| | |
 | Shock King' Compression Tool Ref: 725-950
The Shock King tool will compress shock springs found on the front and rear suspensions of snowmobiles and dual shock motorcycles. With just a bit of practice you will be able to change a shock spring in 30 seconds or less without gritting your teeth. The Shock King is the best tool ever devised for removing springs.
2 In Stock
$33.95
|
|
|
Light Duty Spring Compressor Ref: 91002061
For Springs up to 200 lbsFully adjustable to fit most ATV, snowmobile and motorcycle shocks. Can be used in a vice or permanently bench mounted. Includes a safety cap that prevents the shock from slipping out during compression.
0 In Stock
$66.95
|  |
CURRENTLY OUT OF STOCK |
|
 | Heavy Duty Spring Compressor Ref: 91002060
For Springs 200 to 500 lbsFully adjustable to fit most ATV, snowmobile and motorcycle shocks. This heavy duty model can handle very large shocks and springs. Huge handle provides maximum leverage for those heavy rate springs. Recommend permanent bench mounting. Includes a safety cap that prevents the shock from slipping out during compression.
0 In Stock
$118.95
|
CURRENTLY OUT OF STOCK |
|
Shock Spring Compressor Ref: 725-121
Lever action shock service tool that makes spring compressing easy while one hand is free to remove spring retainer.Works on all snowmobile, motorcycle and ATV shocks that require a spring compressor.Durable powder coat finish.
Instruction Sheet
0 In Stock
$32.95
|  |
CURRENTLY OUT OF STOCK |
|
 | Bend-A-Light Ref: BL
Flexible flashlight's wire neck holds the shape you give it! High-intensity optical beam (only 1/4" diameter) allows you to direct light deep inside any engine or into tight spots. Ideal for checking burn on top of a piston.
|
|
Bend-A-Light
Ref: 725-154
$27.95 | 10" SHAFT
20 In Stock |
|
Bend-A-Light Replacement Bulb
Ref: 725-140
$7.95 | Replacement Bulb
52 In Stock |
|
|
Universal Heavy Duty Flywheel Puller Ref: 20-205
For 2-Stroke Snowmobile Models
Strong and built to last for years. This puller is desinged with specially shaped slots that allow its use on all two-stroke snowmobile flywheel bolt patterns. Puller includes high quality grade 10.9 bolts, six 6mm and four 8mm.
7 In Stock
$56.95
|  |
|
|
 | Flywheel Puller Ref: 725-029
Universal fit puller. Includes 6 - 6mm & 4 - 8mm bolts. Can be drilled to other applications.
8 In Stock
$40.95
|
|
|
Piston Pin Puller Ref: 725-003
Piston pin puller easily removes piston pins up to 80mm long and 20mm in diameter without damage to the piston.
30 In Stock
$22.95
|  |
|
|
 | Deluxe Piston Pin Puller Ref: 08-0472
Interchangeable piston adapters for use on both long skirt and short skirt (slipper) pistonsFits all piston pins from 12mm (1/2") to 24mm (1")Made of 6061 aluminum with non-marring aluminum adapters and durable blue anodized finishPatent pending
0 In Stock
$68.95
|
CURRENTLY OUT OF STOCK |
|
Piston Pin Puller Ref: 20-181
Remove or install piston wrist pins easily with this new puller. The body of this puller is made of a high strength composite which eliminates marking, scarring or distortion of the piston. The face of the body of this puller is specially designed to bridge recessed wrist pin bosses found on late model pistons in order to provide a straight, precise pull each time. It includes three different sized nuts, which fit wrist pins from 15mm through 24mm.
19 In Stock
$54.95
|  |
|
|
 | Piston Pin Puller Ref: 725-002
Will pull pin diameters from 14mm to 22mm.
13 In Stock
$38.95
|
|
|
Ignition Timing Light Ref: 725-185
High intensity strobe timing light. Works on all types of ignition systems including CDI and 3 cylinder engines. Totally self contained, requires no outside power source. (Uses 2 D cell batteries)
0 In Stock
$119.95
|  |
CURRENTLY OUT OF STOCK |
|
 | Economy Timing Light Ref: 725-186
Timing light for 2-cycles and/or any engine. Performs at high RPM where many automotive lights will not. Battery operated with two "D" size batteries (not included). Inductive pickup for sparkplug wire.
0 In Stock
$69.95
|
CURRENTLY OUT OF STOCK |
|
Two Stroke Timing Gauge Ref: 08-0250
Kit includes a dial indicator with extensions and a 14mm spark plug thread adapterAllows inspection and adjustment of ignition timingGauge face size 1 1/2"Includes foam lined wood case
2 In Stock
$124.95
|  |
|
|
 | Compression Gauge Ref: 725-755
14mm screw in styleHeavy duty steel housingReads to 200 psi
1 In Stock
$27.95
|
|
|
Compression Gauge Ref: 725-750
A superior quality professional instrument manufactured for easy and accurate testing of engine compression. It is simple, tough and dependable - an essential tool for performing a complete engine analysis. 14mm screw in styleReads to 300 PSIAccuracy 2%Small compression chamber for fast reading - only 2 or 3 starter pulls requiredRigid construction allows 'no hands' operation
0 In Stock
$32.95
|  |
CURRENTLY OUT OF STOCK |
|
 | Carburetor Vacuum Synchronizer Ref: 4025-001
Gives mechanics and technicians a visual, rapid means to synchronize multiple carburetors. It replaces bulky gauges and hoses. This model is hand held over carburetor opening.
61 In Stock
$39.95
|
|
|
Optimate 3+ Ref: 725-196
OptiMate 3+ desulfater-charger will save neglected, deep discharged batteries other smart chargers can't!
It will safely maintain your vehicle's battery during long term storage
Hook up the battery and OptiMate immediately checks if the battery is sulfated or not. If it is OptiMate applies 'first aid' in the form of a voltage of up to 20V at low current for up to 2 hours, to recover the battery so it can again accept a charge.It then 'bulk' (constant current) charges the battery, the starting stage if no sulfation was detected. There-after the unique 'verification' (pulsing charge & check) stage provides low voltage desulfating care and tops off the charge.Optimate then tests & confirms whether the battery can retain sufficient charge to crank an engine before it engages long term maintenance mode.During maintenance, it "floats & tests" 30 minutes on, 30 minutes off, so the battery is always 100% ready, but never overcharged.Recommended for all 12V lead-acid batteries from 2Ah to 45Ah, although it can also maintain larger batteries (it will just take longer to charge).
6 In Stock
$53.95
|  |
|
|
 | Optimate 4 Ref: 725-194
Optimate 4, the desulfater-charger with micro processor control, saves neglected, deep discharged SLA batteries other smart chargers can't, tests and displays actual battery condition.Desulfating 'vehicle sensing' recovery mode for flat batteries down to 2V6 step charge program dialed in for 12V Sealed Lead-Acid batteriesSmart storage charging system - alternating charge / test cycle with battery condition display (5 possible results, updated hourly)10 LED status panel includes charge current bar graph displayWeatherproof enclosure with integrated wall mounts.For sealed 12V Lead Acid Batteries
6 In Stock
$62.95
|
|
|
Accumate Mini Charger Ref: 725-195
A 0.9A charger for 12 Volt batteries. Select the voltage, hook it up to the battery and this reliable, temperature compensated, 3-step charger will do the rest. The program is ideal for starter and Deep Cycle / stand-by batteries and is totally safe for long term connection to the battery without overcharging.
10 In Stock
$31.95
|  |
|
|
 | TestMate Mini Ref: 725-190
THE BATTERY ANALYZER FOR ALL 12V STARTER BATTERIES
Starting problems? Always replacing batteries? Charging system not performing?
The TestMate mini is more than just a voltmeter, it's a super fast recorder of instant volt drop during 'engine' cranking - the best indication of a starter battery's ability to deliver power & it checks if the charging system is able to bring the battery back to full charge.
Step 1 Checks battery voltage
Step 2 Checks battery cranking power
Step 3 Checks vehicle charging system
For any vehicle with a 12V battery system18 LEDS indicate full cranking & charging rangeLight & water resistantIncludes mounts for on road testing
1 In Stock
$26.95
|
|
|
Raider® Smart Chargers Ref: 725SC
Raider Smart Chargers are high efficiency / lightweight / compactSuitable for all types of 12V batteries (including GEL and AGM)LED indicators - easy to useReverse polarity / short circuit / over temperature protectionAll Raider Smart Chargers are ETL and FCC approvedSmart charger / maintainer
|  |
|
Raider Smart Charger
Ref: 725176
$28.95 | 12 Volt - 2 Amp
0 In Stock |
CURRENTLY OUT OF STOCK |
Raider Smart Charger
Ref: 725177
$40.95 | 12 Volt - 6 Amp
4 In Stock |
|
Raider Smart Charger
Ref: 725178
$66.95 | 12 Volt - 12 Amp
0 In Stock |
CURRENTLY OUT OF STOCK |
|
EZ Tach +Plus Ref: 328
RPM Range - 0 to 20,000 rpmResolution - 1 rpm
Versatile instrument can measure RPM on a wide variety of engines from string trimmers to automotiveReads engine revolutions from 0 to 20,000 RPMPicks up RPM signal wireless or with supplied inductive pickupGreat for setting idle speeds!Built-in LED flashlight which can be used while taking measurementsBacklit LCD displayAccuracy +-10 RPMApplications include: outboards, snowmobiles, motorcycles, small engines, generators, lawn equipment, ATV's, automotive and more
4 In Stock
$62.95
|  |
|
|
 | Spring Thing Ref: 725-ST
"Spring Thing" spring puller is precision cut from heavy gage material for durability and longevity. A unique push pull feature makes those hard to reach places a snap. For comfort, the handle has a PVC coating.
|
|
Spring Thing
Ref: 725-900
$16.95 | STD - 8.5"
81 In Stock |
|
Spring Thing
Ref: 725-901
$18.95 | XL - 12"
84 In Stock |
|
|
Exhaust Spring Tool Ref: 725-008
Economy Model
A specially built tool for snowmobile and motorcycle exhaust spring installation and removal. Rubber dipped t-handle and case hardened, nickel chrome plated hook.
11 In Stock
$9.95
|  |
|
|
 | Spring King Ref: 725-006
A specially built tool for snowmobile and motorcycle exhaust spring installation and removal. Rubber dipped t-handle and case hardened, nickel chrome plated hook.
37 In Stock
$10.95
|
|
|
Exhaust Spring Tool Ref: 725014
Deluxe Model with Bend
A specially built tool for snowmobile and motorcycle exhaust spring installation and removal. Rubber dipped t-handle and case hardened, nickel chrome plated hook.
1 In Stock
$14.95
|  |
|
|
 | Spring Tool Ref: SPR-TOOL
Woody's Spring Tool gives you better leverage to get to those hard to reach areas. Use this tool to push, pull or twist springs into place. 17" Shaft. Made in the USA.
0 In Stock
$14.95
|
CURRENTLY OUT OF STOCK |
|
Deluxe Spring Puller Ref: DLX-SP
Ultra heavy duty18" length1/4 turn adjustable handleStainless steel shaft / aluminum handle
Instruction Sheet
|  |
|
Deluxe Spring Puller
Ref: 1864
$54.95 | Straight Shaft
0 In Stock |
CURRENTLY OUT OF STOCK |
Deluxe Spring Puller
Ref: 1864-15
$54.95 | 15o Bend
2 In Stock |
|
|
 | Piston Light Ref: 725-146
Fiber optic piston light will produce a bright light in the combustion chamber. More rugged and reliable than bulb type lights. Includes batteries, flashlight and fiber optic extension. 7" long.
15 In Stock
$14.95
|
|
|
Tension Adjustment Scale Ref: 20-182
An easy method of measuring tension. This new scale has a range of 0 to 25 pounds. It is very accurate and has a "tattle tale" marker to help measure more precisely. It can be used in many areas on a snowmobile that call for a specific tension such as secondary clutch, track tension, water pump belt tension, etc. A must for any performance minded tuner.
5 In Stock
$32.95
|  |
|
|
 | Flex Hone® Ref: FLEXHONE
Fast, efficient cylinder deglazing and cross hatching insures immediate ring seating - without appreciable stock removal. These unique flexible hones consist of globules of silicon carbide laminated to the ends of high density nylon. Ideal for port deburring of two-stroke engines, and essential for obtaining a plateaued finish. Powered by a portable electric drill. NOTE: Spin at 600-800 RPM
|
|
|
| 320 Grit - Nikasil Plated Cylinders
|
Flex Hone Ref: 725-237
64mm / Range 57-64mm
0 In Stock
$39.95
|
CURRENTLY OUT OF STOCK |
Flex Hone Ref: 725-235
70mm / Range 64-70mm
4 In Stock
$43.95
|
|
Flex Hone Ref: 725-233
76mm / Range 70-76mm
5 In Stock
$50.95
|
|
Flex Hone Ref: 725-231
83mm / Range 76-83mm
1 In Stock
$55.95
|
|
Flex Hone Ref: 725-239
89mm / Range 83-89mm
0 In Stock
$58.95
|
CURRENTLY OUT OF STOCK |
|
| 180 Grit - Cast Iron Bore Cylinders
|
Flex Hone Ref: 725-232
64mm / Range 57-64mm
3 In Stock
$26.95
|
|
Flex Hone Ref: 725-234
70mm / Range 64-70mm
1 In Stock
$28.95
|
|
Flex Hone Ref: 725-236
76mm / Range 70-76mm
3 In Stock
$33.95
|
|
Flex Hone Ref: 725-238
83mm / Range 76-83mm
0 In Stock
$36.95
|
CURRENTLY OUT OF STOCK |
|
 | Flex Hone® Oil Ref: FLEXHNOIL
Specifically formulated for use with Flex Hones
|
|
Hone Oil
Ref: 725-240
$9.95 | 1/2 PINT
6 In Stock |
|
Hone Oil
Ref: 725-241
$13.95 | QUART
2 In Stock |
|
Hone Oil
Ref: 725-242
$42.95 | GALLON
2 In Stock |
|
|
 | Ammco Cylinder Surfacing Hone Ref: AMMCOHONE
Premium quality engine hones for deglazing cylinders for fast ring seating and long life. Spring loaded for constant pressure. Flexable drive shaft. 2-7" hone uses 3/8" or larger drill. 1.5-3.5" hone uses 1/4" or 3/8" drill. Make your choice below.
|
|
Ammco Hone
Ref: 725-222
$89.85 | 2" TO 7" BORES
0 In Stock |
CURRENTLY OUT OF STOCK |
Ammco Hone
Ref: 725-224
$79.95 | 1.5" TO 3.5" BORES (pictured)
0 In Stock |
CURRENTLY OUT OF STOCK |
|
Ammco Ridgid Cylinder Hone Ref: 725-225
Ammco model 3950 comes complete with a metal storage box and removable drive shaft for easy adjustment and quick insertion into cylinders. Furnished with one set of #725-226 stones. Range is 1 7/8" to 2 3/4". Oversize stones range from 2 3/4" to 3 5/8".
0 In Stock
$399.95
|  |
CURRENTLY OUT OF STOCK |
|
| Replacement Stones for #725-225 above. Standard range is 1 7/8" to 2 3/4" . Oversize stones range from 2 3/4" to 3 5/8". |
Replacement Stones #3952 Ref: 725-226
STANDARD - FINE
0 In Stock
$49.95
|
CURRENTLY OUT OF STOCK |
Replacment Stones #3951 Ref: 725-227
STANDARD - COARSE
1 In Stock
$49.95
|
|
Replacement Stones #3955 Ref: 725-221
STANDARD - NICASIL CYLS
0 In Stock
$49.95
|
CURRENTLY OUT OF STOCK |
Replacement Stones #3956 Ref: 725-223
OVERSIZE - NICASIL CYLS
0 In Stock
$49.95
|
CURRENTLY OUT OF STOCK |
Replacement Stones #3954 Ref: 725-228
OVERSIZE - FINE
1 In Stock
$49.95
|
|
Replacement Stones #3953 Ref: 725-229
OVERSIZE - COARSE
1 In Stock
$49.95
|
|
