Snowmobile Racing Products | Hi-Performance Engineering

Snowmobile Parts - Delivered FAST at a FAIR price

Racing Products


	Quick Coupler Ref: 245-180 FOR 3/4" ID HOSE. Lightweight plastic quick couplers for your coolant hoses. Sold as a set (enough for 1 hose) 11 In Stock $32.95


Quick Coupler O-Ring Ref: 245-185 Replacement o-ring for quick coupler #245-180 above 0 In Stock $1.50		CURRENTLY OUT OF STOCK

Quick Coupler Adapter Ref: 245-182 1" to 3/4" (hose) aluminum adapter for quick coupler #245-180 above. 0 In Stock $10.00		CURRENTLY OUT OF STOCK

Suspension Wheel Kit Ref: 900-17KIT For Asphalt and Grass - A wheel kit for mounting in a forward (front of rails) position on the rails to prevent track spearing and reduce wear and drag where the track first meets the rail. This wheel kit fits most current models (9" rail centers). 8 3/4" shaft length. 3 1/4" diameter wheels.

2 Wheel Kit Ref: 900-171 $49.95	2 Wheel Kit 3 In Stock
3 Wheel Kit Ref: 900-172 $65.95	3 Wheel Kit 1 In Stock
4 Wheel Kit Ref: 900-175 $81.00	4 Wheel Kit 2 In Stock
3 1/4" Wheel Only Ref: 581-943 $16.95	3 1/4" Wheel Only 4 In Stock

Suspension Wheel Kit A special design for production suspensions. These wheel kits are the same as above except they feature a smaller 2 3/4" idler wheel. Arctic / Yamaha have 8 3/4" shaft length and Polaris / Ski-Doo have 8 5/8" shaft length.
Single Wheel Kit Ref: 900-181 $35.95	Single Wheel Kit Arctic/Yamaha 1 In Stock
Single Wheel Kit Ref: 900-182 $35.95	Single Wheel Kit Polaris / Ski-Doo 0 In Stock	CURRENTLY OUT OF STOCK
Dual Wheel Kit Ref: 900-183 $47.95	Dual Wheel Kit Arctic / Yamaha 5 In Stock
Dual Wheel Kit Ref: 900-184 $47.95	Dual Wheel Kit Polaris / Ski-Doo 1 In Stock
Centered Dual Wheel Kit Ref: 900-185 $47.95	Centered Dual Kit Arctic / Yamaha 1 In Stock
Centered Dual Wheel Kit Ref: 900-186 $47.95	Centered Dual Kit Polaris / Ski-Doo 2 In Stock
Triple Wheel Kit Ref: 900-187 $61.00	Triple Wheel Kit Arctic / Yamaha 0 In Stock	CURRENTLY OUT OF STOCK
Triple Wheel Kit Ref: 900-188 $61.00	Triple Wheel Kit Polaris / Ski-Doo 0 In Stock	CURRENTLY OUT OF STOCK
Quad Wheel Kit Ref: 900-189 $75.95	Quad Wheel Kit Arctic / Yamaha 0 In Stock	CURRENTLY OUT OF STOCK
Quad Wheel Kit Ref: 900-190 $75.95	Quad Wheel Kit Polaris / Ski-Doo 0 In Stock	CURRENTLY OUT OF STOCK

2 3/4" Wheel Only Ref: 581-945 For wheel kits listed above 0 In Stock $14.95		CURRENTLY OUT OF STOCK

	Single Suspension Wheels Ref: 900-ASW Wheel with rail mounting hardware $21.95

Single Suspension Wheel Ref: 900-522 $22.95	3 1/4" WHEEL with rail mounting hardware 7 In Stock
Single Suspension Wheel Ref: 900-180 $22.95	2 3/4" WHEEL with rail mounting hardware 1 In Stock
3 1/4" Wheel Ref: 581-943 $16.95	3 1/4" Wheel Only 4 In Stock
2 3/4" Wheel Ref: 581-945 $14.95	2 3/4" Wheel Only 0 In Stock	CURRENTLY OUT OF STOCK

Suspension Wheel Kit - Polaris Ref: 900-520 Custom built for Polaris Indys with Xtra Lite suspension. Wheel mounting blocks that allow the installation of 4 1/4" idler wheels anywhere on the rail. Designed to achieve the same height as the standard wheels. Sold as a set of two mounting blocks. Order wheels separately. 10 In Stock $29.95


	4 1/4" Idler Wheel - Black Ref: 581-171 0 In Stock $25.95
	CURRENTLY OUT OF STOCK

8" Drive Sprockets Ref: 8SPRKT 10 tooth, 2.52 pitch internal drive sprockets. Perfect for asphalt racing - larger diameter rolls the track with less resistance and 1 additional tooth eliminates ratchet or slippage. Available only in center sprockets. Outers must have teeth cut off. Sold individually. $39.00

8" Drive Sprocket Ref: 900-524 $39.00	1" HEX SHAFTS 0 In Stock	CURRENTLY OUT OF STOCK
8" Drive Sprocket Ref: 900-525 $39.00	1 1/16" HEX SHAFTS 1 In Stock
8" Drive Sprocket Ref: 900-526 $39.00	1 1/4" HEX SHAFTS 2 In Stock

Degree Wheel Ref: 08-092 This degree wheel is manufactured from .052" thick aluminum with a 6.75" outside diameter and a 6mm center hole. The black anodized finish allows for easy-to-read increments. May also be used on 4-stroke engines to check or alter cam timing. 10 In Stock $18.95


	Asphalt Racing Ski Ref: 900-544 This aluminum ski weighs only 4 pounds and is super strong. Special for asphalt running. Billet aluminum wheels with rubber molded around the outside diameter. This wheel was designed for asphalt skis. Sold per pair. Two wheels per ski. Approved for use in NSSR & NHRA. $5 additional handling applies - reflected in price. 0 In Stock $465.00
	CURRENTLY OUT OF STOCK

Wheel for Asphalt Ski Ref: 900-549 Wheel only for #900-544 ashapt racing ski above. Sold individually. 2 In Stock $59.95

	Air Density Gauge Ref: 725-160 As air density changes with weather conditions, you should re-jet your carb to keep best power and sharp response. This meter will tell you when and how much to re-jet with a quick glance. No complicated math to do. Keep your motor running sharp week after week with a minimum of effort. Supplied with padded carrying case. CANNOT SHIP VIA AIR. 1 In Stock $144.95


Rad Wheel Ref: 725-162 A handy circular slide rule that fits over the air density gauge and gives the change in jet size. Main jet range: 140 - 720. For Mikuni hex main jets. Instruction Sheet 1 In Stock $16.95


	Plastic Drag Ski Ref: PDS-BLK High quality compression molded ski Reduces weight - less than 2 lbs each Reduced friction 24" long - 4" wide 2" spindle width Sold per pair Order mounting kit seperately Order wearbars seperately ONLY AVAILABLE IN BLACK

Plastic Drag Skis Ref: 15877 $132.95	Black Skis Without Wearbars 13 In Stock
Ski Mounting Kit Ref: 15893 $42.95	Universal Mount Installation Instructions 5 In Stock
Carbide Runners - Pair Ref: SXA-1200 $66.95	Woody's Runners 4" - 60 Degree Carbide 1 In Stock
Carbide Runners - Pair Ref: 15903 $51.95	PowerMadd Runners 5" - 60 Degree Carbide 4 In Stock
Carbide Runners - Pair Ref: 15902 $32.95	PowerMadd Runners 3" - 120 Degree Carbide 0 In Stock	CURRENTLY OUT OF STOCK
Steel Runners - Pair Ref: 15901 $28.95	Standard Steel Runners 8 In Stock

Two Piece Throttle Block Ref: 200-201 A two piece bolt on throttle block - no need to remove the grip to install. It will pull up to 46mm. Aluminum - only available in black. 1 In Stock $37.95


	Throttle Block with Lever Ref: 13594 Same two piece bolt on throttle block as above with lever included. 6 In Stock $47.95


Long Throw Handle Assembly Ref: 200-205A Aluminum with plastic lever 3 In Stock $42.95


Thumb Lever Ref: 200-215 $2.95 44 In Stock
Thumb lever only for above assembly

Fuel and Lube Tank Assembly Ref: FUEL/LUBE Ready for hook up. Assembly includes: one quart tanks a mounting bracket caps clamp fuel line fittings

Single Tank Assembly Ref: 900-424 $59.95	5 In Stock
Dual Tank Assembly Ref: 900-422 $99.95	0 In Stock	CURRENTLY OUT OF STOCK
Individual Tank Ref: 0670-065 $27.95	7 In Stock
Tank Cap Ref: 0670-514 $7.95	6 In Stock

	Aluminum Drag Ski Ref: ALUMSKI Genuine Wahl Bros Heavy duty but lightweight Designed and manufactured especially for drag racing ISR legal 26.5" long including loop $2 handling applies to each ski

Drag Ski w/Spring Ref: 900-125 $117.00	2" spindle width 4 lbs eac Sold individually $2 handling reflected in price 4 In Stock
Runner - Standard Ref: 900-127 $9.95	Sold individually 3 In Stock
Carbide Runner Ref: 900-132 $36.00	2" carbide Sold per pair 1 In Stock