| | |
 | Nitrogen Charge Kit(Reference #155-364)
Contains regulator, hose and inflation needle and gauge assembly. Everything you need to connect to your nitrogen bottle.
1 In Stock
$314.95
|
| |
|
Regulator and Hose Only(Reference #155-361)
$209.95
0 In Stock |
|
Regulator and hose only for #155-364 kit listed above,
|
|
Inflation Needle & Gauge Assembly(Reference #155-350)
Needle style
300 psi capacity
2 In Stock
$129.95
|  |
| |
|
 | Replacement Needle Assembly(Reference #155-365)
Replacement for bent or broken needles. Comes as a complete safety unit.
2 In Stock
$99.95
|
| |
|
 | Gas Fill Tool & Gauge(Reference #3903GAUGE)
RydeFX's rebuildable gas fill tool can easily be disassembled a reassembled for needle replacement using standard wrench sizes. Gas fill tool comes standard with pressure gauge and 5 pack replacement needles. Compatitble with FOX and Arctic Cat ACT shocks. 400 psi capacity. 20 pack of replacement needles are also available.
|
| |
Gas Fill Tool & Gauge
(Reference #390300)
$222.95 | Gas Fill Tool & Gauge
0 In Stock
| |
Replacement Needles
(Reference #390301)
$32.95 | 20 Pack Needles
6 In Stock
| |
|
Inflation Gauge & Valve Assembly(Reference #155-374)
For shocks with Schrader valves
600 psi capacity
0 In Stock
$162.95
|  |
| |
|
 | Shock Gauge and Filler(Reference #08-0072)
For shocks with Schrader Valves
300 psi capacity
Bleeder valve and T-handle plunger pin chuck
Swivel chuck has a 12" flexible hose
Instructions, carrying box and Schrader valve extension included
0 In Stock
$222.95
|
| |
|
Needle Kit(Reference #08-0075)
Nitrogen needle is used to fill shocks with self-sealing rubber valves
Use with Shock Gauge above (08-0072)
5 In Stock
$24.95
|  |
| |
|
Replacement Needle Only(Reference #08-0B75)
$4.95
10 In Stock |
|
For Needle Kit #08-0072 above.
|
|
Fox Float Air Canister - Fits Fox Float 1 & 2(Reference #155-FAC)
Increased air volume gives more linear shock action Simple and effective with no knobs, screws, or guesswork. East installation, no special tools required, adjusts with stock pump. Use one per shock.
SMALL CANISTER - increases air capacity by 4%. This best fits the more aggressive type riders who are looking to smooth out the ride at slower speeds but need faster, big bump bottoming resistance.
LARGE CANISTER - has 300% more capacity than the small canister. Extra big volume allows shock to stay soft through more of the travel before stiffening up. Great for riders who do most of their riding on groomed trails yet get at the big bumps occasionally.
|  |
| |
Fox Float Air Canister
(Reference #155-330)
$52.95 | Small
Aluminum
4 In Stock
| |
Fox Float Air Canister
(Reference #1553317)
$75.95 | Large
Aluminum
0 In Stock
| |
Fox Float Air Canister
(Reference #1553327)
$82.95 | Large
Black Anodized
0 In Stock
| |
|
 | Fox Float Pump(Reference #155-324)
300 psi dual air pump with 100 psi low pressure feature.
0 In Stock
$59.95
|
| |
|
 | Fox Float Fluid(Reference #FOX-FLUID)
|
| |
Fox Float Fluid
(Reference #155315)
$6.25 | 5cc Pillow Pack
0 In Stock
| |
Fox Float Fluid
(Reference #155316)
$33.95 | 8oz Bottle
0 In Stock
| |
|
Seal Protector(Reference #SEALPROT)
A bullet shaped tool used to install the bearing cap without damaging the seals.
|  |
| |
Seal Protector
(Reference #155-363)
$15.95 | 1/2"
5 In Stock
| |
Seal Protector
(Reference #155-912)
$15.95 | 5/8"
4 In Stock
| |
Seal Protector
(Reference #155-913)
$15.95 | 12.5mm (HPG & Kayaba)
2 In Stock
| |
|
Seal Lubricant(Reference #155-911)
This 1.5 gram packet of synthetic dielectric lubricant is a Silicone/Teflon blend used for shock rebuilding, electrical connections and anywhere lubrication is needed.
17 In Stock
$1.00
|  |
| |
|
 | Pik Set(Reference #155-367)
Set of 2 special brass tools to remove old seals and o-rings
4 In Stock
$13.95
|
| |
|
 | Body Holding Tool(Reference #BODYHOLD)
Used to hold shock, without damage, in a vice for service work.
NOTE: Always verify your shock body diameter
|
| |
Holding Tool
(Reference #155-320)
$29.95 | 1.625"
Standard Fox & ACT
Some Walker Evans
3 In Stock
| |
Holding Tool
(Reference #155-323)
$29.95 | 1.675"
Fox Zero Pro
Some HPG & Kayaba
4 In Stock
| |
Holding Tool
(Reference #155-321)
$29.95 | 2.00"
Some PPS, Fox
Linked Shock
15 In Stock
| |
|
Shaft Holding Tool(Reference #SHAFTHLD)
Used to hold the shaft while replacing eyelets.
|  |
| |
Shaft Holding Tool
(Reference #155-325)
$24.95 | 1/2" or 12.5mm
5 In Stock
| |
Shaft Holding Tool
(Reference #155-328)
$24.95 | 5/8" or 16mm
2 In Stock
| |
|
IFP Depth Tool(Reference #155-372)
Genuine Fox tool used to set the internal floating piston depth. Use with caliper for exact IFP depth measurements.
0 In Stock
$89.95
|  |
| |
|
 | Fox Spanner Wrench(Reference #155-322)
Fox tool to adjust spring tension on shocks with threaded adjusters.
5 In Stock
$5.95
|
| |
|
Spanner Wrench(Reference #810-300)
Used for adjusting the suspension shock's cam spring to increase or decrease spring pre-load.
11 In Stock
$16.95
|  |
| |
|
 | Klotz Shock Oil(Reference #KL-505)
5WT
Zero drag formula gives superior control
Thermally stable viscosity in extreme heat and cold
Non-foaming fluid eliminates fading
Anti-wear properties for extended shock life
Seal conditioner prevents seal hardening
Sold in quarts only.
$2 handling fee applies to 5 quarts.
35 In Stock
$13.95
|
| |
|
 | High Performance Fox Shox Oil(Reference #FOXPRFOIL)
5WT
Fox High Performance Oil is preferred by snocross racers. Non fade formula - fast, easy air bleed. Additional handling applies - $2.00 per quart / $5 per gallon (reflected in price).
|
| |
Fox Shox Oil
(Reference #155-515)
$19.95 | Quart
1 In Stock
| |
Fox Shox Oil
(Reference #155-520)
$74.95 | Gallon
2 In Stock
| |
|
Comet Shock Seal Kit(Reference #400149)
Click here for a Reference Guide
1 In Stock
$26.10
|  |
| |
|
Air Shock Covers(Reference #AIRSHK-CVR)
Perforated neoprene allows venting and airflow to keep shock cool. Neoprene material offers durable and effective protection from trail debris such as rocks, sticks, etc. Protects shock piston shafts from nicks and marring. Does not retain moisture. Easy installation.
|  |
| |
Air Shock Cover
(Reference #114-408)
$47.95 | Walker Evans Air Shock
(top photo)
2 In Stock
| |
Air Shock Cover
(Reference #114-409)
$47.95 | Fox Float Air Shock
(bottom photo)
0 In Stock
| |
|
 | Stud Boy Shock Covers(Reference #2458-00)
Protect your shocks from the elements while adding a custom look to your snowmobile! Fast and easy installation with Velcro Brand fastener, will fit shock springs form 11-13 inches. Give your sled attitude with Stud Boy shock covers! Sold per pair.
Click here for Snowmobile Applications
7 In Stock
$41.95
|
| |
|
 | Shock Cover(Reference #SHOCK-CVR)
PRO SERIES
Durable 600D coated nylon construction
Stretch elastic to secure bottom but allows for drainage
Neoprene seal on top with velcro strap to secure tightly
Full length velcro seam located on back to make installation easy
10" wide x 14" tall
Fits coil over shocks.
Sold per pair
|
| |
Shock Cover
(Reference #114-405)
$42.95 | BLACK
5 In Stock
| |
Shock Cover
(Reference #114-406)
$42.95 | RED
3 In Stock
| |
Shock Cover
(Reference #114-407)
$42.95 | YELLOW
5 In Stock
| |
|
Shock Covers(Reference #PMSHOCK-CVR)
Protects shocks from dirt and debris
Made from durable 600D Nylon with extra wide hook-n-loop closures and vent holes
Small covers fit springs up to 3" diameter x 11" long
Large Covers fit springs up to 3" diameter x 13" long
Sold individually
|  |
| |
Shock Covers
(Reference #14263)
$9.95 | SMALL
2 In Stock
| |
Shock Covers
(Reference #14264)
$9.95 | LARGE
1 In Stock
| |
|
 | Shock Shafts(Reference #155-SHAFTS)
FOX and ACT 1/2" stainless steel. Available in several lengths. LENGTH SHOWN IS THE OVERALL LENGTH OF THE SHAFT.
|
| |
Shock Shaft
(Reference #155-530)
$35.95 | 6.8"
5 In Stock
| |
Shock Shaft
(Reference #155-531)
$35.95 | 7.45"
8 In Stock
| |
Shock Shaft
(Reference #155-532)
$35.95 | 7.525"
2 In Stock
| |
Shock Shaft
(Reference #155-533)
$35.95 | 7.6"
4 In Stock
| |
Shock Shaft
(Reference #155-534)
$35.95 | 7.93"
2 In Stock
| |
Shock Shaft
(Reference #155-535)
$35.95 | 8.0"
1 In Stock
| |
Shock Shaft
(Reference #155-536)
$35.95 | 8.35"
8 In Stock
| |
Shock Shaft
(Reference #155-537)
$35.95 | 9.125"
1 In Stock
| |
|
Billet Spring Retainer(Reference #155-375)
Direct replacement for stock cast aluminum retainers that are famous for breaking. Fits Fox Shox on Polaris and Arctic Cat applications and ACT shocks. Sold individually.
2 In Stock
$14.95
|  |
| |
|
Shock Ride Height Spacer(Reference #155-SRHS)
FOR 1/2" SHAFT SHOCKS. Piston spacers for ACT & Fox shocks are a simple method of shortening the eye-to-eye measurement of the shock to lower the ride height of the sled for drag, speed run, or oval racing. The spacers can be stacked to adjust height reduction.
|  |
| |
|
| Ride Height Spacer for 1/2" Shaft Shocks |
Spacer
(Reference #155-369)
$4.95 | 1/2" Thick
28 In Stock
| |
Spacer
(Reference #155-370)
$5.95 | 1" Thick
25 In Stock
| |
