| | |
 | Universal Drop Rack(Reference #5940)
Fits all utility ATV's with rear racks. Installs and removes fast with just four bolts. Constructed of heavy duty square tubing.
Utilizes - 16 gauge metal bottom and back panel so your cargo stays dry. Vented rear panel for drainage.
Rear basket can be removed for trail riding. Powder coat painted for a durable finish.
1 In Stock
$199.95
|
| |
|
 | Pail PalTM(Reference #PAILPAL)
Woody's introduces the Pail PalTM - an ATV/UTV Bucket Hauler System. The Pail PalTM provides the rider with more space by freeing up racks for bulkier cargo and a level of safety with a design that attaches at the hitch which lowers the center of gravity. In addition, it reduces lifting distance by 50% and is easy to install and uninstall. It is made of heavy gauge steel for strength and powder coated for a durable finish. Woody's unique design allows the Pail PalTM to be removed with the pull of a pin. No tools needed!
Click here to see a photo of the Pail Pal in use
|
| |
Pail Pal
(Reference #895-037)
$69.95 | 1 1/4" Receiver
1 In Stock
| |
Pail Pal
(Reference #895-038)
$69.95 | 2" Receiver
1 In Stock
| |
|
Eagle Winch Kits(Reference #WINCH-KIT)
42' cable & hook
Super roller fairlead
Compact handlebar switch / electronics
Snatch block & hook
Complete instructions
|  |
| |
Winch Kit
(Reference #1920)
$156.95 | 2500 LB
2 In Stock
| |
Winch Kit
(Reference #1925)
$256.95 | 3500 LB
1 In Stock
| |
|
 | Universal ATV Bar Riser(Reference #UNIV-ABR)
Works on most brands of ATVs and motorcycles with 7/8" bars and front to back bolt spacing between 1.197" and 1.36" center to center.
Two models - 1" (25mm) and 1.6" (40mm)
Standard and metric bolts included.
Click here to see a photo of the riser installed
|
| |
Universal ATV Bar Riser
(Reference #15301)
$33.95 | 1" (25mm)
2 In Stock
| |
Universal ATV Bar Riser
(Reference #15302)
$37.95 | 1.6" (40mm)
11 In Stock
| |
|
K&N PowerLid(Reference #KN-POWERLID)
Replaces stock air box lid. Snaps in place with no air box modification needed.
Increases air flow while maintaining stock air box.
Designed to increase horsepower and throttle response.
Eliminates restrictive intake snorkels.
Carburetor jet selection kit included if required.
Washable and reusable K&N filter element
Dyno tested
NOTE: The K&N PowerLid is desinged for air flow management only. Do not use without the primary air filter fitted to the intake system. Not intended for use in water or muddy conditions.
|  |
| |
K&N PowerLid
(Reference #HA-4099-T)
$116.95 | HONDA
TRX400EX 1999-06
1 In Stock
| |
K&N PowerLid
(Reference #HA-4504-T)
$134.95 | HONDA
TRX4050R 2004-05
1 In Stock
| |
K&N PowerLid
(Reference #SU-4002-T)
$98.95 | KAWASAKI
KFX400 2003-06 and
SUZUKI
Z400 Quadsport 2003-06
1 In Stock
| |
K&N PowerLid
(Reference #YA-6601-T)
$113.95 | YAMAHA
YFM660 Raptor 2001-05
1 In Stock
| |
K&N PowerLid
(Reference #YA-3502-T)
$116.95 | YAMAHA
YFZ350 Banshee 1987-06
1 In Stock
| |
K&N PowerLid
(Reference #YA-4504-T)
$101.95 | YAMAHA
YFZ450 2004-06
1 In Stock
| |
|
ATV Wheel Spacers(Reference #859-001)
Increased stability
3" wider (1 1/2" per spacer)
Manufactured from 6061-T6 aluminum
4x110mm bolt pattern
Do not have to remove OE studs
Easy bolt on installation
Sold per pair
0 In Stock
$75.95
|  |
| |
|
 | ATV Utility Rope(Reference #120-094)
The atv utility rope is perfect for hunting, fishing and camping trips. Use to haul equipment or hold items on the racks. 12' length with a metal hook on one end.
0 In Stock
$13.95
|
| |
|
ATV Tow Strap(Reference #120-091)
This heavy duty yellow poly tow strap is rated at 5000 pounds tensile strength. It has a loop at each end and is designed specifically for towing quads. A zinc-plated steel shackle is provided for easy and secure hook-ups. Stow it in the convenient mesh bag.
4 In Stock
$13.95
|  |
| |
|
 | ATV Tool Kit(Reference #725-023)
Your vehicle may have come with a tool kit, but the only virtue is that it was free. This kit is major upgrade in quality and content over OEM tool kits. Contains:
8, 10, 12, 14mm combination wrench
8" adjustable
4 Torx
6 in 1 screwdriver
2 plug wrench
Gap gauge
Locking plier
Flashlight
Tape
Wire
Cable Ties
Pressure gauge
and more - all in a 6" x 9" polyester pouch
1 In Stock
$56.95
|
| |
|
Miniset Compact Metric Tool Kit(Reference #725-031)
Powerful, yet compact ratchet and socket set
Midget 1/4 drive ratchet with 2" extension and 8 sockets
Includes hex and #2 Phillips bits
Top grade polished chrome tools; lifetime guaranteed
Includes tough carrying case
1 In Stock
$42.95
|  |
| |
|
 | Digital Tire Pressure Gauge(Reference #162)
Accurate digital tire pressure readings!
Reads in PSI, KPa & Bar
Backlit LCD display
Built-in LED flashlight can be used while taking readings
Measurement Range:
- 5 to 100 PSI
- 0.4 to 6.80 Bar
- 35 to 680 Kpa
Resolution: 0.1 PSI / 0.01 Bar / 1 Kpa
Accuracy: +- (1%+0.5) PSI
Uses (2) "AAA" batteries (included)
0 In Stock
$16.95
|
| |
|
TirePro Digital Tire Gauge(Reference #725-033)
The TirePro Digital Tire Gauge is ideal for motorcycle and ATV use, with a large display and accuracy over a wide range of pressure levels. Readings are shown to 0.1 psi levels, with bar, Kpa, and KG-cm2 scales also provided. An ergonomic shape fits nicely in your hand.
1 In Stock
$15.95
|  |
| |
|
 | Tire Lever Set(Reference #725-034)
Changing tires is about as much fun as painting your house, but having the right tools can make the job easier. Our tire levers are forged and heat treated, using carbon steel alloy. They'll flex, not bend, giving you confidence. At 240mm (9"), they're long enough for necessary leverage, but small enough to fit into most fanny packs, saddlebags or tank bags. Sold as a set of 2.
1 In Stock
$13.95
|
| |
|
 | Polaris Shift Knobs(Reference #SHIFTKNOB)
Personalize your Polaris ATV with a colored shift knob.
|
| |
Shift Knob - Red
(Reference #930010)
$9.95 | RED
5 In Stock
| |
Shift Knob - Light Green
(Reference #930011)
$9.95 | LIGHT GREEN
1 In Stock
| |
Shift Knob - Dark Green
(Reference #930015)
$9.95 | DARK GREEN
2 In Stock
| |
|
Hand Shifters(Reference #HAND-SHIFT)
Hand operated shift lever mounts to foot shift lever
Great for mud & water riding - shift without getting your feet wet
20" or 14" available for most models to match your preference.
Click here to see a photo of the hand shifter on the ATV
Application Chart
|  |
| |
Hand Shifter - 20"
(Reference #4620)
$23.95 | #4620 - 20"
3 In Stock
| |
Hand Shifter - 20"
(Reference #4698)
$23.95 | #4698 - 20"
2 In Stock
| |
Hand Shifter - 20"
(Reference #4054)
$23.95 | #4054 - 20"
2 In Stock
| |
Hand Shifter - 14"
(Reference #4632)
$23.95 | #4632 - 14"
1 In Stock
| |
|
 | Shock Covers(Reference #SHOCK-COVER)
Durable 600D coated nylon construction
Stretch elastic to secure bottom but allows for drainage
Neoprene seal on top with velcro strap to secure tightly
Velcro seam located on back to make installation easy
Sold per pair
Black only
Application Chart
|
| |
Shock Covers
(Reference #114-401)
$37.95 | 114-401
2 In Stock
| |
Shock Covers
(Reference #114-402)
$37.95 | 114-402
2 In Stock
| |
Shock Covers
(Reference #114-403)
$37.95 | 114-403
1 In Stock
| |
Shock Covers
(Reference #114-404)
$28.95 | 114-404
2 In Stock
| |
|
RaiderTM MX Glove(Reference #MX-GLOVE)
Not made for snowmobiling
Velcro wrist closure
Cool mesh back with protective padding
Suede palm for grip
|  |
| |
MX Glove
(Reference #114-013)
$6.95 | Medium
1 In Stock
| |
MX Glove
(Reference #114-014)
$6.95 | Large
1 In Stock
| |
MX Glove
(Reference #114-015)
$6.95 | X-Large
0 In Stock
| |
