| | |
 | Universal Template(Reference #COMB-TEMP)
The studding experts at Woody's have designed a template that includes the Trail Template, Double Digger and the Performance Template patterns on ONE TEMPLATE. The Woody's Universal Template will have patterns from 48 to 192 studs with exception of the 72 stud pattern. One template gives you the ability to add to your stud pattern without waiting for a different template. Constructed from heavy card stock with a laminate protective cover that will fit 15" wide track configurations.
Technical Info
3 In Stock
$12.95
|
| |
|
Universal Template(Reference #COMB-TEMP-P)
$25.95
4 In Stock |
|
For those that will use the template a number of times, this template is the same as the COMB-TEMP above, except it is clear polycarbonate.
Technical Info |
|
13.5" Template - 128" & 144" Track(Reference #FCSC-TEMP)
For 13.5" wide track as used on Firecat & Sabercat. 128" and 144" track lengths
Technical Info
3 In Stock
$15.95
|  |
| |
|
 | 128" Track Template(Reference #128-TEMP)
For 14" and 15" wide x 128" tracks
0 In Stock
$20.95
|
| |
|
Long Track Template(Reference #LONG-TEMP-2)
A special Long Track Template to fit tracks 15" x 136" and 15" x 144" with an added cut-away feature to make expandable for 16" wide tracks. It has multiple options for center belt studding with or without Double Digger support plates.
Technical Info
5 In Stock
$20.95
|  |
| |
|
Woody's Track Templates
|
|
Single Ply Track Template
(Reference #725-941)
$15.95 | 2.52 Pitch - Single Ply
7 In Stock
| |
Single Ply Track Template
(Reference #725-940)
$20.95 | 2.86 Pitch - Single Ply
5 In Stock
| |
2 Ply Track Template
(Reference #725-943)
$20.95 | 2.86 Pitch - 2 Ply
2 In Stock
| |
Single Ply Track Template
(Reference #725-942)
$20.95 | 3.00 Pitch - Single Ply
1 In Stock
| |
|
Studding Template(Reference #725-921)
Use this guide to mark out patterns for 72, 96, 120, 144 or super aggressive pattern of 192 studs on 48 rib tracks. You have the option of using the guide to mark out a pattern before you drill or drill right through this metal template. LIMITED TO CURRENT STOCK
1 In Stock
$14.95
|
|
|
 | Track Marker(Reference #TRAK-MARK)
5 In Stock
$7.95
|
| |
|
Snowmobile Track Cutting Tool(Reference #08-0430)
Reduces stud installation time by half when used in conjunction with #08-0431 Stud Installation Tool (below).
Consistently cuts precise, straight hole in the track, free of ragged edges to reduce stud pullout. Eliminates risk of damage to the undercarriage or bogie wheels caused by conventional plug cutters inadvertently plunging through the track.
No power tools needed for track or field installations.
Longwearing Acme thread only requires a couple turns of the handle to cut a hole in the track.
Handle tube conveniently stores up to 150 track plugs for easy disposal.
A small hole in the handle tube allows an air nozzle to be used to remove stubborn track plugs.
Replaceable heat treated 3/8" (9.5mm) diameter steel cutter.
Cutter stop can be turned over and replaced when worn out.
Cutaway section on body surrounding Acme thread provides unobstructed view of stud locating marks placed on the track.
Sturdy zinc plated steel construction will provide years of service.
1 In Stock
$94.95
|  |
| |
|
 | Snowmobile Stud Installation Tool(Reference #08-0431)
Reduces stud installation time by half when used in conjunction with #08-0430 Stud Cutting Tool (above).
No more blisters caused by pushing the stud through the track by hand.
Works with studs with a head diameter up to 1 ¼" (32mm), thread size up to 15/32" (12mm) and length up to 2 3/16" (56mm).
Can reach 8 ¼" (210mm) from the edge of the track (a bit more than half-way across a standard 15" track).
Sturdy zinc plated steel construction will provide years of service.
0 In Stock
$82.95
|
| |
|
 | Track Cutter(Reference #TC-CUTTER)
Cust neat, clean hole in track for easy installation of studs. Can be used in hand drill or drill press. Ejects rubber slugs automatically. These are heavy duty, shop grade track cutter tools. Manufactured from top quality drill rod. Can be resharpened several times.
|
| |
Track Cutter
(Reference #TC-15)
$9.95 | For 1/4" T-Nut Studs and
7mm Push Thru
56 In Stock
| |
Track Cutter
(Reference #TC-16)
$9.95 | For 7mm T-Nut Studs and
5/16" Push Thru
17 In Stock
| |
|
Stud Tool(Reference #725-925)
Use this tool for installing and removing push-through studs. The handle is made from premium aluminum. Each tool comes with an extra hex bit.
10 In Stock
$23.95
|  |
| |
|
Replacement Hex Bits(Reference #725-934)
Set of 2 replacement hex bits for stud tool #725-925 listed above.
3 In Stock
$5.95
|
|
|
Socket Style Nut Puller(Reference #NUTPULLER)
Reduces studding time by quickly setting T-nut into track
|  |
| |
Nut Puller
(Reference #725-920)
$14.95 | 7mm
2 In Stock
| |
Nut Puller
(Reference #NP-10)
$14.95 | 1/4"
1 In Stock
| |
|
 | Square Support Plate Indexing Tool(Reference #SPI-TOOL)
The square support plate indexing tool is a real time saver. Attach the tool directly to a standard 3/8" ratchet, align the square support plate flush with the track lugs, and then tighten the nut. Aligning the support plates can contribute to track longevity and your safety.
|
| |
Indexing Tool
(Reference #SPI-TOOL-7)
$18.95 | For 7mm Square Backers
0 In Stock
| |
Indexing Tool
(Reference #SPI-TOOL-5)
$18.95 | For 5/16" Square Backers
1 In Stock
| |
|
 | Triangle Support Plate Indexing Tool(Reference #SPI-TOOL-T)
Same tool as above - except this one is for triangle backers. Can be used with 7mm & 5/16 backers.
0 In Stock
$24.95
|
| |
|
Track Tension Tool(Reference #TRAK-TOOL)
Make sure the tension of your track is correct. Use Woody's Track Tension Tool to help stay within the manufacturer's guidelines.
6 In Stock
$36.95
|  |
| |
|
 | Spec Gauge(Reference #ASG-4100)
This gauge is a must for all serious racers and race tech people. It checks the race legal installation of studs and carbide runners particularly if you are sharpening your own.
2 In Stock
$14.95
|
| |
|
Hand Grinding Wheel(Reference #AGW-4500)
Here is a handy device for sharpening carbides right on the skis. This thin, 4 1/2" wheel fits most hand grinders. (Follow manufacturers safety instructions) 4 1/2" black silicon wheel
7 In Stock
$7.95
|  |
| |
|
Carbide Grinding Wheel(Reference #AGW-WHL)
This special grade grinding wheel is designed for sharpening just carbide runners and studs. It will help maintain sharp edges and points or alter stud point angles. Not recommended for general grinding. Includes arbor shim. (Follow manufacturers safety instructions)
|  |
| |
Grinding Wheel
(Reference #AGW-4000)
$22.95 | 1/2" Wide x 6"
1 In Stock
| |
Grinding Wheel
(Reference #AGW-4100)
$30.95 | 1" Wide x 6"
1 In Stock
| |
Grinding Wheel
(Reference #AGW-4200)
$32.95 | 1" Wide x 7"
0 In Stock
| |
|
 | Shallow Socket Tool(Reference #SCW-TOOL)
Woody's developed a unique shallow socket for installing studs without touching the surface of the support plate. Works ideal with colored support plates. The 5/16" socket is deep enough to install studs up to 1.575" length.
|
| |
Shallow Socket Tool
(Reference #SCW-4500)
$19.95 | 7mm
1 In Stock
| |
Shallow Socket Tool
(Reference #SCW-4505)
$19.95 | 5/16"
1 In Stock
| |
|
 | Race Stud Gauge(Reference #2287-00)
Zinc plated steelConvenient hole to hang on workbenchMaximum stud height of 3/8" for oval/snow crossMaximum stud height of 3/4" for dragsMaximum wearbar height 5/8" and width 5/8"Minimum wear bar height 5/8" and width 1/2"Maximum carbide in runner 10"Maximum 60 degree angle on carbide runnerMaximum width of backer plate 2 1/4"Minimum 3 3/4" traction device from edge of track
2 In Stock
$13.95
|
| |
|
Ski-Doo Coolant Hose Protector(Reference #298-106)
A must when studding the S-2000, F-2000 or CK3 chassis. Instructions and mounting harware included.
Installation Instructions
2 In Stock
$14.95
|  |
| |
|
Stud Sharpener(Reference #725-SHARP)
FOR STEEL STUDS ONLY - NOT CARBIDE TIPPED STUDS
Sharpen 300 steel studs accurately in less than a 1/2 hour - 30, 45 or 60 degree pointRecommedned by stud manufacturers and the fastest racers - produces a needle pointKeep your studs in spec - unique clog proof design prevents reduction in stud lengthFour precision, chip resistant inserts can be rotated 8 times for long lasting durability
|  |
| |
Stud Sharpener
(Reference #725-922)
$67.95 | 60 Degree Tip
1 In Stock
| |
Stud Sharpener
(Reference #725-923)
$67.95 | 45 Degree Tip
2 In Stock
| |
Stud Sharpener
(Reference #725-924)
$67.95 | 30 Degree Tip
0 In Stock
| |
|
Sharpener Rebuild Kit(Reference #725-933)
Includes replacement carbide inserts for stud sharpener above.
11 In Stock
$19.95
|
|
|
 | Loctite® Threadlocker(Reference #LOC-2900)
Woody's® introduces this "wicking" style threadlocker to the snowmobile industry. #290 Threadlocker uses capillary action to penetrate into the threads after t-nut style studs are installed in the track. 6ml
1 In Stock
$16.95
|
| |
