| | |
 | Quikshift Threaded Pin Kit Ref: 815-QSPINKIT
FOR SKI-DOO TRA II, III & V CLUTCHES
Economical performance upgrade for faster accelerationTwo sizes to fit both high and low altitude applicationsCoated steel pinsUp to 13 different weight combinationsKits contain set of 3 pins, adjustment screws, cotter keys and instructions
|
|
Threaded Pin Kit
Ref: 815-503
$39.95 | 4.5 to 9.5 GRAM (aluminum)
6 In Stock |
|
Threaded Pin Kit
Ref: 815-504
$39.95 | 10.5 to 15.5 GRAM
6 In Stock |
|
Threaded Pin Kit
Ref: 815-505
$39.95 | 14.3 to 20.1 GRAM
6 In Stock |
|
Threaded Pin Kit
Ref: 815-513
$84.95 | 3.6 to 20.1 GRAM
0 In Stock |
CURRENTLY OUT OF STOCK |
|
Heavy Adjustable Pin Kit Ref: 815-PINKIT
FOR SKI-DOO TRA CLUTCH
Allows wide range of adjustment.
| |
|
Adjustable Pin Kit
Ref: 815-501
$26.95 | 13 to 19 GRAM
Instruction Sheet
0 In Stock |
CURRENTLY OUT OF STOCK |
Adjustable Pin Kit
Ref: 815-502
$26.95 | 11 to 16 GRAM
Instruction Sheet
0 In Stock |
CURRENTLY OUT OF STOCK |
Adjustable Pin Kit
Ref: 815-511
$26.95 | 16 to 23 GRAM
14 In Stock |
|
|
TRA Heavy Pin Kit Ref: 930954
13.8 to 23.2 gramTungston inserts
1 In Stock
$84.95
|  |
|
|
 | TRA Retainer Clips Ref: 725-415
Holds clutch buttons in place during assembly and dis-assembly. Set of 3
62 In Stock
$18.95
|
|
|
 | Clutch Rollers - Ski Doo TRA Ref: TSR
FOR SKI-DOO TRA CLUTCHESGreat tuning component for stock TRA arms or Thunder Shift ArmsRollers are heat treated, bushed and ISR stock legalTwo sizes for fine tuning. 1mm oversize (12.5 grams each) or 2mm oversize (15.5 grams each). Stock Ski-Doo rollers are 10.0 grams.Sold in sets of 3
|
|
|
SKR155 Rollers
Ref: SKR155
$66.95 | Standard Size
63 In Stock |
|
SKR165 Rollers
Ref: SKR165
$66.95 | 1mm Oversize
8 In Stock |
|
TSR2 Rollers
Ref: SKR175
$66.95 | 2mm Oversize
2 In Stock |
|
Replacement Bushings
Ref: CAB230
$38.95 | Replacement Bushings
Set of 3
Will also fit OEM rollers
(except '09 & newer)
7 In Stock |
|
|
| Clutch Rollers - Yamaha Ref: TSR-Y
FOR YAMAHA CLUTCHES
Tuning component for stock clutches or when using Heavy Hitter Arms.Hardened steel rollers are bushed and ISR stock legal.Smaller size increase force of cam arms, larger size decreases force.More economical than helixes with more consistent results.Fits all late model Yamahas (1998-10) with 9mm ID.Sold in sets of three with installation instructions.
|
|
|
YAR148 Rollers
Ref: YAR148
$66.95 | 14.8mm
1 In Stock |
|
YAR158 Rollers
Ref: YAR158
$66.95 | 15.8mm
0 In Stock |
CURRENTLY OUT OF STOCK |
Replacement Bushings
Ref: CAB250
$43.95 | Replacement Bushings
Set of 3
Will fit OEM rollers also
1 In Stock |
|
|
 | Thunder Shift Arms Ref: TSA
FOR SKI-DOO TRA II, TRA III AND TRA V CLUTCHESPatented weight distribution method is designed to “get the power to the ground”ISR stock legal with no clutch machining required & allows full use of clicker adjustmentsBushed aircraft billet aluminum arms are up to 5 times stronger than stockGram weight matched sets available in two sizes to fit all engines. Standard weight (similar to stock) and light weight which is 7 grams lighter than standardFully adjustable in low and mid range, optional threaded pins allow top end tuningBetter acceleration and faster backshift for unequaled performanceFull fastener kit allows adjustment resolution down to 0.4 grams, like having hundreds of ramp profiles to get the perfect shift curveSold in set of 3 arms with tuning fasteners and easy to understand tuning manual
|
|
Thunder Shift Arms
Ref: TS-290
$275.95 | TRA - Light
(top photo)
1 In Stock |
|
Thunder Shift Arms
Ref: TS-295
$275.95 | TRA - Std
(bottom photo)
0 In Stock |
CURRENTLY OUT OF STOCK |
Thunder Shift Arms
Ref: TS-395
$275.95 | TRA III
1 In Stock |
|
Thunder Shift Arms
Ref: TS-495
$285.95 | TRA V (steel arms)
2 In Stock |
|
|
Quick ClickersTM Ref: 815515
Patent #7726927
THE ORIGINAL, not a cheap copy!
Rapid RPM adjustment mechanisms that directly replaces the stock locking-nuts on Ski-Doo TRA Series centrifugal snowmobile clutch clicker-bolts. This unique device allows for Quicker changes for maximum engine speed to optimize horsepower output.
Sold per set
6 In Stock
$44.95
|  |
|
|
 | Wide Range Thunder Shift Pin Kit Ref: 200-933
Offers the widest range of pin weight combinations on the marketOne kit allows pin weight adjustment from 3.8 to 25 grams.2 to .4 gram increments allows tuning any engine at any altitudeGreat addition to Heavy Hitter TRA Arms for maximum performanceFits TRA II, III or V clutchesKit includes 6 pins, fasteners, wrenches, installation instructions and tuning guide
3 In Stock
$95.95
|
|
|
Ski-Doo TRA Ramps Ref: SD-RAMP
Sold per set
|  |
|
|
| TRA 2 Ramps Sold per set. |
Ski-Doo Ramp
Ref: 950-001
$94.95 | Compares to 297
1 In Stock |
|
Ski-Doo Ramp
Ref: 950-002
$94.95 | Compares to CF1
1 In Stock |
|
Ski-Doo Ramp
Ref: 950-004
$94.95 | Compares to PX
1 In Stock |
|
|
| TRA 3 / TRA 5 Ramps Sold per set |
Ski-Doo Ramp
Ref: 950-015
$94.95 | Compares to 414
3 In Stock |
|
Ski-Doo Ramp
Ref: 950-011
$94.95 | Compares to 412
2 In Stock |
|
Ski-Doo Ramp
Ref: 950-020
$94.95 | Compares to 415
2 In Stock |
|
Ski-Doo Ramp
Ref: 950-010
$94.95 | Compares to 419
4 In Stock |
|
Ski-Doo Ramp
Ref: 950-012
$94.95 | Compares to 433
0 In Stock |
CURRENTLY OUT OF STOCK |
|
| TRA 3/TRA 5 Custom Ramps TEAM INDUSTRIES - Sold per set. |
Ski-Doo Custom Ramp
Ref: 950-013
$94.95 | 434 ramp with .040 laid down end for more mph
1 In Stock |
|
|
TRA 3/TRA 5 Custom Ramps
FETT BROS PERFORMANCE - Sold per set
Aggressor SeriesCustom machined ramp with aggressive profileHard acceleration throughout rpm rangeGreat gains with stock or aftermarket armsAdjustable pin kit will be needed as these arms PULL HARD! |
Ski-Doo Custom Ramp
Ref: 950-009
$103.95 | Super aggressive shift throughout
Best on 800's and higher horsepower sleds
0 In Stock |
CURRENTLY OUT OF STOCK |
Ski-Doo Custom Ramp
Ref: 950-018
$103.95 | Aggressive shift in
low and mid range
Best on 600's and
mid horsepower sleds
2 In Stock |
|
|
TRA 3/TRA 5 Custom Ramps
FETT BROS PERFORMANCE - Sold per set
Accelerator SeriesBolt in trail performance using stock rollers and springsEliminated issues with tuning and bushing life of oversize rollersMachined billet ramps feature a modified stock profileAccelerates harder, stronger through the mid-range, and better top endAdjustable pin kit is recommended for maximum performance |
Ski-Doo Custom Ramp
Ref: 950021
$103.95 | Modified profile of stock 412 ramp which is stock on
'07-11 500SS/600 carb;
'09-11 600MXZ E-Tec
0 In Stock |
CURRENTLY OUT OF STOCK |
Ski-Doo Custom Ramp
Ref: 950022
$103.95 | Modified profile of stock 414 ramp which is stock on '07 800HO MXZ; '08 600SDI MXZ/Renegade;
'08-11 800R MXZ;
'10-11 800R E-Tec MXZ
0 In Stock |
CURRENTLY OUT OF STOCK |
|
 | TRA Quick Adjust Clickers Ref: TRA-QAC
Change your TRA clutches in a second. Just push and turn, and your clicker position is changed. Will work in all TRA clutches and install in minutes. This is a must for anyone that races, mountain rides, or just likes to tune the sled. Set of 3.
|
|
TRA Quick Adjust Clickers
Ref: 121-164
$64.95 | Thru 2010
17 In Stock |
|
TRA Quick Adjust Clickers
Ref: 121-212
$64.95 | 2011-12
5 In Stock |
|
|
QRS Alignment Kit - Ski Doo Ref: 121-211
Works on all 2008-12 XP ModelsAllows the QRS jackshaft assembly to be shimmed out for precise alignmentEasy installationComes complete with all necessary shims
Instructions
2 In Stock
$85.95
|  |
|
|
 | Dalton Pro Ultimate Stainless TRA Pins Ref: 815-506
Heat Treated stainless outer housing is high strength and precision CNC machined for exact fit and ultra smooth, hard, corrosion free surface. Some other heavy pins are made from exotic metals that are brittle, have poor machinability and surface finish and cause excessive wear on the roller bushings.
Weight adjustable 14.5 to 25 grams! With these pins the weight is alway centralized for balance and not loaded to one end.
Fully clicker adjustable! Many adjustable pins above 21g must remain in #4 or higher for clearance of the governor cup. Dalton Pro Ultimate Stainless pins can be use in ANY CLICKER POSITION allowing much more flexibility when clutch tuning.
5 In Stock
$119.95
|
|
|
Optional SHD Insert For 27 Gram Ref: 815-507
$69.95
2 In Stock |
|
This in an Optional SHD Insert for 27 gram on above pins. Set of 3.
|
|
Dalton Stainless Pins Only Ref: 815-512
$66.95
4 In Stock |
|
Stainless pins only for above Pin Kit #815-506. Sold per set.
|
|
Dalton Pro Premium TRA Pins Ref: 815-DPP
These pins are manufactured from high quality billet alloy steel and through hardened and tempered. They can be used in any clicker position. A new level of quality and adjustability for pins in this price range.
|  |
|
Dalton Pro Pin Kit
Ref: 815-510
$39.95 | Midweight
14.5G - 20.4G
6 In Stock |
|
Dalton Pro Pin Kit
Ref: 815-514
$39.95 | Lightweight
11.5G - 17.4G
3 In Stock |
|
|
 | QRS Helex Removal Tool - Ski Doo Ref: 151106
This reversible ratcheting wrench is used to remove and install the helix for all 2008-12 Ski-Doo QRS clutches without removing the jackshaft.Single-end, flat wrench is 9 3/4" long with a removable/replaceable shortened T-40 torx bitLow profile design allows for easy access to the helix bolts between the frame and the clutchVinyl grip provides a comfortable ergonomic grip and prevents the wrench from scratching or marring your machine
Instructions
1 In Stock
$49.95
|
|
|
QRS Clutch Tool - Ski Doo Ref: 725-QRS
A compression tool for the Ski-Doo QRS driven clutch used on 2008-11 Ski-Doo XP Series models. Makes spring changes easy.
|  |
|
QRS Clutch Tool
Ref: 725-469
$74.95 | 2008-09 Models
1 In Stock |
|
QRS Clutch Tool
Ref: 725-470
$74.95 | 2010-11 Models
6 In Stock |
|
|
 | Ski-Doo QRS Belt Adjuster Ref: 175-QRS
A much improved belt deflection adjuster for the QRS Driven Clutch. Made from billet aluminum, it will not crack or break like the OEM plastic one. Quick and easy belt adjustment as well as fast belt removal are main benefits of the easy adjuster.
|
|
Ski-Doo QRS Belt Adjuster
Ref: 175-205
$74.95 | 2008-09 Models
pictured
3 In Stock |
|
Ski-Doo QRS Belt Adjuster
Ref: 420825
$67.95 | 2010-12 Models
1 In Stock |
|
|
TRA Clutch Holder Ref: 151103
Holds all TRA3 and newer clutches the safest and only way The only aftermarket holder capable to hold 2006 TRA and newer clutches Made from high tensile steel and corrosion finish, high strength Delrin to protect the clutch from scratching
Instruction Sheet
2 In Stock
$39.95
|  |
|
|
 | TRA Compression Tool Ref: 91002067
Works on Ski-Doo TRA primary clutches with any TRA primary spring. A must have for tuners or racers. Pre-drilled for bench mounting. Made in the USA.
0 In Stock
$61.95
|
CURRENTLY OUT OF STOCK |
