| | |
 | Trac-LinkTM Ref: 210511
Patent Pending
Trac-LinkTM is a new innovation aimed at giving you the ability to adjust traction and balance characteristics of your any make/model snowmobile quickly and easily. Trac-LinkTM replaces the OEM limiter-straps with an ultra-strong Goodyear strap combined with the aluminum adjustment mechanism to give you 3 full inches of infinite adjustment with a simple turn of a 1/2 or 13mm wrench. Trac-LinkTM weights just 15oz including the strap and all necessary hardware and is adaptable to any rear suspension that employs conventional limiter-straps*.
*Does not fit Yamaha Mono-shock rear suspensions or 2007-10 Polaris Dragon
4 In Stock
$67.95
|
|
|
Wilwood Brake Cylinder Kit for Polaris Ref: 525-200
This master cylinder kit provides more braking power with less hand effort. Two finger brake lockup allows all required braking power still gives you a secure grip on the handlebar.. For all Indy models with Polaris hydraulic brakes.
10 In Stock
$110.95
|  |
|
|
 | SLP Boost Bottle for Polaris Twins Ref: SLPBB
The SLP plastic Boost Bottle helps correct reed valve pressure balance to improve low to midrange driveability, throttle response, fuel economy and horsepower. A must for stock or modified twins. Air screw and/or pilot jet changes may be needed. Complete instructions included.
|
|
Boost Bottle
Ref: 200-159
$41.95 | 700 XC/RMK 2001-05
800 XC/RMK 2000-05
Instructions
7 In Stock |
|
Boost Bottle
Ref: 200-158
$41.95 | 500, 600 w/VES 1999-02
Instructions
5 In Stock |
|
|
Nose Cone Block Off Kit Ref: 32-569
Fits 2011-12 Polaris Pro RMK
The stock belly pan on the Polaris Pro RMK chassis is open to the rear side in the center. When riding in deep snow conditions (12 inches or more of loose snow) this opening allows snow to pack into the belly pan under the pipe. The pipe creates enough heat that the snow melts and refreezes into a massive chunk of ice. This kit helps eliminate this problem by blocking the snow from packing in. Kit includes a formed aluminum block off plate and hardware.
Click here to see a photo of the Block Off Kit installed
1 In Stock
$23.95
|  |
|
|
 | Oil Injection Elimination - Arctic Cat Ref: 20005
An oil injection elimination you do not have to maintain. Uses a lubricant injected bushing, this means no greasing. Install and forget about it! Fits 2005 and newer 700, 800 and 1000 engines.
2 In Stock
$28.95
|
|
|
Oil Injection Cover for Polaris Ref: 200-OICOVER
Fits oil injection Polaris models with Fugi engines. Plugs are available to maintain case volume.
|  |
|
Oil Injection Cover
Ref: 200-806
$14.95 | COVER
2 In Stock |
|
Plug
Ref: 200-809
$14.95 | PLUG (All except Storm)
1 In Stock |
|
|
 | Suspension Drop Brackets Ref: SUSP-BRKT
High quality 1/4" thick 6061 aluminum. Drop measurement is from the bottom of the running board. Sold per pair.
|
|
Suspension Drop Brackets
Ref: 560-405
$118.95 | 1 3/4" Drop
1 In Stock |
|
Suspension Drop Brackets
Ref: 560-406
$118.95 | 3 1/4" Drop
0 In Stock |
CURRENTLY OUT OF STOCK |
Suspension Drop Brackets
Ref: 560-409
$118.95 | 4 1/2" Drop
0 In Stock |
CURRENTLY OUT OF STOCK |
Suspension Drop Brackets
Ref: 560-404
$118.95 | 5" Drop
0 In Stock |
CURRENTLY OUT OF STOCK |
|
Yamaha Apex Drop Brackets Ref: 560-403
Fits 2006-10Save 6.5 lbsDirect bolt on - replaces heavy stock bracketsSame drop as stock brackets
3 In Stock
$142.95
|
|
|
REV XP Drop Brackets Ref: 560-401
Fits Rev XP Chassis 2008-111 1/2" dropMounting hardware included
1 In Stock
$142.95
|
|
|
'Add On' Drop Bracket Ref: 560-402
1" to 2" drop Bolts to original drop bracket Fits most sleds Easy installation Necessary hardware included Sold per pair
0 In Stock
$71.95
|  |
CURRENTLY OUT OF STOCK |
|
 | Air Vent Ref: 200-257
This new stream-lined vent adds a sporty appearance, but most important, it removes unwanted hot underhood air that robs performance. Can be located on any flat or near flat surface for hot air excaped or reversed for cold air inlet. Supplied in black but is paintable. Universal fit. 3 1/4" x 12 1/4"
3 In Stock
$18.95
|
|
|
Arctic Cat Foot Stirrup Ref: 20011
Fits 2007-11 M Series and Crossfires
2 In Stock
$17.95
|  |
|
|
 | Chromoly Handlebars Ref: 900-CMH
4130 Chromoly steelSnowmobile specific bends offer better comfortFits 7/8" handlebar clampsNo rise flat design offers more surface area for controlsGuide lines on ends of bar for narrowing handlebar to a custom widthAccepts standard hooksAvailable in black only
|
|
|
Chromoly Handlebar
Ref: 900-855
$33.95 | 10o Pull Back - 31 1/2"
4 In Stock |
|
Chromoly Handlebar
Ref: 900-843
$33.95 | 15o Pull Back - 29 1/4"
(top photo)
3 In Stock |
|
Chromoly Handlebar
Ref: 900-844
$33.95 | Race Bend
10o Pull Back - 30"
(bottom photo)
0 In Stock |
CURRENTLY OUT OF STOCK |
|
 | RSI Chromoly Rise Handlebars Ref: 900-CMH2
7/8" Chromoly steel construction10 Degree pullback29 1/2" wideAvailable in 2", 4", 6" and 8" heightsCustom cut to width guide marks for narrowing bars to rider preferenceAccepts RSI handlebar hooks and OEM handlebar hooksBlack finish
|
|
Chromoly Rise Handlebar
Ref: 900857
$37.95 | 2" Rise
0 In Stock |
CURRENTLY OUT OF STOCK |
Chromoly Rise Handlebar
Ref: 900858
$37.95 | 4" Rise
1 In Stock |
|
Chromoly Rise Handlebar
Ref: 900859
$37.95 | 6" Rise
3 In Stock |
|
Chromoly Rise Handlebar
Ref: 900860
$37.95 | 8" Rise
2 In Stock |
|
|
 | Aluminum Rise Handlebars Ref: 9007
2014 heat treated aluminum has superior strength to resist bending Snowmobile specific 10 degree bend offers increased comfort Fits 7/8" handlebar clamps Crossbar has pre drilled holes for stud or bolt mounted style of mountain / Grab strap (not included) Guide lines on ends of bar for narrowing handlebar to a custom width Black bar pad included Black color only
|
|
|
Handlebar
Ref: 900849
$56.95 | 7" Rise
2 In Stock |
|
Handlebar
Ref: 900850
$56.95 | 5" Rise
0 In Stock |
CURRENTLY OUT OF STOCK |
Grab Strap
Ref: 13580
$37.95 | Optional Grab Strap
3 In Stock |
|
|
 | Tapered Aluminum Handlebars Ref: 900-TAPER
7075-T6 heat treated aircraft aluminum Tapered wall aluminum flexes to reduce rider fatigue and arm pump Tapered wall construction offers the strongest snowmobile handlebar available Clamp surface is 1 1/8" and tapers down to 7/8" to fit standard controls and grips Black snowmobile bar pad included 1 1/8" oversized clamp kit or 1 1/8" size risers are required to mount to snowmobile (not included) Custom snowmobile specific bends offer more comfort than stock handlebars Guide lines on ends of bar for narrowing handlebar to a custom width
|
|
|
Handlebar
Ref: 900851
$65.95 | Backcountry Bend29" with 3 1/4" Rise & 14o Pullback
12 In Stock |
|
Handlebar
Ref: 900852
$65.95 | Backcountry Bend29 1/4" with 15o Pullback
0 In Stock |
CURRENTLY OUT OF STOCK |
Handlebar
Ref: 900853
$65.95 | Backcountry Bend31 1/2" with 10o Pullback
2 In Stock |
|
Handlebar
Ref: 900854
$65.95 | Race Bend30" with 2mm Rise & 10o Pullback
4 In Stock |
|
Clamp Kit
Ref: 900856
$27.95 | 1 1/8" Clamp Kit
6 In Stock |
|
|
Aurora Rod Ends Ref: RODENDS
HEAVY DUTY - High performance Aurora teflon lined zinc plated aviation style rod ends for tie rods and radius rods. The teflon lining keeps the joints tight and eliminates free play in the steering and front end. Supplied with jam nuts. AIRCRAFT QUALITY.
Standard duty tie rod ends are also available
|  |
|
Rod End
Ref: 202-230
$15.95 | 3/8" RH Rod End
25 In Stock |
|
Rod End
Ref: 202-232
$18.95 | 7/16" RH Rod End
16 In Stock |
|
Rod End
Ref: 202-234
$21.95 | 1/2" RH Rod End
23 In Stock |
|
Rod End
Ref: 202-240
$15.95 | 3/8" LH Rod End
21 In Stock |
|
Rod End
Ref: 202-242
$18.95 | 7/16" LH Rod End
7 In Stock |
|
Rod End
Ref: 202-244
$21.95 | 1/2" LH Rod End
4 In Stock |
|
|
 | Polaris Steering Block Ref: 900-558
Steering block and the upper support bushing for Polaris steering columns will permanently eliminate handlebar play. The block is made of billet aluminum and the bushing is a durable plastic. The whole assembly is strong and lightweight. 2 piece for easy installation. Fits all with 7/8" steering post except Edge, Pro X, IQ, Fusion and Rush.
5 In Stock
$52.95
|
|
