FOR STEEL STUDS ONLY - NOT CARBIDE TIPPED STUDS
Sharpen 300 steel studs accurately in less than a 1/2 hour - 30, 45 or 60 degree pointRecommedned by stud manufacturers and the fastest racers - produces a needle pointKeep your studs in spec - unique clog proof design prevents reduction in stud lengthFour precision, chip resistant inserts can be rotated 8 times for long lasting durability
|
|
Stud Sharpener Ref: 725-922
60 Degree Tip
4 In Stock
$67.95
|
|
Stud Sharpener Ref: 725-924
30 Degree Tip
0 In Stock
$64.95
|
CURRENTLY OUT OF STOCK |
|
Sharpener Rebuild Kit Ref: 725-933
Includes replacement carbide inserts for stud sharpener above.
3 In Stock
$17.95
|
|
|
 | Loctite® Threadlocker Ref: LOC-2900
Woody's® introduces this "wicking" style threadlocker to the snowmobile industry. #290 Threadlocker uses capillary action to penetrate into the threads after t-nut style studs are installed in the track. 6ml
1 In Stock
$16.95
|
|
